NTE NTE30120 Super bright led indicator super purple, 3mm Datasheet

NTE30120
Super Bright LED Indicator
Super Purple, 3mm
Features:
D Low Power Consumption
D High Efficiency
D Versatile Mounting on P.C. Board or Panel
D Low Current Requirement
D Reliable and Robust
Applications:
D TV Sets
D Monitor
D Telephone
D Computer
D Circuit Board
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120mW
Peak Forward Current (1/10th Duty Cycle, 0.1ms Pulse Width), IFM . . . . . . . . . . . . . . . . . . . . 100mA
Continuous Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -35° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40° to +100°C
Lead Temperature (During Soldering, 3mm from Body, 5sec Max), TL . . . . . . . . . . . . . . . . . . +260°C
Electrical Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Luminous Intensity
Symbol
Test Conditions
Min
Typ
Max
Unit
IV
IF = 20mA
60
75
-
mcd
2 q1/2
IF = 20mA
-
25
-
deg
Peak Emission Wavelength
λP
IF = 20mA
-
400
-
nm
Dominant Emission Wavelength
λd
IF = 20mA
-
-
-
nm
Full Width at Half Max
Δλ
IF = 20mA
-
12.4
-
nm
Forward Voltage
VF
IF = 20mA
-
3.3
4.0
V
Reverse Current
IR
VR = 5V
-
-
10
μA
View Angle of Half Power
Note 1. Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE eye-response curve.
Note 2. q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Note 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents
the single wavelenght, which defines the color of the device.
Flat Denotes
Cathode
.152
(3.85)
Dia
.116 (2.94) Dia
.039
(1.0)
.208
(5.3)
1.102
(28.0)
.019 (0.5)
.100 (2.54)
.078 (2.0) Min
Similar pages