MURD620CT Preferred Device SWITCHMODE Power Rectifier DPAK Surface Mount Package http://onsemi.com These state−of−the−art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. ULTRAFAST RECTIFIER 6.0 AMPERES, 200 VOLTS Features • • • • Pb−Free Packages are Available Ultrafast 35 Nanosecond Recovery Time Low Forward Voltage Drop Low Leakage 1 4 Mechanical Characteristics: • Case: Epoxy, Molded • Weight: 0.4 Gram (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal 3 Leads are Readily Solderable MARKING DIAGRAM • Lead and Mounting Surface Temperature for Soldering Purposes: • • 260°C Max. for 10 Seconds Shipped 75 Units Per Plastic Tube Available in 16 mm Tape and Reel, 2500 Units Per Reel, by Adding a “T4’’ Suffix to the Part Number 4 YWW U 620T DPAK CASE 369C 1 2 3 MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 200 V Average Rectified Forward Current (Rated VR, TC = 140°C) Per Diode Per Device IF(AV) Peak Repetitive Forward Current (Rated VR, Square Wave, Per Diode 20 kHz, TC = 145°C) IF 6.0 IFSM 50 Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) Operating Junction and Storage Temperature Range ORDERING INFORMATION August, 2004 − Rev. 5 Package Shipping† DPAK 75 Units/Rail MURD620CTG DPAK (Pb−Free) 75 Units/Rail MURD620CTT4 DPAK 2500/Tape & Reel DPAK (Pb−Free) 2500/Tape & Reel Device 3.0 6.0 MURD620CT A A MURD620CTT4G TJ, Tstg = Year = Work Week A −65 to +175 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. Semiconductor Components Industries, LLC, 2004 Y WW 1 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MURD620CT/D MURD620CT THERMAL CHARACTERISTICS (Per Diode) Rating Symbol Value Unit Thermal Resistance − Junction−to−Case RJC 9 °C/W Thermal Resistance − Junction−to−Ambient (Note 1) RJA 80 °C/W ELECTRICAL CHARACTERISTICS (Per Diode) Maximum Instantaneous Forward Voltage Drop (Note 2) (iF = 3 Amps, TC = 25°C) (iF = 3 Amps, TC = 125°C) (iF = 6 Amps, TC = 25°C) (iF = 6 Amps, TC = 125°C) vF Maximum Instantaneous Reverse Current (Note 2) (TJ = 25°C, Rated dc Voltage) (TJ = 125°C, Rated dc Voltage) iR Maximum Reverse Recovery Time (IF = 1 Amp, di/dt = 50 Amps/s, VR = 30 V, TJ = 25°C) (IF = 0.5 Amp, iR = 1 Amp, IREC = 0.25 A, VR = 30 V, TJ = 25°C) trr V 1 0.96 1.2 1.13 A 5 250 ns 35 25 1. Rating applies when surface mounted on the minimum pad sizes recommended. 2. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. 100 100 50 30 20 10 10 150°C 1.0 100°C 0.1 25°C 0.01 0.001 7.0 0 20 40 5.0 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Leakage Current* (Per Leg) 3.0 175°C * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these curves if VR is sufficiently below rated VR. TJ = 25°C 2.0 150°C 100°C PF(AV) , AVERAGE POWER DISSIPATION (WATTS) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F TJ = 175°C IR, REVERSE CURRENT (A) 70 1.0 0.7 0.5 0.3 0.2 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) 14 13 12 11 10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 5.0 10 SINE WAVE IPK/IAV = 20 dc SQUARE WAVE TJ = 175°C 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 1. Typical Forward Voltage (Per Leg) Figure 3. Average Power Dissipation (Per Leg) http://onsemi.com 2 IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 8.0 RATED VOLTAGE APPLIED RJC = 9°C/W 7.0 6.0 TJ = 175°C 5.0 dc 4.0 SINE WAVE OR SQUARE WAVE 3.0 2.0 1.0 0 100 110 120 130 140 150 160 170 4.0 RATED VOLTAGE APPLIED RJA = 80°C/W 3.5 3.0 SURFACE MOUNTED ON MIN. PAD SIZE RECOMMENDED 2.5 2.0 dc TJ = 175°C 1.5 SINE WAVE OR SQUARE WAVE 1.0 0.5 180 0 0 20 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (°C) TA, AMBIENT TEMPERATURE (°C) Figure 4. Current Derating, Case (Per Leg) Figure 5. Current Derating, Ambient (Per Leg) 100 70 50 C, CAPACITANCE (pF) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) MURD620CT 30 20 TJ = 25°C 10 7.0 5.0 3.0 2.0 1.0 0 10 20 30 40 50 60 70 80 90 VR, REVERSE VOLTAGE (VOLTS) Figure 6. Typical Capacitance (Per Leg) http://onsemi.com 3 100 MURD620CT PACKAGE DIMENSIONS DPAK CASE 369C ISSUE O −T− C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. SEATING PLANE E R 4 Z A S 1 2 DIM A B C D E F G H J K L R S U V Z 3 U K F J L H D G 2 PL 0.13 (0.005) M INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.180 0.215 0.025 0.040 0.020 −−− 0.035 0.050 0.155 −−− MILLIMETERS MIN MAX 5.97 6.22 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.57 5.45 0.63 1.01 0.51 −−− 0.89 1.27 3.93 −−− T SOLDERING FOOTPRINT* 6.20 0.244 3.0 0.118 2.58 0.101 5.80 0.228 1.6 0.063 6.172 0.243 SCALE 3:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. MURD620CT/D