ITF FG081 Saw bandpass filter fg081 Datasheet

SAW Bandpass Filter FG081
Features
RF Bandpass Filter
Usable bandwidth of 10 MHz
No impedance matching require for operation at 200 Ω
Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm )
Balanced to Balanced Operation
RoHS Compliant
Package Dimensions
3.00±0.15
8
I
G081
3
1
6
6
2
5
4
5
1.20
7
3
4
0.75
0.60
2
8
7
1.10±0.15
3.00±0.15
1
0.60
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
1, 3
Input
5, 7
Output
2, 4, 6, 8
Case Ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-45
25
85
Storage Temperature Range
°C
-40
-
85
Power Handling Capability
dBm
-
-
-
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
1/7
SAW Bandpass Filter FG081
Specifications
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
1086.0
-
MHz
Insertion Loss (In Fc +/- 5.0 MHz)
-
3.0
4.5
dB
Amplitude Ripple (In Fc +/- 5.0 MHz)
-
0.6
1.5
dBp-p
500.0 MHz ~ 988.0 MHz
43.0
50.0
-
988.0 MHz ~ 1002.0 MHz
43.0
50.0
-
1038.0 MHz ~ 1046.0 MHz
40.0
45.0
-
1156.0 MHz ~ 1600.0 MHz
40.0
50.0
-
-
1.5
2.3
-40
25
85
℃
-
200
-
Ohms
Relative Attenuation
VSWR (In Fc +/- 5.0 MHz)
Temperature Range (Operational)
Input/Output Impedance
dB
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 4 port calibrations for balanced to balanced operation.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
3) All attenuation measurements are measured relative to insertion loss
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
2/7
SAW Bandpass Filter FG081
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
1
3
Balanced Input
2
Balanced Output
200Ω
4
200Ω
Marking Configuration
1)
I2)
G0813)
1) Pad Number 1 Index
2) Manufacturer name
3) Marking Number
* Ink or Laser Marking available
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
3/7
SAW Bandpass Filter FG081
Typical Performance ( at 25℃
℃)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
4/7
SAW Bandpass Filter FG081
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
5/7
SAW Bandpass Filter FG081
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
6/7
SAW Bandpass Filter FG081
Carrier Tape Dimensions [unit : mm]
A
3.40 ± 0.1
B
3.40 ± 0.1
C
7.25 ± 0.1
D
1.70 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
FG081
Rev. Date
2009-01-05
Rev.
NC9001-PS01
7/7
Similar pages