ON CM1223-02SR Capacitance esd protection arrays with backdrive protection Datasheet

CM1223
Industry First Low
Capacitance ESD Protection
Arrays with Backdrive
Protection
Product Description
The CM1223 family of diode arrays has been designed to provide
ESD protection for electronic components or subsystems requiring
minimal capacitive loading. These devices are ideal for protecting
systems with high data and clock rates or for circuits requiring low
capacitive loading. Each ESD channel consists of a pair of diodes in
series, which steer the positive or negative ESD current pulse to either
the positive (VP) or negative (VN) supply rail. A Zener diode is
embedded between VP and VN, to absorb positive ESD strikes and
provide ESD protection for the VP rail. An additional diode is
integrated to serve as backdrive current protection. The CM1223
protects against ESD pulses up to ±8 kV per the IEC 61000−4−2
standard. In addition, all pins are protected from contact discharges of
greater than ±15 kV as outlined by the MIL−STD−883D (Method
3015) specification for Human Body Model (HBM) ESD.
These devices are particularly well−suited for protecting systems
using high−speed ports such as USB2.0, IEEE1394 (Firewire®,
iLink™), serial ATA, DVI, HDMI and corresponding ports in
removable storage, digital camcorders, DVD−RW drives, as well as
other applications where extremely low loading capacitance with ESD
protection are required in a small package footprint.
http://onsemi.com
SOT23−5
SO SUFFIX
CASE 527AH
SOT−143
SR SUFFIX
CASE 318A
(see page 2)
MARKING DIAGRAM
XXX MG
G
Backdrive Protection on all Lines
• Provides ESD Protection to IEC61000−4−2 Level 4:
•
•
•
•
•
±8 kV Contact Discharge & ±15 kV Air Discharge
Low Channel Input Capacitance of 1.0 pF (typical)
Minimal Capacitance Change with Temperature and Voltage
Channel I/O to GND Capacitance Difference of 0.02 pF Typical is
Ideal for Differential Signals
Mutual Capacitance between Signal Pin and Adjacent Signal Pin at
0.11 pF (typical)
Zener Diode Protects Supply Rail and Eliminates the Need for
External Bypass Capacitors
Pin Compatible with CM1213−02, −04, and −08
Each I/O Pin Can Withstand over 1000 ESD Strikes
Available in SOT, and MSOP Packages
These Devices are Pb−Free and are RoHS Compliant
Applications
• USB 2.0 Ports at 480 Mbps in Desktop PCs, Notebooks
•
•
•
•
and Peripherals
• IEEE1394 Firewire® Ports at 400 Mbps / 800 Mbps
• DVI Ports, HDMI Ports in Notebooks, Set Top Boxes,
Digital TVs, LCD Displays
© Semiconductor Components Industries, LLC, 2012
July, 2012 − Rev. 6
XXX MG
G
XXX MG
G
1
• Two, Four, and Eight Channels of ESD Protection with Integrated
•
MSOP 10
MR SUFFIX
CASE 846AE
BLOCK DIAGRAM
Features
•
•
•
SOT23−6
SO SUFFIX
CASE 527AJ
1
SOT143−4
SOT23−6
MSOP−10
XXX
= Specific Device Code
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
CM1223−02SO
SOT23−5
(Pb−Free)
3000/Tape & Reel
CM1223−02SR
SOT143−4
(Pb−Free)
3000/Tape & Reel
CM1223−04SO
SOT23−6
(Pb−Free)
MSOP−10
(Pb−Free)
MSOP−10
(Pb−Free)
3000/Tape & Reel
CM1223−04MR
CM1223−08MR
Shipping
4000/Tape & Reel
4000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
UDI and Display Ports
Serial ATA Ports in Desktop PCs and Hard Disk Drives
PCI Express Ports
