Fuji EDS10-46C Moving coil type alarming indicator Datasheet

MOVING COIL TYPE ALARMING INDICATOR
DATA SHEET
PAK
The moving coil type alarming indicator is designed to
receive various input signals such as FC series signals. DC
voltage or current, and signals from themocouples or
resistance bulbs.
FEATURES
1. Direct connection of input signals.
2. High input impedance (1MΩ for 1 to 5V DC input).
No circuit adjusting resistor is required for thermocouple
input.
3. Compact and lightweight.
Input resistance and allowable input signal source resistance:
SPECIFICATIONS
Input signal:
FC series signal
A; 1 to 5V DC
B; 4 to 20mA DC
DC current
D; 0 to 100µA ....... 200mA DC
DC voltage
E; 0 to 10mV ........ 5V DC
Thermocouple
F; 0 to 10mV DC or more
(with reference junction compensator)
(Upper limit overshoot burnout circuit is available on request)
G; 10mV DC span or more
(with reference junction compensator)
(Upper limit overshoot burnout circuit is available on request)
Resistance bulb
H; JPt100Ω
50°C span or more, 3-wire type
W; Pt100Ω
50°C span or more, 3-wire type
Ring tube (resistance span 14Ω)
Slide resistant (resistance span 100Ω)
J; 3-wire type
K; 2-wire type (with adjusting resistor)
Opening angle transmitter (resistance
span 100Ω)
L; 3-wire type (zero point and span
adjustable)
Input
resistance
Allowable input signal
source resistance
1 to 5V
1MΩ
2kΩ or less
Others
40kΩ to 1MΩ
100Ω or less
4 to 20mA
5Ω
Others
1 to 100Ω
Input signal
Voltage
–––
Current
Thermocouple
Resistance
40 to 600kΩ
–––
–––
100Ω or less
50Ω or less when burnout
circuit
6Ω or less per wire
± 1.0% of full scale
100mm
Within 3 sec (time required for stabilizing
the indicator pointer within ± 1.5% after
applying input corresponding to 2/3 (approx.) of full scale)
Power supply:
100V ± 10% AC, 50/60Hz
*200V ± 10% AC, 50/60Hz, or
+15%
*24V –10% AC, 50/60Hz
Power consumption:
Approx. 4.5VA max.
Ambient temperature:
–10 to +50°C
Ambient humidity:
30 to 90%RH
Enclosure:
Steel case
External dimensions (H × W × D):
48 × 144 × 275mm
Mass{weight}:
Approx. 2kg
Finish color:
Munsell 7.5BG 3.2/0.8 or equivalent
Allowance:
Scale length:
Response time:
EDS10-46c
Date
Feb. 28, 1991
PAK
Alarm device:
Upper limit (H or A), lower limit (L or B)
Upper and lower limits (K or C with one
common contact)
H, L, K; Excitation alarm
A, B, C; Non-excitation alarm
Setting accuracy; ± 1.0%
Contact; ON alarm (OFF alarm is available
on request)
Contact capacity; 100V AC 0.3A/24V DC
0.2A (resistance load)
Alarm indicator lamp (available on request); Alarm signal displayed with LED
mounted on indicator panel
CODE SYMBOLS
1 2 3 4 5 6 7 8
PAK
9 10
Description
2
Input signal
1 to 5V DC
4 to 20mA DC
0 to 100µA.....200mA DC
0 to 10mV.....5V DC
0 to 10mV DC or more
(with reference junction compensator)
10mV DC span or more
(with reference junction compensator)
Resistance bulb JPt100Ω
50°C span or more, 3-wire type
Resistance bulb Pt100Ω
50°C span or more, 3-wire type
Ring tube, slide resistant, 3-wire type
Ring tube, slide resistant, 2-wire type
(with circuit adjusting resistor)
Opening angle indicator (resistance
100Ω, zero point and span adjustable)
Other inputs
Alarm device
Upper limit
Lower limit
Excitation alarm
Upper and
(ON alarm)
lower limits
Upper limit
Lower limit
Non-excitation alarm
Upper and
(ON alarm)
lower limits
A
B
D
E
F
G
H
W
J
K
L
* Z
H
L
K
*A
*B
*C
Power supply
24V AC 50/60Hz
100V AC 50/60Hz
200V AC 50/60Hz
* 1
3
* 5
Application
For general use
For connection zener barrier:
Specify “3” only when zener barrier
(PWZB3 or PMZB4) is to be connected
and thermocouple or resistance bulb
is used as input source.
0
3
1
* 2
0
* 1
Mounting method
Horizontal mounting
Vertical mounting
Alarm indicator lamp
None
Provided
Notes: Symbols of resistance bulbs are as follows.
JPt100 Previous JIS standard
Pt100 New JIS standard
Scope of delivery : Indicator and mounting bracket
Mounting method:
Panel flush mounting
Standard;
Horizontal mounting on vertical panel
Non-standard;
Tilted mounting, vertical mounting
Specify ∠α for tilted mounting
OUTLINE DIAGRAM (Unit : mm)
CONNECTION DIAGRAMS
PAK
ORDERING INFORMATION
1.
2.
3.
4.
5.
Product name
Code symbols
Input
Scale
Alarm device and alarm indicator lamp
(whether required or not)
6. Power supply
7. Application
8. Other necessary information
Caution on Safety
• Asterisked (*) items; Non-standard
*Before using this product, be sure to read its instruction manual in advance.
Head Office
Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome,
Shinagawa-ku, Tokyo 141-0032, Japan
http://www.fesys.co.jp/eng
Instrumentation Div.
International Sales Dept.
No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan
Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187
http://www.fic-net.jp/eng
Information in this catalog is subject to change without notice.
Printed in Japan
Similar pages