WYO Vishay Draloric Ceramic AC Capacitors Class X1, 440 VAC/Class Y2, 250 VAC DESIGN: D Max. Disc capacitors with epoxy coating S Max. 3 Max. (X1): (Y2): 250 VAC, 50 Hz (IEC 60384-14.2) 250 VAC, 60 Hz (UL1414, CSA C22.2) V ± 0.5 DIELECTRIC STRENGTH BETWEEN LEADS: Ø 0.6 ± 0.05 • Dimensions in mm Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. Z [Ω] COMPLIANT 440 VAC, 50 Hz (IEC 60384-14.2) L = 30 - 3 F±1 RoHS RATED VOLTAGE UR: 102 Component test: 2500 VAC, 50 Hz, 2 s, for parts with pitch ≥ 7.5 mm As repeated test admissible only once with 2000 VAC, 50 Hz, 2 s Random sampling test (destructive test): 1500 VAC, 50 Hz, 60 s DIELECTRIC STRENGTH OF BODY INSULATION: 2000 VAC, 50 Hz, 60 s (destructive test) DISSIPATION FACTOR tan δ: 101 ≤ 25 • 10-3 INSULATION RESISTANCE Ris: 10 ≥ 6 • 109 Ω CATEGORY TEMPERATURE RANGE ϑA: 10-2 0.1 1 1 nF 5 nF 2.5 nF 12 nF 10-1 (- 40 to + 125) °C CLIMATIC CATEGORY ACC. TO EN60068-1: 100 10 f I~ [µA] 40/125/21 [MHz] I = f (UR) (typ.) COATING: 500 10 nF Epoxy, dipped, insulating, flame retarding acc. to 5 nF UL 94V-0 400 3.3 nF TAPING AND SPECIAL LEAD CONFIGURATIONS: On request 300 2.2 nF MARKING (EXAMPLE): 200 1.0 nF 100 0 0 50 100 150 200 250 UR [V~] www.vishay.com 44 440 ~ X1 WYO 2n2 M 250 ~ Y2 WYO 1 nF to 2.5 nF WYO 4n7 M IEC 384-14/2 440 250 250 ~ X1 Y2 WYO 3.3 nF to 12 nF All approval marks are also shown on the label. For technical questions contact: [email protected] Document Number: 22202 Revision: 31-Jan-06 WYO Ceramic AC Capacitors Class X1, 440 VAC/Class Y2, 250 VAC Vishay Draloric ORDERING INFORMATION, CERAMIC X1 / Y2 CAPACITORS WYO CAPACITANCE (pF) TOL. (%) Dxs (mm) 1000 6.5 x 4.5 1500 8.0 x 4.5 1800 8.0 x 4.5 2200 9.0 x 4.5 2500 9.0 x 4.5 3300 10.0 x 4.5 ± 20 % 4700 F ± 1* (mm) d ± 0.05* (mm) 12.0 x 4.5 6800 17.0 x 4.5 8200 17.0 x 4.5 0.010 µF 21.0 x 4.5 0.012 µF 21.0 x 4.5 ORDERING CODE WYO102 CM KR WYO152 CM KR WYO182 CM KR 5.0 WYO222 CM KR 1.4 WYO252 CM KR WYO332 CM KR 0.6 12.0 x 4.5 5000 V ± 0.5* (mm) WYO472 CM KR WYO502 CM KR WYO682 CM KR 7.5 WYO822 CM KR 1.6 WYO103 CM KR WYO123 CM KR * Standard lead configuration, other lead spacing and diameter available on request. ORDERING CODE 7th digit Capacitance Tolerance 10th to 12th digit Lead Configuration (see General Information) R 14th digit RoHS Compliant Component ± 20 % = M APPROVALS IEC 60384 - 14 / 2nd Issue (1993) incl. Am. 1 (1995) - Safety Tests EN 132 400 (1994) - Safety Tests That approval together with the CB Test Certificate substitutes the national approval of the following nations: Belgium France Italy Austria China Japan Spain Denmark Greece Luxembourg Portugal Singapore Poland United Kingdom Germany Ireland Netherlands Sweden Slovenia Hungaria Czech Republic Finland Iceland Norway Switzerland Korea Israel 1 nF ... 12 nF 1 nF ... 12 nF 250 Vac 440 Vac 1 nF ... 12 nF 250 Vac 1 nF ... 12 nF 250 Vac Y2 - Capacitor: CB-Test Certificate: DE-1-11476-A1 X1 - Capacitor: CB-Test Certificate: DE-1-11148-A1 Minimum thickness of insulation: 0.4 mm Underwriters Laboratories Inc. UL 1414 Line-by-pass component Agency Files / Licences E 183 844 V1 S2 Canadian Standards Association CSA C22.2 No 1-98 Line-by-pass component Agency Files / Licences E 183 844 V1 S2 ORDERING INFORMATION WYO SERIES 103 CAP. VALUE Document Number: 22202 Revision: 31-Jan-06 M CM CF0 K R TOLERANCE RATED VOLTAGE LEAD CONFIGURATION INTERNAL CODE RoHS COMPLIANT For technical questions contact: [email protected] www.vishay.com 45 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1