MBR1035CT - MBR10200CT CREAT BY ART 10.0 AMPS. Schottky Barrier Rectifiers TO-220AB Pb RoHS COMPLIANCE Features Plastic material used carriers Underwriters Laboratory Classification 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guard-ring for overvoltage protection High temperature soldering guaranteed: 260℃/10 seconds, 0.25"(6.35mm) from case Green compound with suffix "G" on packing code & prefix "G" on datecode Mechanical Data Dimensions in inches and (millimeters) Marking Diagram Cases: JEDEC TO-220AB molded plastic body Terminals: Pure tin plated, lead free, solderable per MIL-STD-750, Method 2026 MBR10XXCT G = Green Compound Polarity: As marked Y = Year Mounting position:Any WW = Work Week Mounting torque: 5 in. - lbs, max Weight: 1.88 grams = Specific Device Code Maximum Ratings and Electrical Characteristics Rating at 25 ℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage MBR Symbol 1035 CT VRRM 35 VRMS 24 MBR 1045 CT 45 MBR 1050 CT 50 MBR 1060 CT 60 MBR 1090 CT 90 MBR MBR MBR 10100 10150 10200 CT CT CT 100 150 200 31 35 42 63 70 105 140 V 45 50 60 90 100 150 200 V Units V Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current IF(AV) 10 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) IFRM 10 A Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method) IFSM 120 A Peak Repetitive Reverse Surge Current (Note 1) IRRM Maximum Instantaneous Forward Voltage at (Note 2) IF=5A, TA=25℃ IF=5A, TA=125℃ IF=10A, T A=25℃ IF=10A, T A=125℃ Maximum Instantaneous Reverse Current @ T A=25 ℃ at Rated DC Blocking Voltage @ T A=125 ℃ Voltage Rate of Change (Rated V R) Maximum Typical Thermal Resistance Operating Junction Temperature Range Storage Temperature Range VF IR 35 1.0 0.5 A 0.70 0.80 0.85 0.88 0.57 0.65 0.75 0.78 0.80 0.90 0.95 0.98 0.67 0.75 0.85 0.88 2 5 0.1 15 10 V mA mA dV/dt RθJC 10,000 TJ - 65 to + 150 O TSTG - 65 to + 175 O V/us O 1.5 C/W C C Note 1: 2.0uS Pulse Width, f=1.0KHz Note 2: Pulse Test : 300uS Pulse Width, 1% Duty Cycle Version:H11 RATINGS AND CHARACTERISTIC CURVES (MBR1035CT THRU MBR10200CT) FIG.1- FORWARD CURRENT DERATING CURVE FIG. 2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 180 PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD A CURRENT (A) 6 5 4 3 2 RESISTIVE OR INDUCTIVELOAD 1 8.3ms Single Half Sine Wave JEDEC Method 150 120 90 60 30 0 0 0 50 100 150 0 1 10 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE (oC) 100 FIG. 4- TYPICAL REVERSE CHARACTERISTICS FIG. 3- TYPICAL FORWARD CHARACTERISRICS 100 TA=25oC Pulse Width=300us 1% Duty Cycle 100 MBR1050CT-1060CT 10 MBR1035CT-1045CT MBR1090CT-10100CT 1 MBR10150-10200CT INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT (A) 1000 10 TA=125℃ 1 TA=75℃ 0.1 0.01 TA=25℃ 0.001 0.1 0.2 0.4 0.6 0.8 1 FORWARD VOLTAGE (V) 1.2 0 1.4 40 60 80 100 120 140 FIG. 6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS PER LEG FIG. 5- TYPICAL JUNCTION CAPACITANCE 10000 100 TA=25℃ f=1.0MHz Vsig=50mVp-p TRANSIENT THERMAL IMPEDANCE (℃/W) JUNCTION CAPACITANCE (pF) A 20 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 1000 1 0.1 100 0.1 1 10 REVERSE VOLTAGE (V) 100 0.01 0.1 1 10 100 T-PULSE DURATION. (sec) Version:H11