HP HLMP-C523-T0000 T - 13/4 super ultra-bright led lamp Datasheet

Agilent
T-13/4 Super Ultra-Bright LED Lamps
Data Sheet
HLMP-C115, HLMP-C117, HLMP-C123, HLMP-C215, HLMP-C223,
HLMP-C315, HLMP-C323, HLMP-C415, HLMP-C423, HLMP-C515,
HLMP-C523, HLMP-C615, HLMP-C623
Description
These non-diffused lamps are
designed to produce a bright light
source and smooth radiation
pattern. A slight tint is added to the
lens for easy color identification.
This lamp has been designed with a
20 mil lead frame, enhanced
flange, and tight meniscus
controls, making it compatible
with radial lead automated
insertion equipment.
Features
• Very high intensity
• Exceptional uniformity
• Microtint lens for color
identification
• Consistent viewability
All colors:
AlGaAs Red
High Efficiency Red
Yellow
Orange
Green
Emerald Green
• 15° and 25° family
• Tape and reel options available
• Binned for color and intensity
Applications
• Ideal for backlighting front panels*
• Used for lighting switches
• Adapted for indoor and outdoor
signs
Selection Guide
Color
DH AS AlGaAs
Red
Yellow
Orange
Green
Emerald Green
2
2θ
θ1/2[1]
15
Standoff Leads
No
25
Yes
No
15
No
25
No
15
No
25
No
15
No
25
No
15
No
25
No
15
No
25
No
Part Number
HLMPC115
C115-O00xx
C115-OP0xx
C117-OP0xx
C123
C123-L00xx
C215
C215-M00xx
C215-MN0xx
C223
C223-L00xx
C223-MN0xx
C315
C315-L00xx
C315-LM0xx
C323
C323-K00xx
C323-KL0xx
C415
C415-M00xx
C415-M0D0xx
C415-MN0xx
C423
C423-L00xx
C423-LM0xx
C515
C515-L00xx
C515-LM0xx
C523
C523-J00xx
C523-KL0xx
C615
C615-G00xx
C623
C623-E00xx
Luminous Intensity Iv (mcd)
Min.
Max.
290.0
–
290.0
–
290.0
1000.0
290.0
1000.0
90.2
–
90.2
–
138.0
–
138.0
–
138.0
400.0
90.2
–
90.2
–
138.0
400.0
147.0
–
147.0
–
147.0
424.0
96.2
–
96.2
–
96.2
294.0
138.0
–
138.0
–
138.0
–
138.0
400.0
90.2
–
90.2
–
90.2
276.0
170.0
–
170.0
170.0
490.0
69.8
–
69.8
–
111.7
340.0
17.0
–
17.0
–
6.7
–
6.7
–
Part Numbering System
HLMP - C x xx - x x x xx
Mechanical Options
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B2: Right Angle Housing, Even Leads
UQ: Ammo Pack, Horizontal Leads
Color Bin Options
0: Full Color Bin Distribution
D: Color Bins 4 & 5 only
Maximum Iv Bin Options
0: Open (No Maximum Limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle & Standoffs Options
15: 15 Degree, without Standoffs
17: 15 Degree, with Standoffs
23: 25 Degree, without Standoffs
Color Options
1. AS AlGaAs Red
2. High Efficiency Red
3. Yellow
4. Orange
5. Green
6. Emerald Green
Package Options
C: T-1 3/4 (5 mm)
3
Package Dimensions
5.00 ± 0.20
(0.197 ± 0.008)
5.00 ± 0.20 (NOTE 1)
(0.197 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
12.60 ± 0.18
(0.496 ± 0.007)
8.71 ± 0.20
(0.343 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
1.85 (0.073)
MAX.
31.60 MIN.
(1.244)
0.70 (0.028)
MAX.
31.60
MIN.
(1.244)
1.50 ± 0.15
(0.059 ± 0.006)
0.70 (0.028)
MAX.
CATHODE
LEAD
CATHODE
LEAD
1.00 MIN.
(0.039)
0.50 ± 0.10 SQ. TYP.
(0.020 ± 0.004)
1.00 MIN.
(0.039)
5.80 ± 0.20
(0.228 ± 0.008)
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
FLAT
0.50 ± 0.10 SQ. TYP.
(0.020 ± 0.004)
CATHODE
FLAT
2.54 ± 0.38
(0.100 ± 0.015)
2.54 ± 0.38
(0.100 ± 0.015)
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
2. LEADS ARE MILD STEEL, SOLDER DIPPED.
3. AN EPOXY MENISCUS MAY EXTEND ABOUT
0.5 mm (0.020 in.) DOWN THE LEADS.
