Marktech CCCCC-DXN-XHHKKMNT Creeâ® p4 led Datasheet

Cree® P4 LED
CP43B-RGS/AGS
Data Sheet
This revolutionary package design allows the lighting designer to reduce the number of
LEDs required and provide a more uniform and unique illuminated appearance than with
other LED solutions.
This is possible through the efficient optical package design and high current capabilities.
The low profile package can be easily coupled with reflectors or lenses to efficiently distribute
light and provide the desired lit appearance. This product family employs green and blue
LED materials, which allow designers to match the color of many lighting applications like
vehicle signal lamps and amusement lighting.
FEATURES
APPLICATIONS
• Size (mm): 7.6 x 7.6
• Channel Letter
• Color and Typical Dominant Wavelength (nm):
Red (624)
Amber (591)
• Amusement
• Luminous Intensity (mcd)
Red (2130 - 8200)
Amber (2130 - 8200)
• Lead-Free
1
D-CT1135.00
Data Sheet: CL
• RoHS Compliant
Subject to change without notice.
www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
Red/Amber
Forward Current
Peak Forward Current
IF
70
mA
Note1
IFP
200
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
210
mW
Operation Temperature
Topr
-40 ~ +100
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Max. 260°C for 5 sec. max.
(3 mm from the base of the epoxy bulb)
ESD
Class 2
Note2
Electrostatic Discharge
Classification (MIL-STD-883E)
Note:
1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C.
2. Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Color
Symbol
Condition
Unit
Typical
Red/Amber
VF
IF = 70 mA
V
Reverse Current
Red/Amber
IR
VR = 5 V
μA
Red
λD
IF = 70 mA
nm
618
624
630
Amber
λD
IF = 70 mA
nm
584
591
599
Luminous Intensity
50% Power Angle
3.0
100
Red
IV
IF = 70 mA
mcd
2130
4500
Amber
IV
IF = 70 mA
mcd
2130
5000
Red/Amber
2θ½H-H
IF = 70 mA
deg
90
Red/Amber
2θ½V-V
IF = 70 mA
deg
35
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
CLD-CT1135.001
2.5
Maximum
Forward Voltage
Dominant Wavelength
2
Minimum
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Intensity Bin Limit (IF = 70 mA)
Red
Amber
Bin Code
Min.(mcd)
Max.(mcd)
Bin Code
Min.(mcd)
Max.(mcd)
V0
2130
3000
V0
2130
3000
W0
3000
4180
W0
3000
4180
X0
4180
5860
X0
4180
5860
Y0
5860
8200
Y0
5860
8200
• Tolerance of measurement of luminous intensity is ±15%
Color Bin Limit (IF = 70 mA)
Red
Amber
Bin Code
Min.(nm)
Max.(nm)
Bin Code
Min.(nm)
Max.(nm)
RA
618
630
A2
584
587
A3
587
590
A4
590
593
A5
593
596
A6
596
599
• Tolerance of measurement of dominant wavelength is ±1 nm
VF Bin Limit (IF = 70 mA)
Red Amber Bin Code
Min.(V)
Max.(V)
Bin Code
Min.(V)
Max.(V)
23
2.0
2.2
23
2.0
2.2
24
2.2
2.4
24
2.2
2.4
25
2.4
2.6
25
2.4
2.6
26
2.6
2.8
26
2.6
2.8
27
2.8
3.0
27
2.8
3.0
• Tolerance of measurement of VF is ± 0.05V
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Order Code Table*
Kit Number
Viewing
Angle
Red
CP43B-RGS-CV0Y0AA4
Red
CP43B-RGS-CW0Y0AA4
Red
Color
Color
Luminous Intensity (mcd)
Dominant Wavelength
Min.
Max.
Color
Bin
90
2130
8200
RA
618
RA
630
90
3000
8200
RA
618
RA
630
CP43B-RGS-CX0Y0AA4
90
4180
8200
RA
618
RA
630
Kit Number
Viewing
Angle
Amber
CP43B-AGS-CV0Y0264
Amber
CP43B-AGS-CW0Y0354
Amber
CP43B-AGS-CX0Y0354
Luminous Intensity (mcd)
Min.
(nm)
Color
Bin
Max.
(nm)
Dominant Wavelength
Min.
Max.
Color
Bin
Min.
(nm)
Color
Bin
Max.
(nm)
90
2130
8200
A2
584
A6
599
90
3000
8200
A3
587
A5
596
90
4180
8200
A3
587
A5
596
Notes:
1. The above Kit numbers represent order codes which include multiple intensity-bin and color-bin codes.
Only one intensity-bin code and one color-bin code will be shipped on each reel.
And single intensity-bin code,single color-bin codes will not be orderable.
2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED
product safely.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
4
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Graphs










































































































The above data are collected from statistical figures that do not necessarily correspond to the actual
parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Burr around bottom of epoxy may be 0.5 mm max.

Notes
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
7
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Package
Features:
•
•
•
•
•
The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
The boxes are not water resistant, and they must be kept away from water and moisture.
The Tube Pack type of packaging.
Max 60 pcs per tube.
R
xxx xxx
R
C OL OR LED LAMP
T YPE
LXXXXXXXX-XXX
LOT
J OWAXXXXX -XX-XXX
QT Y
RANK
P CS
Iv
Vf
Hu e
X
XX
XX
AX XXX XXX XXX X
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and
the Cree logo are registered trademarks of Cree, Inc.
8
CLD-CT1135.001
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Similar pages