Vishay MAL209524681E3 Aluminum capacitors power long life 4 terminal snap-in Datasheet

V is h ay I n t er t ec h n o l o g y, I n c .
0 95 PLL- 4TSI
Key Benefits
•
Up to 450 V available
•
Case sizes larger than standard snap-in, 35 x 50 mm up to 45 x 100 mm
•
4-terminal snap-in for stable mounting on PC board
•
Very long useful life: 10 000 hours at 85 °C
•
Low ESR, high ripple current capability
APPLICATIONS
w w w. v i s h a y. c o m
•
Solar systems
•
Uninterruptible power supplies (UPS)
•
Motor drives
•
Wind energy systems
Datasheet is available on our web site at www.vishay.com
for 095 PLL-4TSI - http://www.vishay.com/doc?28393
pr o d uc t s h ee t
Long-Life 4-Terminal Snap-In Aluminum
Power Capacitors
C A P A C I TO R S
Aluminum Capacitors
1000 hours
400 000 hours
35 x 70
40 x 60
45 x 50
35 x 80
40 x 70
45 x 50
www.vishay.com
145
40 x 70
45 x 60
35 x 80
40 x 60
45 x 50
35 x 60
40 x 50
45 x 40
35 x 70
40 x 60
450
35 x 50
40 x 40
(Ø D x L in mm)
35 x 100
40 x 70
45 x 60
40 x 100
45 x 80
45 x 100
-
35 x 80
40 x 60
45 x 50
40 x 80
45 x 70
40 x 100
45 x 100
3
For technical questions, contact [email protected]
1.3
(5 x)
22.5
ØD
Fig.6 4-Terminal Snap-in
60°
Bottom view
60°
FOUR TERMINAL SNAP-IN
Lmax.
60°
2 ± 0.1
(4 x)
B
A
22.5 ± 0.1
dummy
VMN-PT0222-1006
Document Number: 28393
Revision: 08-Aug-08
Build Vishay into your Design
Fig.7 Mounting hole diagram
Dummy terminals (A and C) must be free from the electrical circuit
6.3 ± 1
dummy
C
60°
Case Ø D = 40 mm
17.5 ± 0.1
20 ± 0.1
Fig.5 Mounting hole diagram viewed
from component side
10 ± 0.1
1
-
Fig.4 Printed wiring
pin version
4.9 ± 0.2
L + 5 max.
4
Fig.3 Mounting hole diagram viewed
from component side
MGB267-1
1.3
(4x)
L
20 ± 0.1
3
Fig.2 Printed wiring
pin version
17.5 ± 0.1
1
2
-
45 x 100
Case Ø D = 40 mm
7.5 ± 0.1
-
2.5
450
40 x 100
45 x 70
Case Ø D = 35 mm
4.9 ± 0.2
L + 5 max.
15 ± 0.1
2
Ø D + 1 max.
420
35 x 100
40 x 80
45 x 60
40 x 100
45 x 80
45 x 100
-
Case Ø D = 35 mm
CCA976-1
L
Ø D + 1 max.
2.5
UR (V)
For technical
contact: [email protected]
DISCLAIMER All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all personswww.vishay.com
acting on its or their behalf (collectively,
“Vishay”),questions,
disclaim any
146
and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising
out of the use or application of any product described herein or
of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for
use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to
fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and
markings noted herein may be trademarks of their respective owners.
For technical questions, contact: [email protected]
35 x 80
40 x 60
35 x 70
40 x 60
820
Document Number: 28393
Revision: 08-Aug-08
35 x 70
40 x 60
45 x 50
35 x 60
40 x 50
680
35 x 60
35 x 50
560
35 x 60
45 x 40
-
35 x 50
40 x 40
35 x 50
40 x 40
470
-
420
-
400
UR (V)
AND RELEVANT NOMINAL CASE SIZES
-
350
R,U R
40/085/56
390
CR
(µF)
SELECTION CHART FOR C
3000 hours
10 000 hours
IEC 60384-4/EN130300
500 V available on request!
Climatic category IEC 60 068
Based on sectional
specification
Shelf life at 0 V, 85 °C
Useful life at 40 °C,
1.4 x IR applied
Useful life at 85 °C
Endurance test at 85 °C
- 40 °C to + 85 °C
The capacitors are marked (where possible)
with the following information:
• Rated capacitance (in µF)
• Tolerance code on rated capacitance, code letter in
accordance with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code (YYMM)
• Name of manufacturer
• Code for factory of origin
• ‘-’ sign to identify the negative terminal, visible from the top
and side of the capacitor
• Code number
• Climatic category in accordance with IEC 60068
2
Category temperature range
± 20 %
PRINTED WIRING
-
350 V to 450 V
400
350
DIMENSIONS in millimeters AND AVAILABLE FORMS
3
Rated voltage range, UR
Tolerance on CR
MARKING
• For excellent mounting stability
• Energy storage in pulse systems
Telecommunication and industrial systems
Smoothing and filtering applications
Switched mode power supplies
Renewable energy power converters
1800
2200
1500
1000
1
390 µF to 2200 µF
35 x 50
to 45 x 100
VALUE
095
•
•
•
•
APPLICATIONS
COMPLIANT
RoHS
CR
(µF)
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
2
Rated capacitance range CR
Nominal case size
(D x L in mm)
DESCRIPTION
QUICK REFERENCE DATA
096
smaller
dimensions
• Keyed polarity
• Low ESR, high ripple current capability
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large types, minimized dimensions, cylindrical
aluminum case, insulated with a blue sleeve
• Pressure relief on the side of the aluminum case
• Very long useful life: 10 000 hours at 85 °C
• Temperature range up to 85 °C
FEATURES
095 PLL-4TSI
Vishay BCcomponents
Power Long Life 4-Terminal Snap-In
4
-
Fig.1 Component outlines
095 PLL-4TSI
3
Aluminum Capacitors
Power Long Life 4-Terminal Snap-In
Revision 16-Jun-09
Aluminum Capacitors Power Long
Life 4 TerminalAluminum
Snap-In
Capacitors
Vishay BCcomponents
Vishay BCcomponents
095 PLL-4TSI
1
Similar pages