HLMP-Cx15 and HLMP-Cx23
HLMP-Cx17
Absolute Maximum Ratings at TA = 25°C
Parameter
DC Forward Current[1]
Transient Forward Current[2]
(10 µsec Pulse)
Reverse Voltage (Ir = 100 µA)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Wave Soldering Temperature
[1.59 mm (0.063 in.) from body]
Lead Solder Dipping Temperature
[1.59 mm (0.063 in.) from body]
DH AS
AlGaAs
Red
30
500
5
110
–20 to +100
High
Efficiency
Red and
Orange
30
500
Yellow
20
500
5
110
5
110
–55 to +100
–55 to +100
250°C for 3 seconds
High
Performance
Green and
Emerald Green
30
500
5
110
–20 to +100
260°C for 5 seconds
Notes:
1. See Figure 5 for maximum current derating vs. ambient temperature.
2. The transient current is the maximum nonrecurring peak current the device can withstand without damaging the LED die and wire bond.
4
Units
mA
mA
V
°C
°C
°C
Electrical Characteristics at TA = 25°C
Part Number
HLMP-C115
HLMP-C117
HLMP-C123
HLMP-C215
HLMP-C223
HLMP-C315
HLMP-C323
HLMP-C415
HLMP-C423
HLMP-C515
HLMP-C523
HLMP-C615
HLMP-C623
Forward
Voltage
Vf (Volts)
@ If = 20 mA
Typ. Max.
1.8
2.2
Reverse
Breakdown
Vr (Volts)
@ Ir = 100 µA
Min.
5
Capacitance
C (pF)
Vf = 0
f = 1 MHz
Typ.
30
Thermal
Resistance
θJ-PIN
Rθ
(°C/W)
210
Speed of Response
τs (ns)
Time Constant
e-t/ττs
Typ.
30
1.9
2.6
5
11
210
90
2.1
2.6
5
15
210
90
1.9
2.6
5
4
210
280
2.2
3.0
5
18
210
260
2.2
3.0
5
18
210
260
Optical Characteristics at TA = 25°C
Part Number
HLMP-C115
HLMP-C117
HLMP-C123
HLMP-C215
HLMP-C315
HLMP-C415
HLMP-C515
HLMP-C615
Luminous
Intensity
Iv (mcd)
@ 20 mA[1]
Min. Typ.
290
600
90
138
90
146
96
138
90
170
69
17
6
200
300
170
300
170
300
170
300
170
45
27
Peak
Wavelength
λpeak (nm)
Typ.
645
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
637
635
626
583
585
600
602
568
570
558
560
Viewing
Angle
θ1/2
2θ
(Degrees)[3]
Typ.
11
26
17
23
17
25
17
23
20
28
20
28
Luminous
Efficacy
ηv
(lm/w)
80
145
500
380
595
656
Notes:
1. The luminous intensity, Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. 2θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.
5
1.0
ORANGE
RELATIVE INTENSITY
EMERALD GREEN
TA = 25° C
TS AlGaAs RED
DH As AlGaAs RED
HIGH
PERFORMANCE
GREEN
HIGH EFFICIENCY RED
0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength.
HIGH EFFICIENCY RED, ORANGE,
YELLOW, AND HIGH PERFORMANCE
GREEN, EMERALD GREEN
100
TS AlGaAs RED
50.0
20.0
10.0
5.0
2.0
1.0
0.5
0.2
0.1
HIGH
PERFORMANCE
GREEN,
EMERALD GREEN
DH As AlGaAs RED
100.0
IF – FORWARD CURRENT – mA
IF – FORWARD CURRENT – mA
300.0
200.0
0
0.5
1.0
1.5
2.0
2.5
3.0
80
YELLOW
40
20
0
3.5
HIGH
EFFICIENCY
RED/ORANGE
60
1.0
0
2.0
3.0
4.0
5.0
VF – FORWARD VOLTAGE – V
VF – FORWARD VOLTAGE – V
Figure 2. Forward current vs. forward voltage (non-resistor lamp).
5.0
1.6
2.0
1.4
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
HER, ORANGE, YELLOW, AND HIGH
PERFORMANCE GREEN, EMERALD GREEN
DH As AlGaAs RED
1.0
0.5
TS AlGaAs RED
0.2
0.1
0.05
0.02
0.01
0.1 0.2
1.0
0.8
0.6
0.4
0.2
0
0.5
1
2
5
10
20 30 50
IF – DC FORWARD CURRENT – mA
Figure 3. Relative luminous intensity vs. forward current.