General Purpose High−speed Data Line ESD Protection
Publication Order Number:
CM1223/D
CM1223
BLOCK DIAGRAM
VP
CH1
CH4
VP
CH3
CH1
VN
CH2
CH8
CH7
CH6 CH5
VP
CH2
VN
CM1223−02SO
CM1223−02SR
CH1 CH2
CM1223−04SO
CM1223−04MR
VN
CH3
CM1223−08MR
http://onsemi.com
2
CH4
CM1223
Table 1. PIN DESCRIPTIONS
2−Channel, 4−Lead SOT143−4 Package
2−Channel, 5−Lead SOT23−5 Package
Pin
Name
Type
No Connect
1
VN
GND
Negative voltage supply rail
2
CH1
I/O
ESD Channel
I/O
ESD Channel
3
CH2
I/O
ESD Channel
CH2
I/O
ESD Channel
4
VP
PWR
VP
PWR
Pin
Name
Type
1
NC
2
VN
GND
3
CH1
4
5
Description
Name
Type
1
CH1
I/O
Negative voltage supply rail
Positive voltage supply rail
Positive voltage supply rail
PACKAGE / PINOUT DIAGRAMS
4−Channel, 6−Lead SOT23−6 Package
Pin
Description
Description
Top View
ESD Channel
VN
GND
CH2
I/O
ESD Channel
4
CH3
I/O
ESD Channel
5
VP
PWR
6
CH4
I/O
1
CH1
2
Negative voltage supply rail
4
VP
3
CH2
D337
2
3
VN
4−Lead SOT143−4
Positive voltage supply rail
ESD Channel
Top View
Pin
Name
Type
1
CH1
I/O
2
NC
Description
ESD Channel
NC
1
VN
2
CH1
3
No Connect
VP
PWR
4
CH2
I/O
5
NC
6
CH3
7
NC
8
VN
GND
9
CH4
I/O
10
NC
4
CH2
Positive voltage supply rail
ESD Channel
Top View
No Connect
I/O
VP
5−Lead SOT23−5
ESD Channel
No Connect
Negative voltage supply rail
CH1
1
VN
2
CH2
3
D335
3
5
D334
4−Channel, 10−Lead MSOP−10 Package
6
CH4
5
VP
4
CH3
6−Lead SOT23−6
ESD Channel
No Connect
Top View
8−Channel, 10−Lead MSOP−10 Package
Type
1
CH1
I/O
2
CH2
I/O
ESD Channel
3
CH3
I/O
ESD Channel
4
CH4
I/O
ESD Channel
5
VN
GND
6
CH5
I/O
ESD Channel
7
CH6
I/O
ESD Channel
8
VP
PWR
9
CH7
I/O
ESD Channel
10
CH8
I/O
ESD Channel
CH1
NC
VP
CH2
NC
Description
ESD Channel
1
2
3
4
5
10
9
8
7
6
NC
CH4
VN
NC
CH3
10−Lead MSOP−10
Negative voltage supply rail
Top View
CH1
CH2
CH3
CH4
VN
Positive voltage supply rail
1
2
3
4
5
D336
Name
D338
Pin
10
9
8
7
6
CH8
CH7
VP
CH6
CH5
10−Lead MSOP−10
http://onsemi.com
3
CM1223
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
6.0
V
Operating Temperature Range
–40 to +85
°C
Storage Temperature Range
–65 to +150
°C
(VN − 0.5) to (VP + 0.5)
V
Operating Supply Voltage (VP − VN)
DC Voltage at any channel input
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Operating Temperature Range
Package Power Rating
SOT143−4 Package (CM1223−02SR)
SOT23−5 Package (CM1223−02SO)
SOT23−6 Package (CM1223−04SO)
MSOP−10 Package (CM1223−04MR)
MSOP−10 Package (CM1223−08MR)
Rating
Units
–40 to +85
°C
mW
225
225
225
400
400
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note1)
Symbol
Parameter
Conditions
Min
Typ
Max
Units
3.3
5.5
V
8.0
mA
VP
Operating Supply Voltage (VP−VN)
IP
Operating Supply Current
(VP−VN) = 3.3 V
VSCL
Signal Clamp Voltage
Positive Transients
Negative Transients
IF = 8 mA; TA = 25°C
ILEAK
Channel Leakage Current
TA = 25°C; VP = 5 V, VN = 0 V
±0.1
±1.0
mA
Channel Input Capacitance
At 1 MHz, VP = 3.3 V, VN = 0 V, VIN = 1.65 V
1.0
1.5
pF
Channel Input Capacitance Matching
At 1 MHz, VP = 3.3 V, VN = 0 V, VIN = 1.65 V
0.02
pF
CMUTUAL
Mutual Capacitance between signal pin
and adjacent signal pin
At 1 MHz, VP = 3.3 V, VN = 0 V, VIN = 1.65 V
0.11
pF
VESD
ESD Protection − Peak Discharge
Voltage at any channel input, in system
a) Contact discharge per
IEC 61000−4−2 standard
b) Human Body Model,
MIL−STD−883, Method 3015
CIN
DCIN
1.
