DIODES 74LVC1G06

74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Description
Pin Assignments
The 74LVC1G06 is a single inverter gate with an open drain
(Top View)
output. The device is designed for operation with a power
supply range of 1.65V to 5.5V. The input is tolerant to 5.5V
allowing this device to be used in a mixed voltage
NC
1
A
2
5
Vcc
4
Y
environment. The device is fully specified for partial power
NEW PRODUCT
down applications using IOFF. The IOFF circuitry disables the
GND 3
output preventing damaging current backflow when the
device is powered down.
SOT25 / SOT353
The open-drain output can be
connected to other open drain outputs to implement activelow wired-OR or active-high wired-AND functions.
(Top View)
The
maximum sink current is 32 mA.
NC
1
6
Vcc
A
2
5
NC
GND
3
4
Y
Features
•
Wide Supply Voltage Range from 1.65 to 5.5V
•
± 24mA Output Drive at 3.3V
•
CMOS low power consumption
•
IOFF Supports Partial-Power-Down Mode Operation
•
Inputs accept up to 5.5V
•
ESD Protection Tested per JESD 22
DFN1410 (Note 2)
Applications
Exceeds 200-V Machine Model (A115-A)
•
•
•
•
Exceeds 2000-V Human Body Model (A114-A)
•
Latch-Up Exceeds 100mA per JESD 78, Class II
•
Range of Package Options
•
SOT25, SOT353, and DFN1410: Assembled with “Green”
Molding Compound (no Br, Sb)
•
Lead Free Finish/ RoHS Compliant (Note 1)
Notes:
Voltage Level Shifting
General Purpose Logic
Power Down Signal Isolation
Wide array of products such as.
o PCs, networking, notebooks, netbooks, PDAs
o Computer peripherals, hard drives, CD/DVD ROM
o TV, DVD, DVR, set top box
o Cell Phones, Personal Navigation / GPS
o MP3 players ,Cameras, Video Recorders
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
2. Pin 2 and pin 5 of the DFN1410 package are internally connected.
74LVC1G06
Document number: DS32272 Rev. 2 - 2
1 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Pin Descriptions
Pin Name
No connection
NC
Data Input
A
GND
Ground
Data Output Open Drain
Y
Vcc
NEW PRODUCT
Description
Supply Voltage
Logic Diagram
A
4
2
Y
Function Table
Inputs
Output
A
Y
H
L
L
Z
74LVC1G06
Document number: DS32272 Rev. 2 - 2
2 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Absolute Maximum Ratings (Note 3)
Symbol
Description
Rating
Unit
2
KV
200
V
Supply Voltage Range
-0.5 to 6.5
V
VI
Input Voltage Range
-0.5 to 6.5
V
Vo
Voltage applied to output in high impedance or IOFF state
-0.5 to 6.5
V
Vo
Voltage applied to output in high or low state
-0.3 to VCC +0.5
V
IIK
Input Clamp Current VI<0
-50
mA
IOK
Output Clamp Current
-50
mA
IO
Continuous output current
±50
mA
Continuous current through Vdd or GND
±100
mA
Operating Junction Temperature
-40 to 150
°C
Storage Temperature
-65 to 150
°C
ESD HBM
Human Body Model ESD Protection
ESD MM
Machine Model ESD Protection
NEW PRODUCT
VCC
TJ
TSTG
Notes:
3. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
74LVC1G06
Document number: DS32272 Rev. 2 - 2
3 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Recommended Operating Conditions (Note 4)
Symbol
VCC
Operating Voltage
Parameter
Min
Max
Unit
Operating
1.65
5.5
V
Data retention only
1.5
VCC = 1.65 V to 1.95 V
NEW PRODUCT
VIH
High-level Input Voltage
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
0.65 X VCC
1.7
Low-level input voltage
V
2
0.7 X VCC
VCC = 1.65 V to 1.95 V
VIL
V
0.35 X VCC
VCC = 2.3 V to 2.7 V
0.7
VCC = 3 V to 3.6 V
0.8
VCC = 4.5 V to 5.5 V
V
0.3 X VCC
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
IOL
Low-level output current
VCC = 1.65 V
4
VCC = 2.3 V
8
16
VCC = 3 V
24
VCC = 4.5 V
Δt/ΔV
TA
Notes:
