Intersil ACS280K Radiation hardened 9-bit odd/ even parity generator checker Datasheet

ACS280MS
Radiation Hardened 9-Bit Odd/
Even Parity Generator Checker
January 1996
Features
Pinouts
• Devices QML Qualified in Accordance with MIL-PRF-38535
• Detailed Electrical and Screening Requirements are Contained in
SMD# 5962-96708 and Intersil’ QM Plan
• 1.25 Micron Radiation Hardened SOS CMOS
• Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >300K RAD (Si)
• Single Event Upset (SEU) Immunity: <1 x 10-10 Errors/Bit/Day
(Typ)
• SEU LET Threshold . . . . . . . . . . . . . . . . . . . . . . . >100 MEV-cm2/mg
• Dose Rate Upset . . . . . . . . . . . . . . . . >1011 RAD (Si)/s, 20ns Pulse
• Dose Rate Survivability . . . . . . . . . . . >1012 RAD (Si)/s, 20ns Pulse
• Latch-Up Free Under Any Conditions
• Military Temperature Range . . . . . . . . . . . . . . . . . . -55oC to +125oC
• Significant Power Reduction Compared to ALSTTL Logic
• DC Operating Voltage Range . . . . . . . . . . . . . . . . . . . . 4.5V to 5.5V
• Input Logic Levels
- VIL = 30% of VCC Max
- VIH = 70% of VCC Min
• Input Current ≤ 1µA at VOL, VOH
• Fast Propagation Delay . . . . . . . . . . . . . . . . 23ns (Max), 15ns (Typ)
Description
The Intersil ACS280MS is a Radiation Hardened 9-bit odd/even parity
generator checker device. Both odd and even parity outputs are available
for generating or checking parity for words up to 9 bits long. Even parity
is indicated (EVEN output high) when an even number of data inputs are
high. Odd parity is indicated (ODD output high) when an odd number of
data inputs are high. Parity checking for larger words can be accomplished by tying EVEN output to any input of an additional ACS280MS.
14 PIN CERAMIC DUAL-IN-LINE
MIL-STD-1835 DESIGNATOR, CDIP2-T14,
LEAD FINISH C
TOP VIEW
I6 1
14 VCC
I7 2
13 I5
NC 3
12 I4
I8 4
11 I3
EVEN 5
10 I2
ODD 6
9 I1
GND 7
8 I0
14 PIN CERAMIC FLATPACK
MIL-STD-1835 DESIGNATOR, CDFP3-F14
LEAD FINISH C
TOP VIEW
I6
1
14
VCC
I7
2
13
I5
NC
3
12
I4
I8
4
11
I3
EVEN
5
10
I2
ODD
6
9
I1
GND
7
8
I0
The ACS280MS utilizes advanced CMOS/SOS technology to achieve
high-speed operation. This device is a member of a radiation hardened,
high-speed, CMOS/SOS Logic Family.
The ACS280MS is supplied in a 14 lead Ceramic Flatpack (K suffix) or a
Ceramic Dual-In-Line Package (D suffix).
Ordering Information
PART NUMBER
TEMPERATURE RANGE
5962F9670801VCC
-55oC
5962F9670801VXC
-55oC
SCREENING LEVEL
PACKAGE
to
+125oC
MIL-PRF-38535 Class V
14 Lead SBDIP
to
+125oC
MIL-PRF-38535 Class V
14 Lead Ceramic Flatpack
ACS280D/Sample
25oC
Sample
14 Lead SBDIP
ACS280K/Sample
25oC
Sample
14 Lead Ceramic Flatpack
ACS280HMSR
25oC
Die
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1
Spec Number
File Number
518819
3568.1
ACS280MS
Functional Diagram
I8 (4)
I7 (2)
I6 (1)
ÂE (5)
I5 (13)
I4 (12)
I3 (11)
ÂO (6)
I2 (10)
I1 (9)
I0 (8)
NC = 3
VDD = 14
GND = 7
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate
and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site http://www.intersil.com
Spec Number
2
518819
ACS280MS
Die Characteristics
DIE DIMENSIONS
88 mils x 88 mils
2.24mm x 2.24mm
METALLIZATION:
Type: AlSi
Metal 1 Thickness: 7.125kÅ ±1.125kÅ
Metal 2 Thickness: 9kÅ ±1kÅ
GLASSIVATION:
Type: SiO2
Thickness: 8kÅ ±1kÅ
WORST CASE CURRENT DENSITY:
<2.0 x 105 A/cm2
BOND PAD SIZE:
> 4.3 mils x 4.3 mils
> 110µm x 110µm
Metallization Mask Layout
(13) I5
(14) VCC
(1) I6
(2) I7
ACS280MS
(12) I4
NC (3)
(11) I3
I8 (4)
NC
NC
(10) I2
I1 (9)
I0 (8)
GND (7)
ODD (6)
EVEN (5)
Spec Number
3
518819
Similar pages