ONSEMI MC10106L

MC10106
Triple 4-3-3-Input NOR
Gate
•
•
•
The MC10106 is a triple 4–3–3 input NOR gate.
PD = 30 mW typ/gate (No Load)
tpd = 2.0 ns typ
tr, tf = 2.0 ns typ (20%–80%)
http://onsemi.com
MARKING
DIAGRAMS
LOGIC DIAGRAM
4
5
16
CDIP–16
L SUFFIX
CASE 620
3
6
7
MC10106L
AWLYYWW
1
9
10
11
2
12
13
14
16
PDIP–16
P SUFFIX
CASE 648
15
MC10106P
AWLYYWW
1
1
VCC1 = PIN 1
VCC2 = PIN 16
VEE = PIN 8
PLCC–20
FN SUFFIX
CASE 775
DIP
PIN ASSIGNMENT
VCC1
1
16
VCC2
BOUT
2
15
COUT
AOUT
3
14
CIN
AIN
4
13
CIN
AIN
5
12
CIN
AIN
6
11
BIN
AIN
7
10
VEE
8
9
A
WL
YY
WW
10106
AWLYYWW
= Assembly Location
= Wafer Lot
= Year
= Work Week
ORDERING INFORMATION
Device
Package
Shipping
MC10106L
CDIP–16
25 Units / Rail
BIN
MC10106P
PDIP–16
25 Units / Rail
BIN
MC10106FN
PLCC–20
46 Units / Rail
Pin assignment is for Dual–in–Line Package.
For PLCC pin assignment, see the Pin Conversion Tables on page 18
of the ON Semiconductor MECL Data Book (DL122/D).
 Semiconductor Components Industries, LLC, 2002
January, 2002 – Rev. 7
1
Publication Order Number:
MC10106/D
MC10106
ELECTRICAL CHARACTERISTICS
Test Limits
Characteristic
Symbol
Pin
Under
Test
Power Supply Drain Current
IE
8
23
IinH
4
425
Input Current
–30°C
Min
+25°C
Max
Min
+85°C
Typ
Max
Max
Unit
17
21
Min
23
mAdc
265
265
µAdc
0.5
µAdc
IinL
4
0.5
Output Voltage
Logic 1
VOH
3
2
–1.060
–1.060
–0.890
–0.890
–0.960
–0.960
–0.810
–0.810
–0.890
–0.890
0.3
–0.700
–0.700
Vdc
Output Voltage
Logic 0
VOL
3
2
–1.890
–1.890
–1.675
–1.675
–1.850
–1.850
–1.650
–1.650
–1.825
–1.825
–1.615
–1.615
Vdc
Threshold Voltage
Logic 1
VOHA
3
2
–1.080
–1.080
Threshold Voltage
Logic 0
VOLA
3
2
t4+3–
t4–3+
3
3
1.0
1.0
3.1
3.1
1.0
1.0
2.0
2.0
2.9
2.9
1.0
1.0
3.3
3.3
–0.980
–0.980
–0.910
–0.910
–1.655
–1.655
Vdc
–1.630
–1.630
–1.595
–1.595
Switching Times (50Ω Load)
Propagation Delay
Vdc
ns
Rise Time
(20 to 80%)
t3+
3
1.1
3.6
1.1
2.0
3.3
1.1
3.7
Fall Time
(20 to 80%)
t3–
3
1.1
3.6
1.1
2.0
3.3
1.1
3.7
ELECTRICAL CHARACTERISTICS (continued)
TEST VOLTAGE VALUES (Volts)
Characteristic
Power Supply Drain Current
Input Current
@ Test Temperature
VIHmax
VILmin
VIHAmin
VILAmax
VEE
–30°C
–0.890
–1.890
–1.205
–1.500
–5.2
+25°C
–0.810
–1.850
–1.105
–1.475
–5.2
+85°C
–0.700
–1.825
–1.035
–1.440
–5.2
Symbol
Pin
Under
Test
IE
8
IinH
4
IinL
4
Output Voltage
Logic 1
VOH
3
2
Output Voltage
Logic 0
VOL
3
2
Threshold Voltage
Logic 1
VOHA
3
2
Threshold Voltage
Logic 0
VOLA
3
2
Switching Times
TEST VOLTAGE APPLIED TO PINS LISTED BELOW
VIHmax
VILmin
VILAmax
4
4
4
9
4
9
4
9
(50Ω Load)
Propagation Delay
VIHAmin
VEE
(VCC)
Gnd
8
1, 16
8
1, 16
8
1, 16
8
8
1, 16
1, 16
8
8
1, 16
1, 16
8
8
1, 16
1, 16
8
8
1, 16
1, 16
Pulse In
Pulse Out
–3.2 V
+2.0 V
t4+3–
t4–3+
3
3
4
4
3
3
8
8
1, 16
1, 16
Rise Time
(20 to 80%)
t3+
3
4
3
8
1, 16
Fall Time
(20 to 80%)
t3–
3
4
3
8
1, 16
Each MECL 10,000 series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been
established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is maintained.
