Omron G6H-2 Ultra-compact, ultra-sensitive dpdt relay Datasheet

DISCONTINUED
Low Signal Relay
G6H
Ultra-compact, Ultra-sensitive DPDT Relay
• Compact size and low 5 mm profile.
• Low thermoelectromotive force.
• Low magnetic interference enables high-density mounting.
• Utilizes Omron’s moving-loop design.
• Highly stable magnetic circuit for latching endurance and
excellent resistance to vibration and shock.
• High sensitivity with low nominal power consumption.
• Single or dual coil latching types available.
• RoHS Compliant
RC
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G6H-2-DC6).
■ Non-latching
Terminal Type
Through-hole
Contact form
DPDT
Model
G6H-2
Surface mount
G6H-2F
■ Latching
Terminal Type
Contact form
Model
Single coil latching
Through-hole
DPDT
G6HU-2
Dual coil latching
G6HK-2
Specifications
■ Contact Data
Load
Resistive load (p.f. = 1)
Rated load
0.50 A at 125 VAC, 1 A at 30 VDC
Contact material
Ag (Au clad)
Carry current
1A
Max. operating voltage
125 VAC, 110 VDC
Max. operating current
1A
Max. switching capacity
62.50 VA, 33 W
Min. permissible load (See note)
10 μA, 10 mVDC
Note: P level: λ60 = 0.1 x 10–6/operation
This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary
depending on the operating environment. Always double-check relay suitability under actual operating conditions.
Low Signal Relay
G6H
49
DISCONTINUED
■ Coil Data
Non-latching Type (G6H-2, G6H-2F)
Rated voltage
(VDC)
Rated current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Armature
OFF
Pick-up
voltage
Armature
ON
3
46.70
64.30
0.025
0.022
5
28.10
178
0.065
0.058
6
23.30
257
0.11
0.09
9
15.50
579
0.24
0.20
12
11.70
1,028
0.43
0.37
24
8.30
2,880
1.20
48
5.8
8,228
—
Dropout
voltage
Maximum
voltage
% of rated voltage
75% max.
10% min.
Power
consumption
(mW)
200% max. at
23°C
Approx. 140
1.0
170% max. at
23°C
Approx. 200
—
140% max. at
23°C
Approx. 300
Single Coil Latching Type (G6HU-2)
Rated voltage
(VDC)
Rated current
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Armature
OFF
Set pick-up
voltage
Armature
ON
3
33.30
90
0.034
0.029
5
20
250
0.11
0.09
6
16.70
360
0.14
0.12
9
11.10
810
0.33
0.28
12
8.30
1,440
0.60
0.50
24
6.25
3,840
1.6
1.3
Reset pick-up
voltage
Maximum
voltage
% of rated voltage
75% max.
75% max.
180% max. at
23°C
Power
consumption
(mW)
Approx. 100
Approx. 150
Dual Coil Latching Type (G6HK-2)
Rated voltage Rated current
(VDC)
(mA)
Coil
resistance
(Ω)
Coil inductance
(ref. value) (H)
Armature
OFF
Armature
ON
3
66.70
45
0.014
0.0075
5
40
125
0.042
0.023
6
33.30
180
0.065
0.035
9
22.20
405
0.16
0.086
12
16.70
720
0.3
0.16
24
12.50
1,920
0.63
0.33
Note: 1.
2.
3.
4.
50
Set pick-up
voltage
Reset pick-up
voltage
Maximum
voltage
% of rated voltage
75% max.
75% max.
Power
consumption
(mW)
160% max. at
23°C
Approx. 200
130% max. at
23°C
Approx. 300
The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
Operating characteristics are measured at a coil temperature of 23°C with a tolerance of ±10%.
The maximum voltage is the highest voltage that can be imposed on the relay coil.
The maximum voltage that can be be applied when using the G6H-2F (at 85°C) is 115% (3 to 12 V) or 105% (24 V) of the rated voltage.
Low Signal Relay
G6H
DISCONTINUED
■ Characteristics
Contact resistance (See note 1)
50 mΩ max. (through-hole); 60 mΩ max. (surface mount)
Operate (set) time (See note 2)
Non-latching: 3 ms max. (approx. 2.0 ms)
Latching: 3ms max. (approx. 1.5 ms)
Release (reset) time (See note 2)
Non-latching: 2 ms max. (approx. 1.0 ms)
Latching: 3ms max. (approx. 1.5 ms)
Min. set/reset signal width
5ms min. (at 23°C)
Operating frequency
(max.)