mA
32
VCC = 1.8 V ± 0.15V, 2.5 V ± 0.2 V
Input transition rise or fall
VCC = 3.3 V ± 0.3 V
rate
VCC = 5 V ± 0.5 V
Operating free-air
temperature
20
10
ns/V
5
-40
85
ºC
4. Unused inputs should be held at Vcc or Ground.
74LVC1G06
Document number: DS32272 Rev. 2 - 2
4 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C)
Over recommended free-air temperature range (unless otherwise noted)
Symbol
NEW PRODUCT
VOL
Parameter
High-level Input Voltage
Test Conditions
Vcc
Min
Typ
Max
Unit
V
IOL = 100 μA
1.65V to 5.5V
0.1
IOL = 4 mA
1.65V
0.45
IOL = 8 mA
2.3V
0.3
IOL = 16 mA
IOL = 24 mA
0.4
3V
μA
0.55
IOL = 32 mA
4.5V
0.55
Input Current
VI = 5.5 V or GND
0 to 5.5 V
±5
IOZ
Z State Leakage Current
VO =0 to 5.5V
3.6V
± 10
μA
IOFF
Power Down Leakage
Current
VI or VO = 5.5V
0
± 10
μA
ICC
Supply Current
VI = 5.5V of GND
IO=0
1.65V to 5.5V
10
μA
500
μA
II
ΔICC
Ci
Additional Supply Current Input at VCC –0.6 V
3 V to 5.5V
Input Capacitance
3.3
θJA
Thermal Resistance
Junction-to-Case
θJC
Thermal Resistance
Junction-to-Case
Notes:
Vi = VCC – or GND
SOT25
SOT353
DFN1410
SOT25
SOT353
DFN1410
(Note 5)
(Note 5)
(Note 5)
(Note 5)
(Note 5)
(Note 5)
3.5
204
371
430
52
143
190
pF
o
C/W
C/W
o
C/W
o
C/W
o
C/W
o
C/W
o
5. Test condition for SOT25, SOT353, and DFN1410: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum
recommended pad layout.
74LVC1G06
Document number: DS32272 Rev. 2 - 2
5 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Switching Characteristics
Over recommended free-air temperature range, CL = 30 or 50pF (unless otherwise noted) (see Figure 1)
Vcc = 1.8 V
Vcc = 2.5 V
Vcc = 3.3 V
Vcc = 5 V
From
TO
±
0.15V
±
0.2V
±
0.3V
± 0.5V
Parameter
(Input) (OUTPUT)
Min
Max
Min Max
Min
Max
Min
Max
tpd
A
Y
1.5
6.5
1.0
4
1.0
4
1.0
3
Unit
ns
NEW PRODUCT
Operating Characteristics
TA = 25 ºC
Parameter
Cpd
Power dissipation
capacitance
74LVC1G06
Document number: DS32272 Rev. 2 - 2
Test
Conditions
Vcc = 1.8 V
Vcc = 2.5 V
Vcc = 3.3 V
Vcc = 5 V
TYP
TYP
TYP
TYP
f = 10 MHz
3
3
4
6
6 of 13
www.diodes.com
Unit
pF
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
NEW PRODUCT
Parameter Measurement Information
Inputs
Vcc
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VI
VCC
VCC
3V
VCC
tr/tf
≤2ns
≤2ns
≤2.5ns
≤2.5ns
TEST
Condition
tPLZ (see Notes D and E)
tPZL(see Notes D and F)
