DIODES 74LVC1G04

74LVC1G04
SINGLE INVERTER GATE
Description
Pin Assignments
The 74LVC1G04 is a single inverter gate with a standard
(Top View)
totem pole output. The device is designed for operation with a
power supply range of 1.65V to 5.5V. The inputs are tolerant
NC
5 Vcc
1
to 5.5V allowing this device to be used in a mixed voltage
environment. The device is fully specified for partial power
A 2
NEW PRODUCT
down applications using IOFF. The IOFF circuitry disables the
output preventing damaging current backflow when the device
4 Y
GND 3
is powered down.
SOT25 / SOT353
The gate performs the positive Boolean function:
Y=A
Features
Applications
•
Wide Supply Voltage Range from 1.65 to 5.5V
•
Voltage Level Shifting
•
± 24mA Output Drive at 3.3V
•
General Purpose Logic
•
CMOS low power consumption
•
Power Down Signal Isolation
•
IOFF Supports Partial-Power-Down Mode Operation
•
Wide array of products such as.
•
Inputs accept up to 5.5V
•
PCs, networking, notebooks, netbooks, PDAs
•
ESD Protection Exceeds JESD 22
•
Computer peripherals, hard drives, CD/DVD ROM
•
200-V Machine Model (A115-A)
•
TV, DVD, DVR, set top box
•
2000-V Human Body Model (A114-A)
•
Cell Phones, Personal Navigation / GPS
•
Latch-Up Exceeds 100mA per JESD 78, Class II
•
MP3 players ,Cameras, Video Recorders
•
Range of Package Options
•
Direct Interface with TTL Levels
•
SOT25 and SOT353: Assembled with “Green” Molding
•
Lead Free Finish/ RoHS Compliant (Note 1)
Compound (no Br, Sb)
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
74LVC1G04
Document number: DS32198 Rev. 1 - 2
1 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
NEW PRODUCT
Pin Descriptions
Pin Name
Pin NO.
NC
1
No Connection
A
2
Data Input
GND
3
Ground
Y
4
Data Output
Vcc
5
Supply Voltage
Description
Logic Diagram
A
4
2
Y
Function Table
Inputs
Output
A
Y
H
L
L
H
74LVC1G04
Document number: DS32198 Rev. 1 - 2
2 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
Absolute Maximum Ratings (Note 2)
Symbol
Rating
Unit
Human Body Model ESD Protection
Machine Model ESD Protection
Supply Voltage Range
2
200
-0.5 to 6.5
KV
V
V
VI
Input Voltage Range
-0.5 to 6.5
V
Vo
Voltage applied to output in high impedance or IOFF state
-0.5 to 6.5
V
Vo
Voltage applied to output in high or low state.
-0.3 to VCC +0.5
V
IIK
Input Clamp Current VI<0
-50
mA
IOK
Output Clamp Current
-50
mA
IO
Continuous output current
±50
mA
Continuous current through Vdd or GND
±100
mA
Operating Junction Temperature
-40 to 150
°C
Storage Temperature
-65 to 150
°C
ESD HBM
ESD MM
NEW PRODUCT
VCC
TJ
TSTG
Notes:
Description
2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
74LVC1G04
Document number: DS32198 Rev. 1 - 2
3 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
Recommended Operating Conditions (Note 3)
Symbol
VCC
Operating Voltage
Parameter
Operating
Data retention only
VCC = 1.65 V to 1.95 V
High-level Input Voltage
NEW PRODUCT
VIH
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
Min
1.65
1.5
Max
5.5
Unit
V
V
0.65 X VCC
1.7
V
2
0.7 X VCC
VCC = 1.65 V to 1.95 V
0.35 X VCC
VCC = 2.3 V to 2.7 V
0.7
VCC = 3 V to 3.6 V
0.8
VIL
Low-level input voltage
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
VCC = 4.5 V to 5.5 V
IOH
Low-level output current
IOL
Δt/ΔV
TA
Notes:
High-level output current
0.3 X VCC
VCC = 1.65 V
-4
VCC = 2.3 V
-8
VCC = 3 V
-16
-24
VCC = 4.5 V
-32
VCC = 1.65 V
4
VCC = 2.3 V
8
VCC = 3 V
16
24
VCC = 4.5 V
32
VCC = 1.8 V ± 0.15V, 2.5 V ± 0.2 V
Input transition rise or fall
VCC = 3.3 V ± 0.3 V
rate
VCC = 5 V ± 0.5 V
Operating free-air
temperature
V
mA
mA
20
10
ns/V
5
-40
85
ºC
3. Unused inputs should be held at Vcc or Ground.
74LVC1G04
Document number: DS32198 Rev. 1 - 2
4 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C)
Over recommended free-air temperature range (unless otherwise noted)
NEW PRODUCT
Symbol
VOH
Parameter
High Level Output
Voltage
Test Conditions
High-level Input
Voltage
1.65V to 5.5V
IOH = -4mA
1.65V
1.2
IOH = -8mA
2.3V
1.9
IOH = -16mA
3V
Input Current
IOL = 4mA
1.65V
0.45
IOL = 8mA
2.3V
0.3
V
0.4
0.55
IOL = 32mA
4.5
0.55
VI = 5.5 V or GND
0 to 5.5V
±5
μA
± 10
μA
10
μA
500
μA
0
VI = 5.5V of GND
IO=0
ΔICC
Additional Supply
Current
Input at VCC –0.6 V 3 V to 5.5V
Ci
Input Capacitance
Notes:
3.8
3V
Supply Current
Thermal Resistance
Junction-to-Case
2.3
0.1
ICC
θJC
V
2.4
1.65V to 5.5V
IOL = 16mA
Unit
VCC – 0.1
IOL = 100μA
Power Down Leakage VI or VO = 5.5V
Current
Thermal Resistance
Junction-to-Ambient
Max
4.5V
IOFF
θJA
Typ.
