TPD6V8LP 85W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Please click here to visit our online spice models database. Features • • • • • • • Mechanical Data • • Planar Die Construction Ultra-Small Leadless Surface Mount Package Unidirectional Ideally Suited for Automated Assembly Processes Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability • • • • • • Case: DFN1006-2 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminal Connections: Cathode Dot Terminals: Finish ⎯ NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.001 grams (approximate) Bottom View Maximum Ratings @TA = 25°C unless otherwise specified Characteristic Peak Pulse Power (tp = 8 x 20 μs) (Note 4) (See figure 6) Forward Voltage (Note 3) @ IF = 10mA Peak Pulse Current (tp = 8 x 20 μs) (Note 4) (See figure 6) Human Body Model Machine Model ESD Rating IEC61000-4-2 Air Discharge IEC61000-4-2 Contact Discharge Symbol Ppk VF Ipp Vpp Value 85 0.9 4.5 8 400 25 8 Unit W V A kV V kV kV Thermal Characteristics Characteristic Power Dissipation (Note 4) Thermal Resistance, Junction to Ambient Air (Note 4) Symbol PD RθJA Value 250 500 Unit mW °C/W Operating and Storage Temperature Range TJ, TSTG -65 to +150 °C Symbol VRWM Value 5 6.4 7.2 0.5 19 65 Unit V Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Reverse Standoff Voltage Breakdown Voltage @ IT = 5mA (Note 3) Minimum Maximum Maximum Reverse Leakage @ VRWM (Note 3) Maximum Clamping Voltage @ Ipp = 4.5A (tp = 8x20μs) (See figure 6) Typical Total Capacitance (VR = 0V, f = 1MHz) Notes: VBR IR VC CT V μA V pF 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Short duration pulse test used to minimize self-heating effect. 4. Part mounted on FR-4 PC board with recommended pad layout, as per http://www.diodes.com/datasheets/ap02001.pdf. TPD6V8LP Document number: DS30914 Rev. 6 - 2 1 of 3 www.diodes.com July 2008 © Diodes Incorporated TPD6V8LP 300 PD, POWER DISSIPATION (mW) Note 4 250 200 150 100 50 0 25 50 75 100 125 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Derating Curve 150 0 0.3 0.9 1.2 1.5 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR , INSTANTANEOUS REVERSE CURRENT (uA) IR, INSTANTANEOUS REVERSE CURRENT (mA) 0 TA = -65°C 10 TA = 0°C TA = 25°C T A = 85°C TA = 150°C VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Breakdown Characteristics VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 4 Typical Low Current Reverse Characteristics IPP, PEAK PULSE CURRENT (%Ipp) CT, TOTAL CAPACITANCE (pF) f = 1MHz 1 VR, REVERSE VOLTAGE (V) Fig. 5 Typical Total Capacitance vs. Reverse Voltage TPD6V8LP Document number: DS30914 Rev. 6 - 2 2 of 3 www.diodes.com July 2008 © Diodes Incorporated TPD6V8LP Ordering Information (Note 5) Part Number TPD6V8LP-7 Notes: Case DFN1006-2 Packaging 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information 9C = Product Type Marking Code, Dot Denotes Cathode Side Package Outline Dimensions A A1 D R E b L DFN1006-2 Dim Min Max Typ A 0.47 0.53 0.50 A1 0 0.05 0.03 b 0.45 0.55 0.50 D 0.95 1.075 1.00 E 0.55 0.675 0.60 e 0.40 L 0.20 0.30 0.25 R 0.05 0.15 0.10 All Dimensions in mm e Suggested Pad Layout C Dimensions Value (in mm) Z 1.1 G 0.3 X 0.7 Y 0.4 C 0.7 X Y G Z IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. TPD6V8LP Document number: DS30914 Rev. 6 - 2 3 of 3 www.diodes.com July 2008 © Diodes Incorporated