VISHAY V20150SG

New Product
V20150SG, VF20150SG, VB20150SG & VI20150SG
Vishay General Semiconductor
High-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.57 V at IF = 5 A
FEATURES
TMBS ®
TO-220AB
• Trench MOS Schottky technology
ITO-220AB
• Low forward voltage drop, low power
losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF
maximum peak of 245 °C (for TO-263AB package)
2
3
1
V20150SG
2
1
3
VF20150SG
PIN 1
PIN 2
PIN 1
PIN 3
CASE
PIN 3
TO-263AB
PIN 2
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TO-262AA
K
K
TYPICAL APPLICATIONS
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, dc-to-dc
converters and reverse battery protection.
A
NC
1
VB20150SG
NC
2
3
VI20150SG
K
A
• Solder bath temperature 275 °C maximum, 10 s,
per JESD 22-B106 (for TO-220AB, ITO-220AB,
and TO-262AA package)
HEATSINK
PIN 1
PIN 2
PIN 3
K
PRIMARY CHARACTERISTICS
IF(AV)
20 A
VRRM
150 V
IFSM
140 A
VF at IF = 20 A
0.77 V
TJ max.
150 °C
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB and
TO-262AA
Molding compound meets UL 94 V-0 flammability
rating
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V20150SG
VF20150SG
VB20150SG
VI20150SG
UNIT
Maximum repetitive peak reverse voltage
VRRM
150
V
Maximum average forward rectified current (fig. 1)
IF(AV)
20
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
140
A
Non-repetitive avalanche energy
at TJ = 25 °C, L = 60 mH
EAS
110
mJ
Peak repetitive reverse current
at tp = 2 µs, 1 kHz, TJ = 38 °C ± 2 °C
IRRM
0.5
A
Voltage rate of change (rated VR)
dV/dt
10 000
V/µs
Isolation voltage (ITO-220AB only)
from terminal to heatsink t = 1 min
VAC
1500
V
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature range
Document Number: 89060
Revision: 24-Jun-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
New Product
V20150SG, VF20150SG, VB20150SG & VI20150SG
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IR = 1.0 mA
Breakdown voltage
IF = 5 A
IF = 10 A
IF = 20 A
Instantaneous forward voltage (1)
TA = 25 °C
SYMBOL
TYP.
MAX.
UNIT
VBR
150 (minimum)
-
V
0.72
0.87
1.24
1.60
0.84
TA = 25 °C
V
VF
IF = 5 A
IF = 10 A
IF = 20 A
TA = 125 °C
0.57
0.65
0.77
VR = 100 V
TA = 25 °C
TA = 125 °C
1.5
2
-
µA
mA
VR = 150 V
TA = 25 °C
TA = 125 °C
4
200
20
µA
mA
Reverse current (2)
IR
Notes
(1)
(2)
Pulse test: 300 µs pulse width, 1 % duty cycle
Pulse test: Pulse width ≤ 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
V20150SG
VF20150SG
VB20150SG
VI20150SG
UNIT
RθJC
2.0
4.0
2.0
2.0
°C/W
Typical thermal resistance
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AB
V20150SG-E3/4W
PREFERRED P/N
1.88
4W
50/tube
Tube
ITO-220AB
VF20150SG-E3/4W
1.75
4W
50/tube
Tube
TO-263AB
VB20150SG-E3/4W
1.38
4W
50/tube
Tube
TO-263AB
VB20150SG-E3/8W
1.38
8W
800/reel
Tape and reel
TO-262AA
VI20150SG-E3/4W
1.45
4W
50/tube
Tube
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
20
Resistive or Inductive Load
D = 0.8
D = 0.5
18
V(B,I)20150SG
20
Average Power Loss (W)
Average Forward Rectified Current (A)
25
VF20150SG
15
10
5
D = 0.3
16
D = 0.2
14
12
D = 1.0
D = 0.1
10
8
T
6
4
2
Mounted on Specific Heatsink
D = tp/T
tp
0
0
0
25
50
75
100
125
150
175
0
2
4
6
8
10
12
14
16
18
20
22
24
Case Temperature (°C)
Average Forward Current (A)
Figure 1. Maximum Forward Current Derating Curve
Figure 2. Forward Power Loss Characteristics
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 89060
Revision: 24-Jun-09
New Product
V20150SG, VF20150SG, VB20150SG & VI20150SG
Vishay General Semiconductor
10
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
TA = 150 °C
10
TA = 125 °C
TA = 100 °C
1
TA = 25 °C
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
V(B,I)20150SG
1
0.01
1.6
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Figure 3. Typical Instantaneous Forward Characteristics
Figure 6. Typical Transient Thermal Impedance
10
10
Transient Thermal Impedance (°C/W)
100
Instantaneous Reverse Current (mA)
Junction to Case
TA = 150 °C
1
TA = 125 °C
TA = 100 °C
0.1
0.01
TA = 25 °C
0.001
0.0001
10
20
30
40
50
60
70
80
90
100
Junction to Case
1
VF20150SG
0.1
0.01
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Figure 4. Typical Reverse Characteristics
Figure 7. Typical Transient Thermal Impedance
Junction Capacitance (pF)
10 000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
100
10
0.1
1
10
100
Reverse Voltage (V)
Figure 5. Typical Junction Capacitance
Document Number: 89060
Revision: 24-Jun-09
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
New Product
V20150SG, VF20150SG, VB20150SG & VI20150SG
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AB
ITO-220AB
0.370 (9.40)
0.360 (9.14)
0.185 (4.70)
0.175 (4.44)
0.154 (3.91)
0.148 (3.74)
PIN
2
3
0.160 (4.06)
0.140 (3.56)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.105 (2.67)
0.095 (2.41)
0.104 (2.65)
0.096 (2.45)
2
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
3
7° REF.
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.560 (14.22)
0.530 (13.46)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.022 (0.56)
0.014 (0.36)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.057 (1.45)
0.045 (1.14)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
0.671 (17.04)
0.651 (16.54)
PIN
1
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.603 (15.32)
0.573 (14.55)
7° REF.
0.076 (1.93) REF.
45° REF.
0.145 (3.68)
0.135 (3.43)
0.635 (16.13)
0.625 (15.87)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.055 (1.39)
0.045 (1.14)
0.113 (2.87)
0.103 (2.62)
1
0.190 (4.83)
0.170 (4.32)
0.404 (10.26)
0.384 (9.75)
0.415 (10.54) MAX.
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
TO-262AA
0.185 (4.70)
0.175 (4.44)
0.411 (10.45) MAX.
0.250 (6.35) MIN.
30° (TYP.)
(REF.)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
K
0.950 (24.13)
0.920 (23.37)
1
PIN
2
0.401 (10.19)
0.381 (9.68)
0.350 (8.89)
0.330 (8.38)
0.510 (12.95)
0.470 (11.94)
3
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
PIN 1
PIN 2
PIN 3
HEATSINK
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.022 (0.56)
0.014 (0.35)
0.205 (5.20)
0.195 (4.95)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.055 (1.40)
0.045 (1.14)
Mounting Pad Layout
0.42 (10.66) MIN.
K
0.360 (9.14)
0.320 (8.13)
NC
K
A
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
www.vishay.com
4
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.33 (8.38) MIN.
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 89060
Revision: 24-Jun-09
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000