A Product Line of Diodes Incorporated FMMT593 100V PNP HIGH VOLTAGE TRANSISTOR IN SOT23 Features Mechanical Data • • • • • • • • • • • • • • • BVCEO > -100V IC = -1A high Continuous Collector Current ICM = -2A Peak Pulse Current Low Saturation Voltage Excellent hFE Characteristics up to IC = -1A Complementary NPN Type: FMMT493 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP capable (Note 4) Case: SOT23 Case Material: molded plastic, “Green” molding compound UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight 0.008 grams (approximate) • Applications • • • SOT23 High-side driver Load disconnect switch Motor drive E C C B B E Top View Device Symbol Top View Pin-Out Ordering Information (Notes 4 & 5) Part Number FMMT593TA FMMT593QTA FMMT593TC Notes: Compliance AEC-Q101 Automotive AEC-Q101 Marking 593 593 593 Reel size (inches) 7 7 13 Tape width (mm) 8 8 8 Quantity per reel 3,000 3,000 10,000 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen and Antimony free,"Green" and Lead-Free. 3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q101 qualified and are PPAP capable. Automotive, AEC-Q101 and standard products are electrically and thermally the same, except where specified. 5. For packaging details, go to our website at http://www.diodes.com Marking Information 593 FMMT593 Document number: DS33106 Rev. 5 - 2 593 = Product Type Marking Code 1 of 7 www.diodes.com January 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT593 Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Continuous Base Current Symbol VCBO VCEO VEBO IC ICM IB Value -120 -100 -7 -1 -2 -200 Unit V V V A A mA Value 500 250 197 -55 to +150 Unit mW °C/W °C/W °C Thermal Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Power Dissipation Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Operating and Storage Temperature Range Notes: (Note 6) (Note 6) (Note 7) Symbol PD RθJA RθJL TJ, TSTG 6. For a device surface mounted on 15mm X 15mm FR4 PCB with high coverage of single sided 1 oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). FMMT593 Document number: DS33106 Rev. 5 - 2 2 of 7 www.diodes.com January 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT593 Thermal Characteristics and Derating Information 0.6 VCE(sat) Max Power Dissipation (W) -IC Collector Current (A) 1 Limit 100m DC 1s 100ms 10m 10ms 1ms 15 x 15mm FR4 1oz Copper 1m 1 100µs 10 100 -VCE Collector-Emitter Voltage (V) 15 x 15mm FR4 1oz Copper 0.5 0.4 0.3 0.2 0.1 0.0 0 20 240 15 x 15mm FR4 1oz Copper 200 160 D=0.5 120 80 D=0.2 Single Pulse 40 0 100µ D=0.05 D=0.1 1m 10m 100m 1 Pulse Width (s) 10 100 1k Transient Thermal Impedance FMMT593 Document number: DS33106 Rev. 5 - 2 60 80 100 120 140 160 Temperature (°C) Derating Curve Max Power Dissipation (W) Thermal Resistance (°C/W) Safe Operating Area 40 3 of 7 www.diodes.com 15 x 15mm FR4 1oz Copper 100 10 1 0.1 100µ 1m 10m 100m 1 10 Pulse Width (s) 100 1k Pulse Power Dissipation January 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT593 Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 8) Emitter-Base Breakdown Voltage Collector Cutoff Current Emitter Cutoff Current Collector-Emitter Cut-Off Current Symbol BVCBO BVCEO BVEBO ICBO IEBO ICES Min -120 -100 -7 — — — Typ — — — — — — Max — — — -100 -100 -100 Unit V V V nA nA nA Static Forward Current Transfer Ratio (Note 8) hFE 100 100 100 50 — — — 300 — — Collector-Emitter Saturation Voltage (Note 8) VCE(sat) — — Base-Emitter Saturation Voltage (Note 8) Base-Emitter Turn-On Voltage (Note 8) VBE(sat) VBE(on) — — — — -200 -300 -1.1 -1.0 Transition Frequency fT 50 — — MHz Output Capacitance Cobo — — 5 pF Notes: mV V V Test Condition IC = -100µA IC = -1mA IE = -100µA VCB = -100V VEB = -5.6V VCES = -100V IC = -1mA, VCE = -5V IC = -250mA, VCE = -5V IC = -500mA, VCE = -5V IC = -1A, VCE = -5V IC = - 250mA, IB = -25mA IC = - 500mA, IB = -50mA IC = -500mA, IB = -50mA IC = -1mA, VCE = -5V VCE = -10V, IC = -50mA, f = 100MHz VCB = -10V, f = 1MHz 8. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%. FMMT593 Document number: DS33106 Rev. 5 - 2 4 of 7 www.diodes.com January 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT593 Typical Electrical Characteristics (@TA = +25°C, unless otherwise specified.) FMMT593 Document number: DS33106 Rev. 5 - 2 5 of 7 www.diodes.com January 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT593 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A B C H K M K1 D F J L G SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.903 1.10 1.00 K1 0.400 L 0.45 0.61 0.55 M 0.085 0.18 0.11 0° 8° α All Dimensions in mm Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. Y Z C X FMMT593 Document number: DS33106 Rev. 5 - 2 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 2.0 C 1.35 E E 6 of 7 www.diodes.com January 2013 © Diodes Incorporated A Product Line of Diodes Incorporated FMMT593 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com FMMT593 Document number: DS33106 Rev. 5 - 2 7 of 7 www.diodes.com January 2013 © Diodes Incorporated