ETC2 D411 Accessories mounting material Datasheet

Dupline® Field- and Installationbus
Accessories
Mounting Material
Socket type D 411
11- pole socket for devices with spade plug (4.8 x 0.5 mm).
Accessories for socket type D 411
Rating
Isolation group
Material
Colour
Screw terminals
Contact spring
Retaining spring
Mounting holes
DIN-rail mounting
Approvals
Text markers
Socket cover
Hold down spring
DIN-rail
10 A/250 VAC (IEC 60664)
C 380 VAC (VDE 0110)
Noryl SE 1
Grey
11 pcs. M4 screws
Tin-plated brass
Stainless steel
2 x ∅ 3.0
EN 50022
UL, CSA
Dimensions in [mm]
D 411
Socket cover type BB 5
Cover for socket type D 411
for covering the front screw
connections of the socket.
The holes ( ∅ 5 mm) on top of
e.g. Weidmüller type SG10
BB 5
HF
FMD 411
the terminals prevent from
accidental touching, but allow
measurements without removing the socket cover.
BB 5
Specifications are subject to change without notice (03.09.99)
Material
Colour
Noryl SE1
Grey
Dimensions in [mm]
1
D 411, BB 5, HF, FMD 411, FRS 2
Mounting Material (cont.)
Hold down spring type HF
to be used with socket type
D 411 for additional fixing of
the D-housing in places with
vibrations.
HF
DIN-rail type FMD 411
Mounting rail for socket type
D 411 or H4 housing type
FRS 2
2
Stainless steel
HF mounted on module
Dupline modules, which are
snapped on FMD 411.
FMD 411
Front mounting bezel FRS 2
For front panel mounting of
D-housing Dupline modules.
Material
Type
Mounting holes
Material
EN 50022
2 x ∅3.0
Electroplated steel
Dimensions in [mm]
Front mounting cover and Dhousing snap together.
Material
Colour
Panel cutout
Glass-reinforced Noryl SE1
Grey
84.5 x 38.5 mm
Dimensions in [mm]
Specifications are subject to change without notice (03.09.99)
Similar pages