PR3001G - PR3007G 3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features · · · · · Glass Passivated Die Construction Fast Switching for High Efficiency Surge Overload Rating to 125A Peak B A Low Reverse Leakage Current A Lead Free Finish, RoHS Compliant (Note 4) C D Mechanical Data · · · · · · · · Case: DO-201AD DO-201AD Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Dim Min Max Moisture Sensitivity: Level 1 per J-STD-020C A 25.40 ¾ Terminals: Finish ¾ Tin. Plated Leads Solderable per e3 MIL-STD-202, Method 208 B 7.20 9.50 C 1.20 1.30 D 4.80 5.30 Polarity: Cathode Band Marking: Type Number All Dimensions in mm Ordering Information: See Last Page Weight: 1.12 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic PR PR PR PR PR PR PR Symbol 3001G 3002G 3003G 3004G 3005G 3006G 3007G Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IO 3.0 A IFSM 125 A Forward Voltage @ IF = 3.0A VFM 1.3 V @ TA = 25°C @ TA = 125°C IRM 5.0 100 mA Peak Reverse Current at Rated DC Blocking Voltage (Note 5) Reverse Recovery Time (Note 3) trr Typical Total Capacitance (Note 2) CT 50 pF RqJA 32 °C/W Tj, TSTG -65 to +150 °C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. 150 250 500 ns Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect. DS27003 Rev. 6 - 2 1 of 3 www.diodes.com PR3001G - PR3007G ã Diodes Incorporated IF, INSTANTANEOUS FOWRARD CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) 4 Single phase half wave Resistive or Inductive load 3 2 1 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Derating Curve 1.0 0.1 Tj = 25°C 0.01 175 200 0.6 0.8 1.0 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 Tj = 25°C f = 1 MHz CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 10 100 10 1 10 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Peak Forward Surge Current 1 100 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance 100 trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27003 Rev. 6 - 2 2 of 3 www.diodes.com PR3001G - PR3007G Ordering Information Notes: (Note 6) Device Packaging Shipping PR3001G-B DO-201AD 500/Bulk 1.2K/Tape & Reel, 13-inch PR3001G-T DO-201AD PR3002G-B DO-201AD 500/Bulk PR3002G-T DO-201AD 1.2K/Tape & Reel, 13-inch PR3003G-B DO-201AD 500/Bulk PR3003G-T DO-201AD 1.2K/Tape & Reel, 13-inch PR3004G-B DO-201AD 500/Bulk PR3004G-T DO-201AD 1.2K/Tape & Reel, 13-inch PR3005G-B DO-201AD 500/Bulk PR3005G-T DO-201AD 1.2K/Tape & Reel, 13-inch PR3006G-B DO-201AD 500/Bulk 1.2K/Tape & Reel, 13-inch PR3006G-T DO-201AD PR3007G-B DO-201AD 500/Bulk PR3007G-T DO-201AD 1.2K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS27003 Rev. 6 - 2 3 of 3 www.diodes.com PR3001G - PR3007G