2.
3.
4.
6.7
0.60
V
8.2
0.80
kV
TA = 25°C; (Notes 3 and 4)
±8
TA = 25°C; (Notes 2 and 4)
±15
VCL
Channel Clamp Voltage
Positive Transients
Negative Transients
TA = 25°C, IPP = 1A, tP = 8/20 mS
(Note 4)
RDYN
Dynamic Resistance
Positive Transients
Negative Transients
TA = 25°C, IPP = 1A, tP = 8/20 mS
Any I/O pin to Ground
(Note 4)
+8.8
–1.4
0.7
0.4
All parameters specified at TA = –40°C to +85°C unless otherwise noted.
Human Body Model per MIL−STD−883, Method 3015, CDischarge = 100 pF, RDischarge = 1.5 kW, VP = 3.3 V, VN grounded.
Standard IEC 61000−4−2 with CDischarge = 150 pF, RDischarge = 330 W, VP = 3.3 V, VN grounded.
These measurements performed with no external capacitor on VP (VP floating).
http://onsemi.com
4
V
W
CM1223
PERFORMANCE INFORMATION
Input Channel Capacitance Performance Curves
http://onsemi.com
5
CM1223
PERFORMANCE INFORMATION (Cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 50 Ohm Environment)
Figure 1. Insertion Loss (S21) vs. Frequency (0 V DC Bias, VP=3.3 V, MSOP−10 Package)
Figure 2. Insertion Loss (S21) vs. Frequency (2.5 V DC Bias, VP=3.3 V, MSOP−10 Package)
http://onsemi.com
6
CM1223
BACKDRIVE PROTECTION
Backdrive protection is needed to block against backdrive current flowing from a high potential voltage node toward a lower
potential voltage node through the interface cable.
For example, consider a DVD player connected to a TV via an HDMI interface. If the DVD player is switched off and the
TV is left on, there is a possibility of reverse current flow back into the main power supply rail of the DVD player. Typically,
the DVD’s power supply has some form of associated bulk supply capacitance, and it is possible over time to charge that bulk
supply capacitance to some intermediate level.
If that level rises above the power−on−reset (POR) voltage level of some of the integrated circuits, the DVD player may not
reset properly when the DVD player is turned back on. This is largely because all CMOS logic exhibits a very high impedance
on the power rail node even when ”off”.
To avoid this situation, the CM1223 with integrated backdrive protection diode was designed to block backdrive current,
guaranteeing no more than 5 mA on any I/O pin when the I/O pin voltage is greater than the CM1223 supply voltage.
