MPS MP6205DN 3.3v/5v, single-channel 500ma current-limited power distribution switch Datasheet

MP6205
3.3V/5V, Single-Channel 500mA
Current-Limited Power Distribution Switch
The Future of Analog IC Technology
DESCRIPTION
FEATURES
The MP6205 Power Distribution Switch features
internal current limiting to prevent damage to host
devices due to faulty load conditions. The MP6205
Analog switch features 90mΩ on-resistance and
operates from 2.7V to 5.5V input. It is available with
a guaranteed current limit, making it ideal for load
switching applications. The MP6205 has built-in
protection for both over current and increased
thermal stress. For over current, the device will limit
the current by changing to a constant current mode.
•
•
•
•
•
•
•
•
•
•
•
•
As the temperature increases as a result of short
circuit, the device will shut off. The device will
recover once the device temperature reduces to
approx 120°C.
500mA Continuous Current
Accurate Current Limit
2.7V to 5.5V Supply Range
140uA Quiescent Current
90mΩ MOSFET
Thermal-Shutdown Protection
Under-Voltage Lockout
8ms FLAG Deglitch Time
No FLAG Glitch During Power Up
Reverse Current Blocking
QFN8, MSOP8E, SOIC8E Packages
UL Recognized: E322138
APPLICATIONS
•
•
•
•
The MP6205 is available in QFN8, MSOP8E,
SOIC8E packages.
Smartphone and PDA
Portable GPS Device
Set-top-box
USB Power Distribution
“MPS” and “The Future of Analog IC Technology” are Trademarks of Monolithic
Power Systems, Inc.
TYPICAL APPLICATION
+5V
1 GND
MP6205
2, 3 IN
4
OFF ON
EN
OUT
6, 7, 8
To VBUS
USB Ports
FLAG 5
SINGLE-CHANNEL
UL Recognized Component
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
1
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
ORDERING INFORMATION
Part Number* Enable
Maximum
Switch Continuous
Load Current
Maximum
Short-Circuit
Current
@ TA=25°C
Package
1100mA
MSOP8E
QFN8
(2mm x
3mm)
SOIC8E
MP6205DH
Active
High
MP6205DD
Single
500mA
MP6205DN
Top
Marking
Temperature
6205D
–40°C to +85°C
7CYW
MP6205DN
* For Tape & Reel, add suffix –Z (eg. MP6205D_–Z). For RoHS Compliant Packaging, add suffix –LF. (eg.
MP6205D_–LF–Z)
PACKAGE REFERENCE
GND
1
TOP VIEW
TOP VIEW
TOP VIEW
8
OUT
GND
1
8
IN
2
7
OUT
IN
2
7
IN
3
6
OUT
IN
3
6
EN
4
5
FLAG
EN
4
5
EXPOSED PAD
ON BACKSIDE
CONNECT TO GND
MSOP8E
1
8
N/C
OUT
IN
2
7
N/C
OUT
IN
3
6
OUT
FLAG
EN
4
5
FLAG
EXPOSED PAD
ON BACKSIDE
CONNECT TO GND
EXPOSED PAD
ON BACKSIDE
CONNECT TO GND
QFN8 (2mm x 3mm)
ABSOLUTE MAXIMUM RATINGS (1)
IN .................................................-0.3V to +6.0V
EN, FLAG, OUT to GND ..............-0.3V to +6.0V
Junction Temperature ...............................150°C
Lead Temperature ....................................260°C
Storage Temperature............... –65°C to +150°C
Operating Temperature.............. –40°C to +85°C
MP6205 Rev. 0. 92
9/23/2009
GND
N/C
Thermal Resistance
SOIC8E
(2)
θJA
θJC
MSOP8E .................................55 ...... 12 ... °C/W
QFN8 (2mm x 3mm) ...............55 ...... 12 ... °C/W
SOIC8E ...................................50 ...... 10 ... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) Measured on JESD51-7 4-layer PCB.
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
2
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
ELECTRICAL CHARACTERISTICS (3)
VIN=5V, TA=+25°C, unless otherwise noted.
