SPICE MODELS: RS3A RS3B RS3D RS3G RS3J RS3K RS3M RS3AB RS3BB RS3DB RS3GB RS3JB RS3KB RS3MB RS3A/B - RS3M/B 3.0A SURFACE MOUNT FAST RECOVERY RECTIFIER Features · · · · · Glass Passivated Die Construction Fast Recovery Time for High Efficiency Surge Overload Rating to 100A Peak B Ideally Suited for Automatic Assembly Dim C Mechanical Data · · Case: SMB, SMC D Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Polarity: Cathode Band or Cathode Notch J H Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 e3 Marking Information: See Page 3 G E SMC Max Min Max A 3.30 3.94 5.59 6.22 B 4.06 4.57 6.60 7.11 C 1.96 2.21 2.75 3.18 D 0.15 0.31 0.15 0.31 E 5.00 5.59 7.75 8.13 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.00 2.62 2.00 2.62 Lead Free Finish/RoHS Compliant (Note 4) A SMB Min All Dimensions in mm AB, BB, DB, GB, JB, KB, MB Suffix Designates SMB Package A, B, D, G, J, K, M Suffix Designates SMC Package Ordering Information: See Page 3 Weight: SMB 0.093 grams (approx) SMC 0.21 grams (approx) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Symbol RS3 A/AB RS3 B/BB RS3 D/DB RS3 G/GB RS3 J/JB RS3 K/KB RS3 M/MB Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IFSM 100 A Forward Voltage VFM 1.3 V IRM 5.0 250 mA Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage (Note 5) @ TT = 75°C @ IF = 3.0A @ TA = 25°C @ TA = 125°C Maximum Recovery Time (Note 3) Typical Total Capacitance (Note 2) Typical Thermal Resistance Junction to Terminal (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. trr 150 250 500 ns CT 50 pF RqJT 25 °C/W Tj, TSTG -65 to +150 °C Thermal resistance: junction to terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pad as heat sink. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Reverse recovery test conditions: IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect. DS15005 Rev. 8 - 2 1 of 3 www.diodes.com RS3A/B - RS3M/B ã Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 3.0 2.5 2.0 1.5 1.0 0.5 0 10 1.0 0.1 Tj = 25°C 0.01 25 50 75 100 125 150 175 0 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 0.4 1000 Single Half-Sine-Wave 100 Tj = 125°C 100 80 60 10 40 Tj = 25°C 1.0 20 0.1 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS15005 Rev. 8 - 2 2 of 3 www.diodes.com RS3A/B - RS3M/B Ordering Information (Note 6) Device* Packaging Shipping RS3x-13-F RS3xB-13-F SMC SMB 3000/Tape & Reel 3000/Tape & Reel * x = Device type, e.g. RS3A-13-F (SMC package); RS3AB-13-F (SMB package). Notes: 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW RS3X(B) RS3X = Product type marking code, ex: RS3A (SMC package) RS3XB = Product type marking code, ex: RS3AB (SMB package) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS15005 Rev. 8 - 2 3 of 3 www.diodes.com RS3A/B - RS3M/B