Mechanical
36,000 operations/hour
Electrical
1,800 operations/hour (under rated load)
Insulation resistance (See note 3)
1,000 MΩ max. (at 500 VDC)
Dielectric strength
1,000 VAC, 50/60 Hz for 1 minute between coil and contacts
1,000 VAC, 50/60 Hz for 1 minute between contacts of different poles
750 VAC, 50/60 Hz for 1 minute between contacts of same pole
125 VAC, 50/60 Hz for 1 minute between set and reset coils (G6HK-2)
1,500 V (10 x 160 μs) between contacts of same polarity (conforms to FCC Part 68)
Surge withstand voltage
Vibration
Mechanical durability 10 to 55 Hz; 5 mm double amplitude
Shock
Mechanical durability 1,000 m/s2 (approx. 100 G)
Malfunction durability 10 to 55 Hz; 3 mm double amplitude
Malfunction durability 500 m/s2 (approx. 50 G)
Ambient temperature
-40° to 70°C with no icing
Humidity
5% to 85% RH
Service life
Mechanical
100 million operations min. (at 36,000 operations/hr)
Electrical
200,000 operations min. (at 1,800 operations/hr) See “Characteristic Data”
Weight
Approx. 1.5 g
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
2. Values in parentheses are typical values unless otherwise stated.
3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those for checking the dielectric strength.
(The insulation resistance between the set and reset coil (G6HK-2), however, is 100MΩ min. when measured with a 125-VDC megohmmeter).
4. The above values are initial values.
■ Approvals
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Type
G6H-2(F)
G6HU-2
G6HK-2
Contact form
DPDT
Coil rating
1.50 to 48 VDC
Contact ratings
2 A, 30 VDC
0.30 A, 110 VDC
0.50 A, 125 VAC
Note: 1. The rated values approved by each of the safety standards (e.g., UL, CSA, TUV) may be different from the performance characteristics
individually defined in this catalog.
2. In the interest of product improvement, specifications are subject to change.
Low Signal Relay
G6H
51
DISCONTINUED
■ Characteristic Data
Electrical Service Life
Service life (x10 3 operations)
Rated operating current (A)
Maximum Switching Capacity
AC resistive load
DC resistive load
10,000
7,000
5,000
3,000
30-VDC resistive load
1,000
700
500
300
125-VAC resistive load
100
Rated operating voltage (V)
Rated operating current (A)
Ambient Temperature vs. Maximum Coil Voltage
Maximum coil voltage (%)
Maximum coil voltage (%)
24 VDC
3 to 24 VDC
48 VDC
Ambient temperature (°C)
3 to 24 VDC
Ambient temperature (°C)
Dual Coil Latching
(G6HK-2)
Maximum coil voltage (%)
Single Coil Latching
(G6HU-2)
Non-latching
(G6H-2)
3 to 12 VDC
24 VDC
Ambient temperature (°C)
Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage.
Malfunctioning Shock Resistance
(G6H-2)
5 VDC
Number of Units: 10
NC contact
Shock direction
52
NO contact
Low Signal Relay
G6H
Condition: The Units were shocked at the rate of 500 m/s 2
three times each in the ±X, ±Y, and ±Z directions
with and without voltage imposed on the Units until
the Units malfunctioned.
DISCONTINUED
High-frequency Characteristics (See notes 1 and 2.)
Frequency vs. Isolation
Frequency vs. Insertion Loss
50
100
0
Unit: G6H-2
Number of Units: 5
1.0
2.0
20
50
100 200
500 1,000
Frequency (MHz)
Distribution of Operate and
Release Time (See note 1.)
Number of contact
Unit: G6H-2 at 5 VDC
Number of Units: 50
Time (ms)
Operate
time
Release
time
0
20
50
100 200
(Average value)
500 1,000
Frequency (MHz)
0
V.SWR
0
Return loss (dB)
Insertion loss (dB)
Unit:
Unit:G6H-2
G6H-2
Number of Units: 5
Unit: G6H-2
Number of Units: 5
Return loss
10
10
V.SWR
5
200
1
500 1,000
20
0
20
50
100
Frequency (MHz)
Distribution of Bounce Time
(See note 1.)
Unit: G6H-2 at 5 VDC
Number of Units: 50
Number of contact
Isolation (dB)
0
Frequency vs. Return Loss, V.SWR
(Average value)
(Average value)
Operate bounce
time
Release
bounce time
Time (ms)
Note: 1. The ambient temperature is 23°C.
2. High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics, including
endurance, in the actual machine before use.
Low Signal Relay
G6H
53
DISCONTINUED
Dimensions
Note: 1. All units are in millimeters unless otherwise indicated.
2. Orientation marks are indicated as follows:
■ Non-latching
Terminal Arrangement/
Internal Connections
G6H-2
Mounting Holes
Tolerance: ±0.1
9.3 max.
(9.0)*
14.3 max.
(14.1)*
(Bottom View)
(Bottom View)
0.25
5.4 max.
(5.0)*
3.5+0.3
1 2 3 4
5
2.54 2.54 (1.92)
(1.92)
(0.69)
+
7.62
7.62
-
0.25
0.5
2.54
10 9 8
7 6
(0.69)
* Average value
Ten, 1-dia. holes
G6H-2F
6.6 max.
