Previous Datasheet Index Next Data Sheet DISCRETE POWER DIODES and THYRISTORS DATA BOOK To Order Previous Datasheet Index Next Data Sheet Bulletin I2084/B SD400C..C SERIES Hockey Puk Version STANDARD RECOVERY DIODES Features 800A Wide current range High voltage ratings up to 2400V High surge current capabilities Diffused junction Hockey Puk version Case style DO-200AA Typical Applications Converters Power supplies Machine tool controls High power drives case style DO-200AA Medium traction applications Major Ratings and Characteristics Parameters SD400C..C Units 800 A 55 °C 1435 A 25 °C @ 50Hz 8250 A @ 60Hz 8640 A @ 50Hz 340 KA2s @ 60Hz 311 KA2s VRRM range 400 to 2400 V TJ - 40 to 190 °C IF(AV) @ Ths IF(RMS) @ Ths IFSM I2t To Order PreviousSeries Datasheet SD400C..C Index Next Data Sheet ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Code peak reverse voltage V repetitive peak rev. voltage V @ TJ = TJ max. 04 400 500 08 800 900 12 1200 1300 16 1600 1700 20 2000 2100 24 2400 2500 Type number SD400C..C mA 15 Forward Conduction Parameter SD400C..C Units 800(425) A 180° conduction, half sine wave 55(85) °C Double side (single side) cooled I F(RMS) Max. RMS forward current 1435 A @ 25°C heatsink temperature double side cooled I FSM Max. peak, one-cycle forward, 8250 non-repetitive surge current 8640 I F(AV) Max. average forward current @ Heatsink temperature t = 10ms No voltage t = 8.3ms reapplied t = 10ms 100% VRRM 7265 t = 8.3ms reapplied Sinusoidal halfwave, 340 t = 10ms No voltage Initial TJ = TJ max. t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied 6940 2 I t 2 Maximum I t for fusing A 311 241 KA2s 220 I 2 √t Maximum I2√t for fusing V F(TO)1 Low level value of threshold 3400 KA2√s voltage rf1 Low level value of forward V 0.83 (I > π x IF(AV)),TJ = TJ max. 0.55 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. slope resistance rf2 V FM mΩ High level value of forward slope resistance Max. forward voltage drop t = 0.1 to 10ms, no voltage reapplied (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 0.80 voltage V F(TO)2 High level value of threshold Conditions (I > π x IF(AV)),TJ = TJ max. 0.53 1.86 V To Order Ipk= 1930A, TJ = TJ max, tp = 10ms sinusoidal wave Previous Datasheet Index Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current NextSD400C..C Data SheetSeries Fig. 6 - Forward Power Loss Characteristics To Order Fig. 8 - Maximum Non-Repetitive Surge Current Previous Datasheet SD400C..C Series Index Next Data Sheet Fig. 9 - Forward Voltage Drop Characteristics Fig. 10 - Thermal Impedance ZthJC Characteristics To Order Previous Datasheet Index NextSD400C..C Data Sheet Series Thermal and Mechanical Specifications Parameter SD400C..C TJ Max. junction operating temperature range -40 to 190 Tstg Max. storage temperature range -55 to 200 RthJ-hs Max. thermal resistance, junction F wt Units Conditions °C 0.163 DC operation single side cooled K/W to heatsink 0.073 Mounting force, ± 10% 4900 N (500) (Kg) 70 g Approximate weight Case style DC operation double side cooled DO-200AA See Outline Table ∆RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction Rectangular conduction Single Side Double Side Units Conditions K/W TJ = TJ max. Single Side Double Side 180° 0.017 0.018 0.011 0.012 120° 0.020 0.020 0.020 0.020 90° 0.025 0.025 0.027 0.027 60° 0.037 0.036 0.038 0.038 30° 0.064 0.062 0.065 0.062 Ordering Information Table Device Code SD 40 0 C 24 C 1 2 3 4 5 6 1 - Diode 2 3 - Essential part number 0 = standard recovery 4 5 - C = Ceramic Puk Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - C = Puk Case DO-200AA To Order PreviousSeries Datasheet SD400C..C Index Next Data Sheet 4 2 ( 1.65 ) D IA . M A X . Outline Table 3.5(0.14) ± 0.1(0.004) DIA. NOM.x 1.8 (0.07) DEEP MIN. BOTH ENDS 1 4 .4 (0.57 ) TWO PLACES 0.3 (0.01) MIN. BOTH ENDS 38 (1.50) DIA. MAX. 1 3.7 (0 .54) 19(0.75) DIA. MAX. Case Style DO-200AA All dimensions in millimeters (inches) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics To Order