6
1.2
0
5
10
15
20
25
IDC – DC CURRENT PER LED – mA
30
HER, ORANGE, YELLOW, HIGH
PERFORMANCE GREEN, EMERALD GREEN
DH As AlGaAs RED
1.3
1.2
YELLOW
EMERALD GREEN
1.2
ηPEAK – RELATIVE EFFICIENCY
(NORMALIZED AT 20 mA)
RELATIVE EFFICIENCY
(NORMALIZED AT 20 mA)
1.0
0.8
0.6
0.4
0.2
0
1.1
HIGH EFFICIENCY
RED/ORANGE
1.0
0.9
HIGH PERFORMANCE GREEN
0.8
0.7
0.6
0.5
0.4
10
0
50
20
200 300
100
0
10
20
30 40
50
70
60
80
90
IPEAK – PEAK FORWARD CURRENT – mA
IPEAK – PEAK FORWARD CURRENT – mA
Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.
HER, ORANGE, YELLOW, AND HIGH
PERFORMANCE GREEN, EMERALD GREEN
40
35
35
IF – FORWARD CURRENT – mA
IF – FORWARD CURRENT – mA
DH As AlGaAs RED
40
30
25
RθJA = 559° C/W
20
RθJA = 689° C/W
15
10
5
0
20
0
60
40
30
TA – AMBIENT TEMPERATURE – °C
RθJA = 470° C/W
25
RθJA = 300° C/W
20
YELLOW
15
10
RθJA = 705° C/W
5
0
100
80
HER, ORANGE, GREEN,
EMERALD GREEN
0
20
40
60
80
100
TA – AMBIENT TEMPERATURE – °C
Figure 5. Maximum forward dc current vs. ambient temperature. Derating based on TjMAX = 110°C.
NORMALIZED LUMINOUS INTENSITY
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
45
40
35
30
25
20
15
10
5
0
-5 -10 -15 -20 -25 -30 -35 -40 -45
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Relative luminous intensity vs. angular displacement. 15 degree family.
7
NORMALIZED LUMINOUS INTENSITY
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
45
40
35
30
25
20
15
10
5
0
-5 -10 -15 -20 -25 -30 -35 -40 -45
ANGULAR DISPLACEMENT – DEGREES
Figure 7. Relative luminous intensity vs. angular displacement. 25 degree family.
Intensity Bin Limits
Color
Red/Orange
Yellow
8
Bin
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
L
M
N
O
P
Q
R
S
T
U
V
W
Intensity Range (mcd)
Min.
Max.
101.5
162.4
162.4
234.6
234.6
340.0
340.0
540.0
540.0
850.0
850.0
1200.0
1200.0
1700.0
1700.0
2400.0
2400.0
3400.0
3400.0
4900.0
4900.0
7100.0
7100.0
10200.0
10200.0
14800.0
14800.0
21400.0
21400.0
30900.0
173.2
250.0
250.0
360.0
360.0
510.0
510.0
800.0
800.0
1250.0
1250.0
1800.0
1800.0
2900.0
2900.0
4700.0
4700.0
7200.0
7200.0
11700.0
11700.0
18000.0
18000.0
27000.0
Intensity Bin Limits, continued
Color
Green/
Emerald Green
Bin
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
Intensity Range (mcd)
Min.
Max.
7.6
12.0
12.0
19.1
19.1
30.7
30.7
49.1
49.1
78.5
78.5
125.7
125.7
201.1
201.1
289.0
289.0
417.0
417.0
680.0
680.0
1100.0
1100.0
1800.0
1800.0
2700.0
2700.0
4300.0
4300.0
6800.0
6800.0
10800.0
10800.0
16000.0
16000.0
25000.0
25000.0
40000.0
Maximum tolerance for each bin limit is ± 18%.
Color Categories
Color
Green
Yellow
Orange
Category #
6
5
4
3
2
1
3
2
4
5
1
2
3
4
5
6
7
8
Tolerance for each bin limit is ± 0.5 nm.
9
Lambda (nm)
Min.
561.5
564.5
567.5
570.5
573.5
582.0
584.5
587.0
589.5
592.0
597.0
599.5
602.0
604.5
607.5
610.5
613.5
616.5
Max.
564.5
567.5
570.5
573.5
576.5
584.5
587.0
589.5
592.0
593.0
599.5
602.0
604.5
607.5
610.5
613.5
616.5
619.5
Mechanical Option Matrix
Mechanical Option Code
00
01
02
B2
UQ
Definition
Bulk Packaging, minimum increment 500 pcs/bag
Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
Right Angle Housing, even leads, minimum increment 500 pcs/bag
Ammo Pack, horizontal leads, in 1K minimum increment
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent
representative for further clarification/information.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5965-6165E
November 11, 2004
5988-2149EN
Similar pages