Outputs are terminated through a 50-ohm resistor to –2.0 volts. Test procedures are shown for only one gate. The other gates are tested in the
same manner.
http://onsemi.com
2
MC10106
PACKAGE DIMENSIONS
PLCC–20
FN SUFFIX
PLASTIC PLCC PACKAGE
CASE 775–02
ISSUE C
0.007 (0.180)
B
Y BRK
–N–
M
T L-M
0.007 (0.180)
U
M
N
S
T L-M
S
G1
0.010 (0.250)
S
N
S
D
–L–
–M–
Z
W
20
D
1
X
V
S
T L-M
S
N
S
VIEW D–D
A
0.007 (0.180)
M
T L-M
S
N
S
R
0.007 (0.180)
M
T L-M
S
N
S
Z
0.007 (0.180)
H
M
T L-M
S
N
S
K1
K
C
E
F
0.004 (0.100)
G
J
–T–
VIEW S
G1
0.010 (0.250) S T L-M
S
N
S
0.007 (0.180)
M
T L-M
S
VIEW S
SEATING
PLANE
NOTES:
1. DATUMS -L-, -M-, AND -N- DETERMINED
WHERE TOP OF LEAD SHOULDER EXITS PLASTIC
BODY AT MOLD PARTING LINE.
2. DIMENSION G1, TRUE POSITION TO BE
MEASURED AT DATUM -T-, SEATING PLANE.
3. DIMENSIONS R AND U DO NOT INCLUDE MOLD
FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250)
PER SIDE.
4. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
5. CONTROLLING DIMENSION: INCH.
6. THE PACKAGE TOP MAY BE SMALLER THAN THE
PACKAGE BOTTOM BY UP TO 0.012 (0.300).
DIMENSIONS R AND U ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY
EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS,
GATE BURRS AND INTERLEAD FLASH, BUT
INCLUDING ANY MISMATCH BETWEEN THE TOP
AND BOTTOM OF THE PLASTIC BODY.
7. DIMENSION H DOES NOT INCLUDE DAMBAR
PROTRUSION OR INTRUSION. THE DAMBAR
PROTRUSION(S) SHALL NOT CAUSE THE H
DIMENSION TO BE GREATER THAN 0.037 (0.940).
THE DAMBAR INTRUSION(S) SHALL NOT CAUSE
THE H DIMENSION TO BE SMALLER THAN 0.025
(0.635).
http://onsemi.com
3
DIM
A
B
C
E
F
G
H
J
K
R
U
V
W
X
Y
Z
G1
K1
INCHES
MIN
MAX
0.385
0.395
0.385
0.395
0.165
0.180
0.090
0.110
0.013
0.019
0.050 BSC
0.026
0.032
0.020
--0.025
--0.350
0.356
0.350
0.356
0.042
0.048
0.042
0.048
0.042
0.056
--0.020
2
10 0.310
0.330
0.040
---
MILLIMETERS
MIN
MAX
9.78
10.03
9.78
10.03
4.20
4.57
2.29
2.79
0.33
0.48
1.27 BSC
0.66
0.81
0.51
--0.64
--8.89
9.04
8.89
9.04
1.07
1.21
1.07
1.21
1.07
1.42
--0.50
2
10 7.88
8.38
1.02
---
N
S
MC10106
–A–
16
9
1
8
–B–
CDIP–16
L SUFFIX
CERAMIC DIP PACKAGE
CASE 620–10
ISSUE T
C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
4. DIMENSION F MAY NARROW TO 0.76 (0.030)
WHERE THE LEAD ENTERS THE CERAMIC
BODY.
L
DIM
A
B
C
D
E
F
G
H
K
L
M
N
–T–
K
N
SEATING
PLANE
M
E
F
J
G
D
16 PL
0.25 (0.010)
16 PL
0.25 (0.010)
M
T A
T B
M
S
PDIP–16
P SUFFIX
PLASTIC DIP PACKAGE
CASE 648–08
ISSUE R
–A–
16
9
1
8
B
F
C
L
S
–T–
SEATING
PLANE
K
H
G
D
M
J
16 PL
0.25 (0.010)
M
S
T A
M
INCHES
MIN
MAX
0.750
0.785
0.240
0.295
--0.200
0.015
0.020
0.050 BSC
0.055
0.065
0.100 BSC
0.008
0.015
0.125
0.170
0.300 BSC
0
15 0.020
0.040
MILLIMETERS
MIN
MAX
19.05
19.93
6.10
7.49
--5.08
0.39
0.50
1.27 BSC
1.40
1.65
2.54 BSC
0.21
0.38
3.18
4.31
7.62 BSC
0
15 0.51
1.01
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
DIM
A
B
C
D
F
G
H
J
K
L
M
S
INCHES
MIN
MAX
0.740
0.770
0.250
0.270
0.145
0.175
0.015
0.021
0.040
0.70
0.100 BSC
0.050 BSC
0.008
0.015
0.110
0.130
0.295
0.305
0
10 0.020
0.040
MILLIMETERS
MIN
MAX
18.80
19.55
6.35
6.85
3.69
4.44
0.39
0.53
1.02
1.77
2.54 BSC
1.27 BSC
0.21
0.38
2.80
3.30
7.50
7.74
0
10 0.51
1.01
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: [email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
http://onsemi.com
4
MC10106/D