IOH = -32mA
IOL = 24mA
II
Min
IOH = -100μA
IOH = -24mA
VOL
Vcc
Vi = VCC – or GND
SOT25
SOT353
SOT25
SOT353
1.65V to 5.5V
3.3
(Note 4)
(Note 4)
(Note 4)
(Note 4)
4
204
371
52
143
pF
o
C/W
C/W
o
C/W
o
C/W
o
4. Test condition for SOT25 and SOT353: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended
pad layout.
74LVC1G04
Document number: DS32198 Rev. 1 - 2
5 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
Switching Characteristics
Over recommended free-air temperature range, CL = 15pF (see Figure 1)
Vcc = 1.8 V
Vcc = 2.5 V
From
TO
±
0.15V
± 0.2V
Parameter
(Input)
(OUTPUT)
Min
Max
Min Max
A
NEW PRODUCT
tpd
2.0
Y
6.4
1.0
4.2
Vcc = 3.3 V
± 0.3V
Min
Max
Vcc = 5 V
± 0.5V
Min
Max
0.7
0.7
3.3
Over recommended free-air temperature range, CL = 30 or 50pF as noted (see Figure 2)
Vcc = 1.8 V
Vcc = 2.5 V
Vcc = 3.3 V
From
TO
±
0.15V
±
0.2V
± 0.3V
Parameter
(Input)
(OUTPUT)
Min
Max
Min Max
Min
Max
A
tpd
Y
3.0
7.5
1.4
5.2
1.0
4.2
3.1
ns
Vcc = 5 V
± 0.5V
Min
Max
1.0
Unit
3.7
Unit
ns
Operating Characteristics
TA = 25 ºC
Parameter
Cpd
Power dissipation
capacitance
74LVC1G04
Document number: DS32198 Rev. 1 - 2
Test
Conditions
Vcc = 1.8 V
Vcc = 2.5 V
Vcc = 3.3 V
Vcc = 5 V
TYP
TYP
TYP
TYP
f = 10 MHz
16
18
18
20
6 of 11
www.diodes.com
Unit
pF
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
NEW PRODUCT
Parameter Measurement Information
Inputs
Vcc
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VI
VCC
VCC
3V
VCC
tr/tf
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VM
CL
RL
VCC/2
VCC/2
1.5V
VCC/2
15pF
15pF
15pF
15pF
1MΩ
1MΩ
1MΩ
1MΩ
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. tPLH and tPHL are the same as tPD.
74LVC1G04
Document number: DS32198 Rev. 1 - 2
7 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
NEW PRODUCT
Parameter Measurement Information (Continued)
Inputs
Vcc
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VI
VCC
VCC
3V
VCC
tr/tf
≤2ns
≤2ns
≤2.5ns
≤2.5ns
VM
CL
RL
VCC/2
VCC/2
1.5V
VCC/2
30pF
30pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 2. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. tPLH and tPHL are the same as tPD.
74LVC1G04
Document number: DS32198 Rev. 1 - 2
8 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
Ordering Information
Logic Device
Function
Package
74 : Logic Prefix
LVC : 1.65 to 5.5V
Family
1G : One gate
04 : 1-Input
Inverter Gate
W5 : SOT25
SE : SOT353
Device
74LVC1G04W5-7
74LVC1G04SE-7
Notes:
Package
Code
W5
SE
Packing
7 : Tape & Reel
7” Tape and Reel
Quantity
Part Number Suffix
3000/Tape & Reel
-7
3000/Tape & Reel
-7
Packaging
(Note 5)
SOT25
SOT353
5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Marking Information
(Top View)
5
4
7
NEW PRODUCT
74LVC1G 04 XX - 7
XX Y W X
1
2
Part Number
74LVC1G04W5
74LVC1G04SE
74LVC1G04
Document number: DS32198 Rev. 1 - 2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
Package
SOT25
SOT353
9 of 11
www.diodes.com
Identification Code
UU
UU
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
Package Outline Dimensions (All Dimensions in mm)
NEW PRODUCT
(1) Package Type: SOT25
(2) Package Type: SOT353
6x-0.42
C
L
0.10/0.30
C
L
PIN 1
0.40/0.45
0.65Bsc.
0.25/0.40
C
L
1.8/2.2
74LVC1G04
Document number: DS32198 Rev. 1 - 2
0.1/0.22
Detail"A"
0.9/1.0
0/0.1
1.10Max.
Gauge Plane
Land Pattern Recommendation
(unit:mm) Top View
0°
/8° 0.25
C
L
6x-0.60
2x-0.65
1.15/1.35
2.0/2.2
C
L
1.9
1.3
"A"
10 of 11
www.diodes.com
May 2010
© Diodes Incorporated
74LVC1G04
SINGLE INVERTER GATE
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
74LVC1G04
Document number: DS32198 Rev. 1 - 2
11 of 11
www.diodes.com
May 2010
© Diodes Incorporated