SPICE MODELS: KBP005G KBP01G KBP02G KBP04G KBP06G KBP08G KBP10G KBP005G - KBP10G 1.5A GLASS PASSIVATED BRIDGE RECTIFIER Features · · · · · · Glass Passivated Die Construction · Lead Free Finish, RoHS Compliant (Note 2) High Case Dielectric Strength of 1500VRMS KBP Low Reverse Leakage Current Surge Overload Rating to 40A Peak Ideal for Printed Circuit Board Applications L UL Listed Under Recognized Component Index, File Number E94661 A J K M _ + Mechanical Data · · Case: KBP · Terminals: Finish – Matte Tin. Solderable per MIL-STD-202, Method 208 · · · · Polarity: As Marked on Body N C H Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 B Min Max A 14.25 14.75 B 10.20 10.60 2.29 Typical C D 14.25 14.73 E 3.56 4.06 G 0.76 0.86 H 1.17 1.42 2.8 X 45° Chamfer J D G Dim P K 0.80 1.10 L 3.35 3.65 3° Nominal M Marking: Type Number 2° Nominal N E Mounting Position: Any 0.30 P Approx. Weight: 1.52 grams 0.64 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 105°C Symbol KBP 005G KBP 01G KBP 02G KBP 04G KBP 06G KBP 08G KBP 10G Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.5 A Non-Repetitive Peak Forward Surge Current, 8.3 ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 40 A Forward Voltage per element VFM 1.1 V IRM 5.0 500 µA CT 20 pF Typical Thermal Resistance, junction to case RqJC 18 °C/W Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.5A @TC = 25°C @ TC = 125°C Typical Total Capacitance per (Note 1) Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. 3. Unit mounted on 300 x 300 x 1.6mm aluminum plate heat sink. DS21203 Rev. 11 - 2 1 of 3 www.diodes.com KBP005G-KBP10G ã Diodes Incorporated 2.0 10 IF, INSTANTANEOUS FWD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) Note 3 1.5 Lead Case 1.0 Ambient 0.5 TJ = 150°C TJ = 25°C 1.0 0.1 0 0 0 50 100 150 0 0.4 0.6 100 50 1.0 1.2 1.4 Tj = 25°C f = 1MHz Tj = 150°C Single Half Sine Wave (JEDEC Method) CT, CAPACITANCE (pF) 40 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics T, TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 0.2 30 20 10 10 0 1 1 10 100 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Peak Forward Surge Current IR, INSTANTANEOUS REVERSE CURRENT (mA) 10,000 1000 Tj = 150ºC 100 Tj = 125ºC 10 Tj = 100ºC 1.0 Tj = 25ºC 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics DS21203 Rev. 11 - 2 2 of 3 www.diodes.com KBP005G-KBP10G Ordering Information Notes: (Note 4) Device Packaging Shipping KBP005G-7 KBP 35 pieces per Tube KBP01G-7 KBP 35 pieces per Tube KBP02G-7 KBP 35 pieces per Tube KBP04G-7 KBP 35 pieces per Tube KBP06G-7 KBP 35 pieces per Tube KBP08G-7 KBP 35 pieces per Tube KBP10G-7 KBP 35 pieces per Tube 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS21203 Rev. 11 - 2 3 of 3 www.diodes.com KBP005G-KBP10G