Dallas DS9105-008 Ibutton number set Datasheet

19-4879; Rev 8/09
DS9105
iButton Number Set
www.maxim-ic.com
FEATURES
EXAMPLES OF ACCESSORIES

DS1982-based iButtons branded with their
respective character for optimum legibility

128 bytes of user-programmable EPROM in
each iButton for maximum flexibility

Available as set of 12 (as shown in the
graphic) or as individual iButtons
DS9096P
DS9092GT
DS9097U
DS9106
DS9093RA
DS9093RB
Self-Stick Adhesive Pad
iButton Wand
COM-Port Adapter
iButton Halos
iButton Lock Ring
iButton Flange Enlargement
ORDERING INFORMATION
PART
TYPE
DS9105-SET#
DS9105-000#
DS9105-001#
DS9105-002#
DS9105-003#
DS9105-004#
DS9105-005#
DS9105-006#
DS9105-007#
DS9105-008#
DS9105-009#
DS9105-00C#
DS9105-00E#
COMPLETE SET OF 12
NUMBER ZERO
NUMBER ONE
NUMBER TWO
NUMBER THREE
NUMBER FOUR
NUMBER FIVE
NUMBER SIX
NUMBER SEVEN
NUMBER EIGHT
NUMBER NINE
CLEAR
ENTER
#Denotes a RoHS-compliant device that may include lead(Pb) that is
exempt under the RoHS requirements.
DESCRIPTION
Unlike conventional keypads, where data is entered by pressing a mechanical key, the solid buttons of an
iButton keypad allow users to enter data by simply touching each button with an iButton probe or
handheld computer. Each of these buttons comes from the factory with blank memory, allowing the user
to program each button with whatever data the user would like entered when touched. The iButton
keypad is a simple, robust alternative for data entry in harsh environments such as outdoors, industrial
workplaces and other locations, where a normal keypad is impractical to operate. Since iButtons are made
from stainless steel, this keypad is easily cleaned with hot water and detergent.
The individual iButtons that comprise the keypad can be arranged as desired to maximize ease of use.
They can be stuck on a smooth surface using adhesive pads or mounted through 16.5mm holes in a rigid
material and fastened by lock rings. The material thickness should not exceed 3.0mm. For a detailed
description of the communication protocol and the electrical characteristics of the iButton used in this
keypad, refer to the DS1982 data sheet.
iButton is a registered trademark of Maxim Integrated Products, Inc.
1 of 2
DS9105
REVISION HISTORY
REVISION
DESCRIPTION
DATE
8/09
Added RoHS-compliance indicators to the Ordering Information table.
PAGES
CHANGED
1
2 of 2
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim
reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
Similar pages