(6.3)*
2.54
(Top View)
(Top View)
9.3 max.
(9.0)*
14.3 max.
(14.1)*
2.54
Glue pad
5.5 max.
(5.2)
* Average value
■ Latching
G6HU-2
14.3 max.
(14.1)*
5.4 max.
(5.0)*
(Bottom View)
9.3 max.
(9.0)*
2.54 2.54 (1.92)
(Bottom View)
(1.92)
1 2 3 4
0.25
(0.69)
5
+ S R
- +
3.5
2.54
0.25
0.5
7.62
(0.69)
10 9 8 7 6
7.62
Ten, 1-dia. holes 2.54
2.54
* Average value
(Bottom View)
G6HK-2
14.3 max.
(14.1)*
5.4 max.
(5.0)*
(Bottom View)
9.3 max.
(9.0)*
0.25
3.5
2.54
0.5
* Average value
54
Low Signal Relay
G6H
0.25
7.62
2.54 2.54 (1.92)
(1.92)
1 2S 3 4
5
+
-
+
-
(0.69)
7.62
(0.69)
10 9 8 7 6
R
Ten, 1-dia. holes 2.54
2.54
DISCONTINUED
Hints on correct use
Example of Recommended Soldering Conditions for the G6H-2F
(Surface Mount Relays)
(2) IRS Method (Mounting Solder: Lead-free)
Temperature (°C)
Temperature (°C)
(1) IRS Method (Mounting Solder: Lead)
Soldering
220 to
240
180 to
200
Case top surface
(peak): 255˚C max.
Soldering
250 max.
230
180
Preheating
150
150
Preheating
Relay
terminal
section
90 to 120
120 max.
30 max.
Time (s)
20 to 30
Time (s)
Note: The temperature profile indicates the temperature on the PCB.
Note: The temperature profile indicates the temperature on the relay
terminal.
Approved Standards
The approved rated values for international standards differ from the performance characteristics of the individual models.
Be sure to confirm that required standards are satisfied before actual use.
UL Recognized (File No. E41515) - -Ambient Temp. = 40°C
No. of
poles
Model
G6H-2(F) 2
Coil rating
1.5 to
48 VDC
Contact
rating
CSA Certified (File NO. LR31928)
No. of
operations
2 A, 30 VDC 6,000
No. of
poles
Model
G6H-2(F) 2
0.3 A,
110 VDC
Contact
rating
Coil rating
1.5 to
48 VDC
No. of
operations
2 A, 30 VDC 6,000
0.3 A,
110 VDC
0.5 A,
125 VAC
0.5 A,
125 VAC
Tape Packing (Surface Mounting Terminal Models)
When ordering Relays in tape packing, add the prefix “-TR” to the model number otherwise the Relays in stick packing will be provided.
Relays per Reel: 500
Direction of Relay Insertion
Carrier Tape Dimensions
G6H-2F
Top tape (cover tape)
4±0.1
Orientation mark
Embos
tape
1.75±0.1
11.5±0.1
24±0.3
16±0.1
1.55±0.05 dia.
Reel Dimensions
2±0.5
0.38±0.05
0.3
Pulling
direction
Carrier tape
2±0.1 1.55±0.05 dia.
14.5±0.1
6.9±0.1
24.4
21±0.8 dia.
(100) 330
R1.0
13±0.5 dia.
Low Signal Relay
G6H
55
DISCONTINUED
Precautions
Long-term Continuously ON Contacts
Relay Handling
Using the Relay in a circuit where the Relay will be ON continuously
for long periods (without switching) can lead to unstable contacts
because the heat generated by the coil itself will affect the insulation,
causing a film to develop on the contact surfaces. We recommend
using a latching relay (magnetic-holding relay) in this kind of circuit. If
a single-side stable model must be used in this kind of circuit, we recommend using a fail-safe circuit design that provides protection
against contact failure or coil burnout.
Use the Relay as soon as possible after opening the moisture-proof
package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may deteriorate and seal failure
may occur after the solder mounting process. To store the Relay after
opening the moisture-proof package, place it into the original package and seal the package with adhesive tape.
Claw Securing Force During Automatic Mounting
During automatic insertion of Relays, be sure to set the securing
force of each claw to the following so that the Relay’s characteristics
will be maintained.
C
A
B
Direction A: 1.96 N max.
Direction B: 4.90 N max.
Direction C: 1.96 N max.
56
Low Signal Relay
G6H
When washing the product after soldering the Relay to a PCB, use a
water-based solvent or alcohol-based solvent, and keep the solvent
temperature to less than 40°C. Do not put the Relay in a cold cleaning bath immediately after soldering.
DISCONTINUED
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Low Signal Relay
G6H
DISCONTINUED
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X301-E-1a
Low Signal Relay
06/09
G6H
Specifications subject to change without notice
Printed in USA
Similar pages