Half-pitch DIP Switch A6H Ultra-low Profile, Half-pitch, Surface-mounting DIP Switch • Very low profile of 1.55 mm • Half-pitch (1.27-mm) design allows greater compactness and reduces mounting space by 63%. (compared with conventional models) • Washable, seal tape models available • Embossed taping models available • RoHS Compliant Ordering Information Part numbers Standard models Tube packaging Quantity per tube Number of poles Models with seal tape Embossed taping packaging Tube packaging Quantity per reel Embossed taping packaging Quantity per tube Quantity per reel 2 A6H-2101 125 A6H-2101-P A6H-2102 125 A6H-2102-P 4 A6H-4101 75 A6H-4101-P A6H-4102 75 A6H-4102-P 6 A6H-6101 54 A6H-6101-P A6H-6102 54 A6H-6102-P 8 A6H-8101 40 A6H-8101-P A6H-8102 40 A6H-8102-P 10 A6H-0101 33 A6H-0101-P A6H-0102 33 A6H-0102-P 4,000 4,000 Note: 1. Small reels of 500 pieces are also available. Order “-PM” version instead of “-P”. 2. Switches cannot be water washed. Specifications ■ Characteristics Switching capacity 25 mA at 24 VDC Minimum permissible load 10 μA at 3.5 VDC Contact resistance 200 mΩ max. Insulation resistance 100 MΩ min. (at 100 VDC) Dielectric strength 300 VAC for 1 min between terminals Operating force 30 to 500 gf ( 0.3 to 4.9 N) Vibration resistance Malfunction durability 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Malfunction durability 300 m/s2 min. Service life Mechanical 1,000 operations min. Electrical 1,000 operations min. Ambient operating temperature –20 to 70°C at 60% RH max. (with no icing or condensation) Ambient operating humidity 35% to 95% (at 5 to 35°C) 0.06 g (2 poles), 0.09 g (4 poles), 0.12 g (6 poles), 0.15 g (8 poles), 0.18 g (10 poles) Weight Note: Data shown are of initial value. Half-pitch DIP Switch A6H 295 Dimensions Note: 1. All units are in millimeters unless otherwise indicated. 2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. ■ Standard A6H-@101 A6H-@101-P Dimensions of PCB Pad (Top View) 1.27×(P-1)±0.1 A±0.2 4.9 4.5±0.2 Standard 7.4 With seal tape Seal tape (t=0.05) 0.76 1.45 ■ With Seal Tape 0.1 1.27 0.6 No. of poles 0.6 6.7 1.27×(P-1) A6H-@102 A6H-@102-P 6.7 P: Pole numbers Model Dimension A Standard With seal tape 2 A6H-2101 A6H-2102 3.77 4 A6H-4101 A6H-4102 6.31 6 A6H-6101 A6H-6102 8.85 8 A6H-8101 A6H-8102 11.39 10 A6H-0101 A6H-0102 13.93 Internal connections (top view) o ON 1 2 296 Half-pitch DIP Switch A6H 9 10 P: Pole numbers MEMO Half-pitch DIP Switch A6H All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC Global - http://www.omron.com USA - http://www.components.omron.com 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. X303-E-1 11/10 Half-pitch DIP Switch A6H Specifications subject to change without notice Printed in USA