DIODES ZXMN2B03E6

ZXMN2B03E6
20V SOT23-6 N-channel enhancement mode MOSFET
with low gate drive capability
Summary
RDS(on) (⍀)
ID (A)
0.040 @ VGS= 4.5V
5.4
0.055 @ VGS= 2.5V
4.6
0.075 @ VGS= 1.8V
4.0
V(BR)DSS
20
Description
This new generation trench MOSFET from Zetex features low onresistance achievable with low gate drive.
Features
D
•
Low on-resistance
•
Fast switching speed
•
Low gate drive capability
•
SOT23-6 package
G
S
Applications
•
DC-DC converters
•
Power management functions
•
Disconnect switches
•
Motor control
D
D
D
D
G
S
Ordering information
Device
Reel size
(inches)
Tape width
(mm)
Quantity per reel
7
8
3,000
ZXMN2B03E6TA
Top view
Device marking
2B3
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
1
www.zetex.com
ZXMN2B03E6
Absolute maximum ratings
Parameter
Symbol
Limit
Unit
Drain-source voltage
VDSS
20
V
Gate-source voltage
VGS
±8
V
ID
5.4
A
Continuous drain current
@ VGS= 4.5V; Tamb=25°C(b)
@ VGS= 4.5V; Tamb=70°C(b)
4.3
@ VGS= 4.5V; Tamb=25°C(a)
4.3
IDM
26
A
IS
2.8
A
Pulsed source current (body diode)(c)
ISM
26
A
Power dissipation at Tamb =25°C(a)
PD
1.1
W
8.8
mW/°C
1.7
W
13.7
mW/°C
Tj, Tstg
-55 to +150
°C
Pulsed drain current(c)
Continuous source current (body diode)(b)
Linear derating factor
PD
Power dissipation at Tamb =25°C(b)
Linear derating factor
Operating and storage temperature range
Thermal resistance
Parameter
Symbol
Limit
Unit
ambient(a)
R⍜JA
113
°C/W
Junction to ambient(b)
R⍜JA
73
°C/W
Junction to
NOTES:
(a) For a device surface mounted on 25mm x 25mm FR4 PCB with high coverage of single sided 1oz copper, in still air
conditions.
(b) For a device surface mounted on FR4 PCB measured at t ⱕ5 sec.
(c) Repetitive rating - 25mm x 25mm FR4 PCB, D=0.02, pulse width 300␮s - pulse width limited by maximum junction
temperature.
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
2
www.zetex.com
ZXMN2B03E6
Thermal characteristics
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
3
www.zetex.com
ZXMN2B03E6
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter
Symbol
Min.
Typ.
Max.
Unit
Conditions
Static
Drain-source breakdown voltage V(BR)DSS
20
V
ID= 250␮A, VGS=0V
Zero gate voltage drain current
IDSS
1
␮A
VDS= 20V, VGS=0V
Gate-body leakage
IGSS
100
nA
VGS=±8V, VDS=0V
Gate-source threshold voltage
VGS(th)
1.0
V
ID= 250␮A, VDS=VGS
Static drain-source on-state
resistance (*)
RDS(on)
0.040
⍀
VGS= 4.5V, ID= 4.3A
0.055
⍀
VGS= 2.5V, ID= 3.7A
0.075
⍀
VGS= 1.8V, ID= 3.2A
0.4
gfs
13.5
S
VDS= 10V, ID= 4.3A
Input capacitance
Ciss
1160
pF
Output capacitance
Coss
210
pF
VDS= 10V, VGS=0V
f=1MHz
Reverse transfer capacitance
Crss
136
pF
Turn-on-delay time
td(on)
4.2
ns
Rise time
tr
6.2
ns
Turn-off delay time
td(off)
33.9
ns
Fall time
tf
12.4
ns
Total gate charge
Qg
14.5
nC
Gate-source charge
Qgs
2
nC
Gate drain charge
Qgd
2.8
nC
Diode forward voltage(*)
VSD
0.67
Reverse recovery time(‡)
trr
Reverse recovery charge(‡)
Qrr
Forward transconductance(*) (‡)
Dynamic(‡)
Switching (†) (‡)
VDD= 10V, VGS= 4.5V
ID= 1A
RG ≈ 6.0⍀
VDS= 10V, VGS= 4.5V
ID= 4.3A
Source-drain diode
0.95
V
Tj=25°C, IS= 1.8A,
VGS=0V
10.8
ns
3.4
nC
Tj=25°C, IF= 2.8A,
di/dt=100A/␮s
NOTES:
(*) Measured under pulsed conditions. Pulse width ⱕ300␮s; duty cycle ⱕ2%.
(†) Switching characteristics are independent of operating junction temperature.
(‡) For design aid only, not subject to production testing.
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
4
www.zetex.com
ZXMN2B03E6
Typical characteristics
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
5
www.zetex.com
ZXMN2B03E6
Typical characteristics
Current
regulator
QG
12V
VG
QGS
50k
Same as
D.U.T
QGD
VDS
IG
D.U.T
ID
VGS
Charge
Basic gate charge waveform
Gate charge test circuit
VDS
90%
RD
VGS
VDS
RG
VCC
10%
VGS
td(on)
tr
t(on)
td(off)
tr
t(on)
Switching time waveforms
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
Switching time test circuit
6
www.zetex.com
ZXMN2B03E6
Intentionally left blank
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
7
www.zetex.com
ZXMN2B03E6
Package outline - SOT23-6
DIM
Millimeters
Min.
0.90
0.00
0.90
0.35
0.09
2.70
2.20
1.30
0.10
A
A1
A2
b
C
D
E
E1
L
e
e1
L
Inches
Max.
1.45
0.15
1.30
0.50
0.26
3.10
3.20
1.80
0.60
Min.
0.354
0.00
0.0354
0.0078
0.0035
0.1062
0.0866
0.0511
0.0039
0.95 REF
1.90 REF
0°
Max.
0.0570
0.0059
0.0511
0.0196
0.0102
0.1220
0.1181
0.0708
0.0236
0.0374 REF
0.0748 REF
30°
0°
30°
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Europe
Americas
Asia Pacific
Corporate Headquarters
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
europe.sales@zetex.com
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
usa.sales@zetex.com
Telephone: (852) 26100 611
Fax: (852) 24250 494
asia.sales@zetex.com
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
hq@zetex.com
For international sales offices visit www.zetex.com/offices
Zetex products are distributed worldwide. For details, see www.zetex.com/salesnetwork
This publication is issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or
reproduced for any purpose or form part of any order or contact or be regarded as a representation relating to the products or services concerned.
The company reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.
Issue 1 - September 2006
© Zetex Semiconductors plc 2006
8
www.zetex.com