Vload
Vload
VM
VLOAD
CL
RL
V∆
VCC/2
VCC/2
1.5V
VCC/2
2 X VCC
2 X VCC
6V
2 X VCC
30pF
30pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
0.15V
0.15V
0.3V
0.3V
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz
C. The inputs are measured one at a time with one transition per measurement.
D. For the open drain device tPLZ and tPZL are the same as tPD
E. tPZL is measured at VM.
F. tPLZ is measured at VOL +V∆
74LVC1G06
Document number: DS32272 Rev. 2 - 2
7 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Ordering Information
NEW PRODUCT
74LVC1G 06 XXX - 7
Logic Device
Function
Package
74 : Logic Prefix
LVC : 1.65 to 5.5V
Family
1G : One gate
06 : Inverter Buffer
With Open Drain
W5 : SOT25
SE : SOT353
FZ4 : DFN1410
Device
74LVC1G06W5-7
74LVC1G06SE-7
74LVC1G06FZ4-7
Notes:
Package
Code
W5
SE
FZ4
Packaging
(Note 6)
SOT25
SOT353
DFN1410
Packing
7 : Tape & Reel
7” Tape and Reel
Quantity
Part Number Suffix
3000/Tape & Reel
-7
3000/Tape & Reel
-7
5000/Tape & Reel
-7
6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
74LVC1G06
Document number: DS32272 Rev. 2 - 2
8 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Marking Information
(1) SOT25 and SOT353
(Top View)
4
7
5
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
NEW PRODUCT
XX Y W X
1
2
3
Part Number
74LVC1G06W5
74LVC1G06SE
Package
SOT25
SOT353
Identification Code
UM
UM
(2) DFN1410
(Top View)
XX
YWX
Part Number
74LVC1G06FZ4
74LVC1G06
Document number: DS32272 Rev. 2 - 2
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
Package
DFN1410
9 of 13
www.diodes.com
Identification Code
UM
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Package Outline Dimensions (All Dimensions in mm)
NEW PRODUCT
(1) Package Type: SOT25
(2) Package Type: SOT353
6x-0.42
CL
0.10/0.30
C
L
0.65Bsc.
0.25/0.40
C
L
1.8/2.2
74LVC1G06
Document number: DS32272 Rev. 2 - 2
0.1/0.22
Detail"A"
0.9/1.0
0/0.1
1.10Max.
0.25
0.40/0.45
Gauge Plane
Land Pattern Recommendation
(unit:mm) Top View
°
PIN 1
0°/8
C
L
6x-0.60
2x-0.65
1.15/1.35
2.0/2.2
C
L
1.9
1.3
"A"
10 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Package Outline Dimensions (Continued)
1.35/1.45
0.550
6x-0.25
2X-
NEW PRODUCT
C
Side View
6x-0.35
Seating Plane
0.25 A
0.08 C
0.13Typ.
0.40Max.
0.10 C
6x-
0/0.05
(3) Package Type: DFN1410
A
0.50Typ.
2X-
(Pin #1 ID)
X
45¢
. 1x
C0
0.075¡ 0Ó.030
6x-0.25/0.35
0.95/1.05
B
4x-0.50Typ.
Land Pattern Recommendation
(mm)
Top View
0.25 B
0.10(4x)
6x-0.15/0.25
0.10
C A B
Bottom View
74LVC1G06
Document number: DS32272 Rev. 2 - 2
11 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
Taping Orientation (Note 7)
NEW PRODUCT
For DFN1410
Notes:
7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
74LVC1G06
Document number: DS32272 Rev. 2 - 2
12 of 13
www.diodes.com
October 2010
© Diodes Incorporated
74LVC1G06
SINGLE INVERTER BUFFER/DRIVER WITH
OPEN DRAIN OUTPUT
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
74LVC1G06
Document number: DS32272 Rev. 2 - 2
13 of 13
www.diodes.com
October 2010
© Diodes Incorporated