APPLICATION INFORMATION
Design Considerations
To realize the maximum protection against ESD pulses, care must be taken in the PCB layout to minimize parasitic series
inductances on the Supply/Ground rails as well as the signal trace segments between the signal input (typically a connector)
and the ESD protection device. Application of Positive ESD Pulse between Input Channel and Ground illustrates an example
of a positive 8 kV ESD pulse striking an input channel. The 8 kV ESD current pulse will divert along the path as indicated in
Application of Positive ESD Pulse between Input Channel and Ground, through the D1 diode and the Zener diode back to the
ground rail.
An ESD current pulse can rise from zero to its peak value in a very short time. For example, a level 4 contact discharge per
the IEC61000−4−2 standard results in a current pulse that rises from zero to 30 Amps in 1ns. The CM1223 has a fast response
time of less than 1ns and low clamp voltage to handle this pulse scenario.
Similarly for negative ESD pulses, parasitic series inductance from the VN pin to the ground rail will lead to drastically
increased negative voltage on the line being protected.
The CM1223 also has an integrated backdrive diode between VP and VN to prevent backdrive current flow from the powered
sources.
As a general rule, the ESD Protection Array should be located as close as possible to the point of entry of expected
electrostatic discharges.
http://onsemi.com
7
CM1223
ADDITIONAL INFORMATION
See also ON Semiconductor Application Note “Design Considerations for ESD Protection”, in the Applications section.
VP
Positive Supply
VCC
One Channel of
CM1223
30A
0A
8 kV ESD Pulse
PATH OF POSI
TIVE ESD
CURRENT
PULSE IESD
Line Being Protected
SYSTEM
OR CIR
CUITRY
I/O pin
PATH OF NEGA
TIVE ESD
VN
Ground Rail
Chassis Ground
Figure 3. Application of Positive ESD Pulse between Input Channel and Ground
Figure 4. Application of Positive ESD Pulse between Input Channel and Ground
http://onsemi.com
8
CM1223
MECHANICAL DETAILS
The CM1223 is available in SOT143−4, SOT23−5, SOT23−6, and MSOP−10 packages with a lead−free finishing. The various
package drawings are presented below.
SOT143 Mechanical Specifications
The CM1223−02SR is supplied in 4−pin SOT143 package, the CM1223−02SO in a 5−pin SOT23 package, the CM1223−04SO
in a 6−pin SOT23 package, and the CM1223−08MR in a 10−lead MSOP package. Dimensions are presented below.
Table 5. TAPE AND REEL SPECIFICATIONS
Part Number
Chip Size (mm)
Pocket Size (mm)
B0 X A0 X K0
Tape Width
W
Reel
Diameter
Qty per
Reel
P0
P1
CM1223−02SR
2.92 X 2.37 X 1.01
2.60 X 3.15 X1.20
8 mm
178 mm (7″)
3000
4 mm
4 mm
CM1223−02SO
2.90 X 2.80 X 1.45
3.20 X 3.20 X1.40
8 mm
178 mm (7″)
3000
4 mm
4 mm
CM1223−04SO
2.90 X 2.80 X 1.45
3.20 X 3.20 X1.40
8 mm
178 mm (7″)
3000
4 mm
4 mm
CM1223−08MR
3.00 X 3.00 X 0.85
3.30 X 5.30 X1.30
12 mm
330 mm (13″)
4000
4 mm
8 mm
10 Pitches Cumulative
P0
Top
Î
Î
Î
Î
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
Tolerance On Tape
±0.2 mm
Cover
Tape
K0
For Tape Feeder Reference
Only Including Draft
Concentric Around B
A0
W
B0
Embossment
P1
User Direction of Feed
http://onsemi.com
9
Center Lines
of Cavity
CM1223
PACKAGE DIMENSIONS
SOT−143
CASE 318A−06
ISSUE U
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIM­
UM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE
MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PRO­
TRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS,
AND GATE BURRS SHALL NOT EXCEED 0.25 PER SIDE.
DIMENSION E1 DOES NOT INCLUDE INTERLEAD FLASH OR
PROTRUSION. INTERLEAD FLASH AND PROTRUSION SHALL
NOT EXCEED 0.25 PER SIDE.
