Hitachi HCGWA2H562Y Aluminum electrolytic capacitor Datasheet

ALUMINUM ELECTROLYTIC CAPACITORS
HCGW Series
(Warranty of 2,000 hours at 85°C)
Product Specifications
Specifications
Item
Temperature range –10°C ~ +85˚C
Rated current 350 ~ 500V.DC
Capacitance tolerance ±20%(20℃,120Hz)
This current must be less than or equal to a smaller value of I=0.01CV and 7mA (20℃, 5 minutes).
Leakage current
(I: Leakage current, C: µF), V: Rated voltage (VDC)
Dissipation factor Must be less than or equal to 0.70 (20℃, 120Hz)
Features
• Product primarily designed for circuits requiring large
energy momentarily like those for the uninterruptible power
supply (UPS) and X-ray power supply
• Capacitance improved by 40%, comparison with the
HCGF6 model (smallest model)
No abnormality must be found when 2,000 VDC is applied between
Withstand voltage the terminal block and the mount fixture (to be attached to the case
which has been coated doubly with an armored sleeve).
Load at high
temperature
No load at high
temperature
The requirements shown in the following table must be met under conditions that allowable
ripple currents are superposed at 85℃ within a range not exceeding a rated voltage,
voltage is applied for 2,000 hours, then the temperature is lowered again to 20℃.
Requirements
Characteristic
Rate of change
Within ±15% of the initial value
Dissipation factor value Within 175% of the initial standard
Leakage current
Within the initial standard value
The requirements of the above table (shown in the column Load at High Temperature ) must be
met under conditions that the capacitor is left at 85℃ for 500 hours with no voltage applied, the
temperature is lowered again to 20℃ and preprocessing for tests (4.4 in JIS C5102) is performed.
Related standard JIS C 5101-4
Ripple current correction coefficient
Product code : (Example) 450V 22,000 µF±20%
HCGWA
Type of series
2W
223
Y
Code for rated voltage Code for capacitance Code for fixture
(JIS symbol)
(The last digit 3 indicates
the number of 0s.)
( Y is the standard code but I
may be used instead. N is used
when no fixture is required.)
Ambient temperature (°C)
40
60
70
85
Correction coefficient
1.0
0.75
0.62
0.37
Frequency (Hz)
120
300
1k
10K≦
Correction coefficient
1.0
1.1
1.3
1.4
*When using this capacitor at a frequency below 120 Hz, contact us in advance.
(F)
Case code
(This code is required when multiple kinds of cases
are available. For standard products, only the first
letter is used. For example, F is used for F24R.)
*( ) Case code in parentheses : If two types of shape exist for the same rating,
enter the first English letter of case code.
Attachment of legs
• See page 43 for shapes and dimensions.
• Product names in the Standard Units Rating Table correspond to the
attachment legs for Type Y (Type I for ø36 only), but Type I
attachment legs may be used (Shape Code = I).
• If attachment legs are not necessary, enter "N" for the attachment leg
shape code.
• Attachment legs will be delivered separately.
Standard value and case size
Rated Voltage Capacitance Case size
tand Ripple current
Case code
(Arms)
øDXL(mm)
V. DC
(µF)
20°C,120Hz 40°C,120Hz
077·155 E16R
350V(2V) 13000
0.70
20.7
090·157 F16R
17000
0.70
25.4
077·195 E20R
18000
0.70
26.8
077·235 E24R
22000
0.70
32.1
101·175 G18R
24000
0.70
33.8
090·196 F20R
25000
0.70
33.6
090·236 F24R
0.70
40.4
31000
101·195 G20R
0.70
38.1
101·237 G24R
39000
0.70
46.2
Rated Voltage Capacitance Case size
tand Ripple current
Case code
(Arms)
V. DC
øDXL(mm)
(µF)
20°C,120Hz 40°C,120Hz
077·155 E16R
450V(2W)
9500
0.70
17.9
077·195 E20R
12000
0.70
22.1
090·157 F16R
13000
0.70
21.0
077·235 E24R
15000
0.70
27.3
090·196 F20R
17000
0.70
27.9
101·175 G18R
18000
0.70
27.9
090·236 F24R
0.70
34.3
22000
101·195 G20R
0.70
32.2
101·237 G24R
27000
0.70
38.4
Hitachi AIC Inc.
Rated Voltage Capacitance Case size
tand Ripple current
Case code
(Arms)
øDXL(mm)
V. DC
(µF)
20°C,120Hz 40°C,120Hz
077·155 E16R
400V(2G) 11000
0.70
19.2
077·195 E20R
14000
0.70
23.9
077·235 E24R
0.70
28.0
16000
090·157 F16R
0.70
24.8
090·196 F20R
20000
0.70
30.3
101·175 G18R
22000
0.70
30.8
090·236 F24R
0.70
36.6
25000
101·195 G20R
0.70
34.5
101·237 G24R
32000
0.70
41.8
Product name
HCGWA2V133Y
HCGWA2V173Y
HCGWA2V183Y
HCGWA2V223Y
HCGWA2V243Y
HCGWA2V253Y
HCGWA2V313YF
HCGWA2V313YG
HCGWA2V393Y
Rated Voltage Capacitance Case size
tand Ripple current
Case code
(Arms)
V. DC
øDXL(mm)
(µF)
20°C,120Hz 40°C,120Hz
077·155 E16R
500V(2H)
5600
0.70
13.7
077·195 E20R
0.70
18.2
8200
090·157 F16R
0.70
17.7
077·235 E24R
9500
0.70
21.7
090·196 F20R
11000
0.70
22.4
101·175 G18R
12000
0.70
22.7
090·236 F24R
0.70
27.4
14000
101·195 G20R
0.70
25.6
101·237 G24R
16000
0.70
29.6
Product name
HCGWA2W952Y
HCGWA2W123Y
HCGWA2W133Y
HCGWA2W153Y
HCGWA2W173Y
HCGWA2W183Y
HCGWA2W223YF
HCGWA2W223YG
HCGWA2W273Y
44
Product name
HCGWA2G113Y
HCGWA2G143Y
HCGWA2G163YE
HCGWA2G163YF
HCGWA2G203Y
HCGWA2G223Y
HCGWA2G253YF
HCGWA2G253YG
HCGWA2G323Y
Product name
HCGWA2H562Y
HCGWA2H822YE
HCGWA2H822YF
HCGWA2H952Y
HCGWA2H113Y
HCGWA2H123Y
HCGWA2H143YF
HCGWA2H143YG
HCGWA2H163Y
Similar pages