GREATECS IS15ABDP4B Programmable lcd switch Datasheet

LCD Switches
Programmable LCD Switches
IS Series
Enhanced LED Illumination:
» Broad and even light diffusion
» Consistent backlighting
» Low energy consumption
Programmable LC Display
Variety of LED Backlighting
Rubber Dome
Epoxy Sealed Straight PC Terminals
IS15ABCP4CF
IS15ABFP4RGB
with Yellow LCD
Mode
with RGB LED Option
and Black & White
LCD Mode
RGB backlighting provides infinite color availability.
Programmable to display graphics, alphanumeric characters and animated sequences.
Integrated liquid crystal display provides wide viewing angle with high contrast and clarity.
Wide viewing area 15.0mm x 10.8mm (horizontal x vertical) at 36 x 24 pixels.
Dome gives crisp tactile feedback to positively indicate circuit transfer.
High reliability and long life of one million actuations minimum.
Epoxy sealed terminals prevent entry of solder flux and other contaminants.
Optional accessories available to enhance panel design and simplify production process.
STANDARD LED BACKLIGHTING
Part Number
Switch Description
LCD Mode
IS15AACP4CF
SPST
Momentary ON
Gold Contacts
Straight PC Terminals
Yellow
STN Positive
LED Color
*
Red/Green
* Simultaneous illumination of both colors achieves third color.
SUPER BRIGHT LED BACKLIGHTING
LCD Switches
Part Number
Switch Description
LCD Mode
LED Color
IS15ABCP4CF
Yellow
STN Positive
Red/Green
IS15ABCP4E
Yellow
STN Positive
Yellow
IS15ABCP4EF
Yellow
STN Positive
Yellow/Green
SPST
Momentary ON
Gold Contacts
Straight PC Terminals
Blue
STN Negative
Yellow
IS15ABDP4EG
Blue
STN Negative
Yellow/Blue
IS15ABDP4B
Blue
STN Negative
White
IS15ABFP4B
Black & White
FSTN Positive
White
IS15ABDP4E
*
*
*
* Simultaneous illumination of both colors achieves third color.
RGB LED BACKLIGHTING
Part Number
Switch Description
LCD Mode
IS15ABFP4RGB
SPST
Momentary ON
Gold Contacts
Straight PC Terminals
Black & White
FSTN Positive
LED Color
Red/Green/Blue
*
* Simultaneous RGB illumination achieves infinite colors.
K01
[email protected]
www.greatecs.com
LCD Switches
Programmable LCD Switches
IS Series
GENERAL SPECIFICATIONS OF SWITCH
Circuit
SPST normally open
Electrical Capacity (Resistive Load)
100mA@12VDC
Contact Resistance
200 milliohms max. @ 20 mV 10mA
Insulation Resistance
100 megaohms min. @ 100VDC
Dielectric Strength
125VAC for 1 minute min.
Mechanical Endurance
1,000,000 operations min.
Electrical Endurance
1,000,000 operations min.
Operating Force
2.2 ± 0.5 Newtons
Total Travel
1.8mm
Operating Temperature Range
0°C ~ +40°; contact factory for wide temperature range options
Storage Temperature Range
-10°C ~ +60°C; contact factory for wide temperature range options
GENERAL SPECIFICATIONS OF DISPLAY
Display Operation Mode
STN positive, STN negative, FSTN positive
Display Condition
Transflective with built-in LED backlight
Viewing Angle
Adjustable
Driving Method
1/24 duty. 1/5 bias (built-in driving circuit)
Viewing Area
15.0mm x 10.8mm (horizontal x vertical)
Pixel Format
36 x 24 dots (horizontal x vertical)
Pixel Size
0.36mm x 0.36mm (horizontal x vertical)
Backlight LED
Single color: yellow, white
Bicolor: red/green, yellow/green, yellow/blue
RGB: red/green/blue
TYPICAL SWITCH DIMENSIONS WITH SINGLE OR BICOLOR LEDS
15.0
17.78
See Standoff
Detail
14.01
Part No.
13
12
12.5
13.5
9.33
20.59
12.5
7.62
10.8
13x 0.8 ~ 1.0 Dia
17.78
13
11
9
2
8
6
4
7
5
3
4
17.78
12
10
7.62
1
17.78
3
0.6 Typ
16.0
10.5
23.13
2.5
3.2
12.5
2.8
1.25 Typ
12.7
1.25 Typ
LCD Switches
See Pixel Detail
2x 0.9 Dia
Landless
2.5
2.5
12.7
Terminal numbers are not on the switch
Footprint
TYPICAL SWITCH DIMENSIONS WITH RGB LED
See Pixel Detail
15.0
17.78
See Standoff
Detail
14.01
Part No.
14
13.5
9.33
10.8
10
13.75
13.75
8
6
4
2
4
20.59
7.62
17.78
12
13
1
14x 0.8 ~ 1.0 Dia
17.78
14
13
2
11
9
7.62
7
1
5
3
1.25 Typ
2x 0.9 Dia
Landless
0.6 Typ
16.0
10.5
23.13
PIXEL DETAIL
2.5
3.2
12.5
2.8
12.7
2.5
2.5
Terminal numbers are not on the switch
12.7
Footprint
STANDOFF DETAIL
0.6
0.36 Sq
0.03 Typ
17.78
3
1.25 Typ
0.3
0.75 Dia
1.8 Dia
[email protected]
www.greatecs.com
K02
LCD Switches
Programmable LCD Switches
IS Series
OPTIONAL ACCESSORIES: AT9704-02YC SOCKET FOR SINGLE & BICOLOR LED MODELS
Materials: Base - Glass Fiber Reinforced PBT Terminals - Brass/Beryllium Copper
13
11
9
12.5
7.62
20.5
7
12.5
0.51 DiaTyp
5
3
12
10
2
8
6
4
7.62
1
13x 0.8~ 1.0 Dia
1.25Typ
1.25 Typ
3.9
6.7
23.0
12.7
2.5
2.5
12.7
OPTIONAL ACCESSORIES: AT548 PANEL MOUNT HOUSING
Materials: Polyamide
Panel Thickness Range:
1.5 ~ 4.0 mm
23.7
31.5
27.5
29.0
12.6
23.2
2.0
27.6
17.7
23.7
OPTIONAL ACCESSORIES: AT542 COUPLER
Material: PBT
1.0
1.0
16.0
4.2
16.0
LCD Switches
4.2
Top
Side
0.97Typ
Bottom
DEMONSTRATION KIT
Demonstration Kits 1 und 2 are shipped with a LCD Switch or LC Display, USB cable for PC connection, User Guide and CD with software. Optional Battery Box is available.
IS-DEM KIT-1: Switch Demonstration Kit
IS-DEM KIT-2: Display Demonstration Kit
The demonstration kit is used for displaying bitmaps, up to 64, that have been created
on your PC via the Easy Editor software and USB cable (supplied). This kit contains a LCD
Switch or LC Display with red/green bicolor LED.
IS-DEM KIT-1
IS-DEM KIT-2
DEVELOPMENT KIT
All development kits have been preprogrammed and designed to work with software.
IS-DEV KIT-1: One programmable LCD display module and two PCB mounted tact switches,
with flash memory, power and programming connections.
IS-DEV KIT-2: Two LCD programmable pushbutton switches on a PC board with flash memory, power and programming connections.
IS-DEV KIT-1
K03
[email protected]
IS-DEV KIT 2
This development kit consists of 2 LCD Switches with red/green bicolor LED. The kit is
designed to show how 2 switches interact together to accomplish numerous tasks.
www.greatecs.com
Similar pages