5. DIMENSIONS D AND E1 ARE DETERMINED AT DATUM H.
6. DATUMS A AND B ARE DETERMINED AT DATUM H.
e
D
A
GAUGE
PLANE
E
DETAIL A
b1
e1
B
3X
b
0.20
TOP VIEW
SIDE VIEW
C A-B D
M
H
c
A1
L
L2
E1
A
SEATING
PLANE
c
0.10 C
C
DETAIL A
SEATING
PLANE
END VIEW
DIM
A
A1
b
b1
c
D
E
E1
e
e1
L
L2
MILLIMETERS
MIN
MAX
0.80
1.12
0.01
0.15
0.30
0.51
0.76
0.94
0.08
0.20
2.80
3.05
2.10
2.64
1.20
1.40
1.92 BSC
0.20 BSC
0.35
0.70
0.25 BSC
RECOMMENDED
SOLDERING FOOTPRINT*
1.92
4X
0.75
2.70
0.20
3X
0.96
0.54
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
10
CM1223
PACKAGE DIMENSIONS
SOT−23, 5 Lead
CASE 527AH−01
ISSUE O
D
SYMBOL
E1
MIN
NOM
A
0.90
1.45
A1
0.00
0.15
A2
0.90
b
0.30
0.50
c
0.08
0.22
E
1.15
D
2.90 BSC
E
2.80 BSC
E1
1.60 BSC
L
1.30
0.95 BSC
e
e
0.45
0.30
L1
PIN #1 IDENTIFICATION
MAX
0.60
0.60 REF
L2
0.25 REF
θ
0°
4°
8°
θ1
5°
10°
15°
θ2
5°
10°
15°
TOP VIEW
θ1
A2
A
θ
b
θ2
L1
A1
SIDE VIEW
L2
L
END VIEW
Notes:
(1) All dimensions in millimeters. Angles in degrees.
(2) Complies with JEDEC standard MO-178.
http://onsemi.com
11
c
CM1223
PACKAGE DIMENSIONS
SOT−23, 6 Lead
CASE 527AJ
ISSUE B
D
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DATUM C IS THE SEATING PLANE.
B
6
5
4
1
2
3
E
E1
GAGE
PLANE
6X
e
TOP VIEW
L2
b
0.20
SEATING
PLANE
L
M
C A
S
B
S
DETAIL A
A2
c
A
6X
0.10 C
A1
SIDE VIEW
C
SEATING
PLANE
DETAIL A
END VIEW
RECOMMENDED
SOLDERING FOOTPRINT*
3.30
6X
0.85
6X
0.56
0.95
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
12
DIM
A
A1
A2
b
c
D
E
E1
e
L
L2
MILLIMETERS
MIN
MAX
--1.45
0.00
0.15
0.90
1.30
0.20
0.50
0.08
0.26
2.70
3.00
2.50
3.10
1.30
1.80
0.95 BSC
0.20
0.60
0.25 BSC
CM1223
PACKAGE DIMENSIONS
MSOP 10, 3x3
CASE 846AE−01
ISSUE O
SYMBOL
MIN
NOM
A1
0.00
0.05
0.15
A2
0.75
0.85
0.95
b
0.17
0.27
c
0.13
0.23
D
2.90
3.00
3.10
E
4.75
4.90
5.05
E1
2.90
3.00
3.10
1.10
A
E
E1
0.50 BSC
e
L
0.40
0.60
L1
0.95 REF
L2
0.25 BSC
θ
MAX
0º
0.80
8º
DETAIL A
TOP VIEW
D
A
A2
c
A1
e
END VIEW
b
SIDE VIEW
q
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-187.
L2
L
L1
DETAIL A
iLinkt is a trademark of S.J.Electro Systems, Inc.
FireWire® is a registered trademark of Apple Computer, Inc.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
13
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CM1223/D
Similar pages