Minmax ABF-04S09 Ac/dc power module 4w Datasheet

ABF-04 SERIES
AC/DC Power Module 4W
FEATURES
►Fully Encapsulated Plastic Case for PCB Mounting
►Universal Input 85~264VAC, 47~440Hz
►Protection Class II as per IEC/EN 60536
►I/O Isolation 3000VAC with Reinforced Insulation
►Operating Ambient Temp. Range -25°C to +60°C
►No Min. Load Requirement
►Overload/Voltage/Temp. and Short Circuit Protection
►Designed-in EMI Emission meets EN55011/22 Class B & FCC
Level B
►Designed-in EMC Immunity meets EN61000-4-2,3,4,5,6,8,11
►Eco Design, Compliant to Energy Star Specification and ErP
Directive 2009/125/EC
►UL/cUL/IEC/EN 60950-1 Safety Approval & CE Marking
PRODUCT OVERVIEW
The MINMAX ABF-04 series is a new range of fully encapsulated AC/DC power supply modules. They are designed for direct PCB mounting with solder
pins. The product features EMI-filter to EN55022, class B and EMS compliance to the EN 61000-4 standard.
Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets.
The ABF-04 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment.
Model Selection Guide
Model
Number
Output
Voltage
VDC
3.3
5
9
12
15
24
+5
+3.3
+12
+5
±12
±15
ABF-04S03
ABF-04S05
ABF-04S09
ABF-04S12
ABF-04S15
ABF-04S24
ABF-04D53
ABF-04D125
ABF-04D12
ABF-04D15
Output Current
Input Current
Max.
@Max. Load
mA
1200
800
444
333
267
167
600
150
250
120
±166
±133
mA(typ.)
82
82
77
76
76
76
Max. capacitive
Load
Efficiency
(typ.)
@Max. Load
μF
1200
800
440
330
260
160
5600
4700
330
4700
# 330
# 260
# For each output
72
72
76
76
%
70
72
75
76
76
77
72
75
77
77
Input Specifications
Parameter
Model
Input Voltage Range
Input Frequency Range
All Models
Input Voltage Range
No-Load Power Consumption
Inrush Current (Cold Start at 25℃)
E-mail:[email protected]
2015/07/31
REV:9
Typ.
Max.
Unit
85
---
264
VAC
47
---
440
Hz
120
---
370
VDC
---
---
0.3
W
115VAC
---
---
15
A
230VAC
---
---
25
A
Tel:886-6-2923150
Page 1 of 3
Min.
ABF-04 SERIES
AC/DC POWER MODULE 4W
Output Specifications
Parameter
Output Voltage Setting Accuracy
Line Regulation
Conditions
Min.
Typ.
Max.
Unit
Single and Dual Output Models
ABF-04D53 & ABF-04D125
Single and Dual Output Models
----------------------No min. Load
required
---------
±1.0
±2.0
±0.5
±0.5
±1.0
±1.0
±0.5
±0.5
±2.5
100
0.8
±2.0
±5.0
±1.0
±1.0
±3.0
±1.5
±1.0
±1.0
±5.0
150
1.0
%Vnom.
%Vnom.
%
%
%
%
%
%
%
mV P-P
%VPP of Vo
---
---
%Inom.
25
120
±0.01
---
----±0.02
5
%Inom.
% of Vo
%/℃
%Vout
---
%Inom.
Max.
---------
Unit
VAC
MΩ
KHz
ms
Hours
Vo1
Vo2
ABF-04D53 & ABF-04D125
3.3VDC Output Model
5~24VDC and Dual Output Models
Load Regulation
Vo1
Vo2
3.3V & 5VDC Output Models
Other Output Models
ABF-04D53 & ABF-04D125
Ripple & Noise
0-20 MHz Bandwidth
Single Output and Dual +/- Output Models
Minimum Load
Dual +/+ Output Models
Zener diode clamp
Over Voltage Protection
Temperature Coefficient
Overshoot
Foldback, auto-recovery
105
--(long term overload condition may cause damage)
Hiccup mode, Automatic Recovery
Current Limitation
Short Circuit Protection
General Specifications
Parameter
I/O Isolation Voltage
I/O Isolation Resistance
Switching Frequency
Hold-up Time
MTBF (calculated)
Protection Class II
Safety Approvals
Conditions
Input to Output, 60 Seconds
500 VDC
Min.
3000
100
-----
MIL-HDBK-217F@25℃, Ground Benign
Typ.
----130
20
330,000
According IEC/EN 60536
UL/cUL 60950-1 recognition(UL certificate) , IEC/EN 60950-1(CB-report)
EMC Specifications
Parameter
Standards & Level
Performance
EMI
Conduction and Radiation
EN 55011,EN55022, FCC part 15
Class B
EMS
EN 55011,EN55024
ESD
Radiated immunity
Fast transient
Surge
Conducted immunity
PFMF
Dips
Interruptions
EN61000-4-2 air ± 8kV , Contact ± 4kV
EN61000-4-3 10V/m
EN61000-4-4 ±2kV
EN61000-4-5 ±1kV
EN61000-4-6 10Vrms
EN61000-4-8 30A/m
EN61000-4-11 30% 10ms
EN61000-4-11 >95% 5000ms
B
A
B
B
B
A
B
C
Environmental Specifications
Parameter
Operating Ambient Temperature Range
(See Power Derating Curve)
Storage Temperature Range
Power Derating
Over Temperature Protection
Humidity (non condensing)
Cooling
Lead Temperature (1.5mm from case for 10Sec.)
E-mail:[email protected]
2015/07/31
REV:9
Conditions
Min.
Max.
Unit
Natural Convection
-25
+60
℃
Tel:886-6-2923150
Page 2 of 3
-40
+50℃ to +60℃
+85
0.3
at 90℃ (automatic recovery at 67℃)
--95
Natural Convection
---
260
℃
W/℃
% rel. H
℃
ABF-04 SERIES
AC/DC POWER MODULE 4W
Notes
1
2
3
4
5
All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted.
These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power
supplies however they may not meet all listed specifications.
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory
Specifications are subject to change without notice
Package Specifications
Mechanical Dimensions
Pin Connections
2x3.75
[2x0.15]
Pin
D12/D15
NC
2
NC
D53/D125
+Vout
+Vout
+Vout1
4
-Vout
Common
Common
5
5
No Pin
-Vout
+Vout2
Bottom View
0.60 [0.02]
3
4
36.5 [1.44]
3
14.00 [0.55]
25.25 [0.99]
2
Single Output
1
6
AC(N)
7
AC(L)
7.50
[0.30]
6
7.50
[0.30]
1
21.00 [0.83]
27.0 [1.06]
►All dimensions in mm
3.75
[0.15]
3.00
[0.12]
7
4.0
[0.16]
17.1
[0.67]
►Tolerance: ±0.5
►Pin
(inches)
(±0.01)
diameter  0.6 ±0.1 (0.02±0.004)
Physical Characteristics
Case Size
:
36.5x27.0x17.1mm (1.44x1.06x0.67 inches)
Case Material
:
Plastic resin (flammability to UL 94V-0 rated)
Pin Material
:
Copper Alloy with Gold Plate Over Nickel Subplate
Weight
:
30g
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected]
2015/07/31
REV:9
Page 3 of 3
Similar pages