Parameter
Condition
IN Voltage Range
Supply Current
Shutdown Current
Off Switch Leakage
Current Limit
Typ
2.7
Single Channel
Device Disable, VOUT=float, VIN=5.5V
Device Disable, VIN=5.5V
140
1
1
550
Trip Current
Under-voltage Lockout
Under-voltage Hysteresis
FET On Resistance
EN Input Logic High Voltage
EN Input Logic Low Voltage
FLAG Output Logic Low Voltage
FLAG Output High Leakage
Current
Thermal Shutdown
Thermal Shutdown Hysteresis
Current Ramp (slew rate≤100A/s) on
Output
Rising Edge
250
90
ISINK=5mA
VIN=VFLAG=5.5V
Turn Off Time, Toff (5)
CL=100μF, RL=11Ω
FLAG Deglitch Time
EN Input Leakage
Reverse Leakage Current
1.95
Max
Units
5.5
160
1100
V
μA
μA
μA
mA
1.6
A
2.65
0.8
0.4
V
mV
mΩ
V
V
V
1
μA
0.5
0.5
3
°C
°C
ms
ms
ms
ms
ms
10
ms
15
ms
μA
μA
130
2
Turn On Time, Ton (5)
(4)
1.2
IOUT=100mA and-40°C<TA< 85°C
VIN=5.5V, CL=1uF, RL=11Ω
VIN=2.7V, CL=1uF, RL=11Ω
VIN=5.5V, CL=1uF, RL=11Ω
VIN=2.7V, CL=1uF, RL=11Ω
CL=100μF, RL=11Ω
VOUT Rising Time, Tr (4)
VOUT Falling Time, Tf
Min
140
20
0.9
1.7
4
OUT=5.5V, IN=GND
8
1
0.2
NOTE:
3) Production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization.
4) Measured from 10% to 90%.
5) Measured from (50%) EN signal to (90%) output signal.
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
3
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
PIN FUNCTIONS
Pin #
MSOP
Pin #
SOIC
Pin #
QFN
Name
1
1
1
GND,
Exposed Pad
2, 3
2, 3
2, 3
IN
Input Voltage. Accepts 2.7V to 5.5V input.
4
4
4
EN
Enable Input. Active High.
5
5
5
FLAG
IN-to-OUT Over-current, active-low output flag. Open-Drain.
6, 7, 8
6
6, 7
OUT
Power-Distribution Switch Output.
-
7, 8
8
N/C
Description
Ground. Connect exposed pad to GND plane for optimal thermal
performance
TYPICAL PERFORMANCE CHARACTERISTICS
TA = +25ºC, unless otherwise noted.
OUTX
RL
tf
tr
CL
VO(OUTX)
90%
10%
90%
10%
TEST CIRCUIT
50%
50%
50%
VI(ENX)
50%
VI(ENX)
toff
ton
VO(OUTX)
90%
ton
VO(OUTX)
10%
toff
90%
10%
VOLTAGE WAVEFORMS
Figure 1—Test Circuit and Voltage Waveforms
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
4
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
TYPICAL PERFORMANCE CHARACTERISTICS
VIN=5.5V, CL = 2.2µF, TA = +25ºC, unless otherwise noted.
Supply Current, Output Enabled
vs. Input Voltage
0.9
160
3
0.8
140
0.7
120
0.6
100
TURN OFF DELAY (ms)
2.5
2
1.5
1
0.5
0
2.5
3
3.5
4
4.5
5
5.5
0.5
60
0.3
40
0.2
20
0.1
0
6
80
0.4
0
2.5
3
INPUT VOLTAGE (V)
4
4.5
5
5.5
6
2.5
VIN=5V, IO=0.1A
110
100
90
80
2.5
3
3.5
4
4.5
5
5.5
6
TRIP CURRENT (A)
CURRENT LIMIT (A)
0.9
0.85
80
70
60
50
40
30
20
10
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
0.75
2.5
Current Limit Response Time
vs. Peak Current
45
40
1.3
35
1.2
30
25
1.1
20
1
15
10
0.9
0.8
6
OUTPUT CURRENT (A)
1.4
0.95
5.5
90
Threshold Trip Current vs.
Input Voltage
1
5
VEN=5V
120
VEN=5V
4.5
VEN=5V, IOUT=0.5A
INPUT VOLTAGE (V)
1.05
4
Input to Output Voltage vs.
Load Current
130
Current Limit
vs. Input Voltage
3.5
Static Drain-Source On-State
Resistance vs. Input Voltage
140
15 30 45 60 75 90
3
INPUT VOLTAGE (V)
INPUT VOLTAGE (V)
Static Drain-Source On-State
Resistance Variation vs.
Ambient Temperature
30
25
20
15
10
5
0
-5
-10
-15
-20
-25
-30
-45 -30 -15 0
3.5
INPUT TO OUTPUT VOLTAGE (mV)
TURN ON DELAY (ms)
VEN=5V
3.5
5
0.8
3
3.5
4
4.5
5
5.5
INPUT VOLTAGE (V)
MP6205 Rev. 0. 92
9/23/2009
6
2
2.5 3
3.5
4 4.5
5
INPUT VOLTAGE (V)
5.5
6
0
0
1 2
3 4
5 6
7 8
9 10
PEAK CURRENT (A)
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
5
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=5.5V, CL = 2.2µF, TA = +25ºC, unless otherwise noted.
VOUT
2V/div
VOUT
2V/div
EN
2V/div
EN
5V/div
EN
5V/div
VOUT
2V/div
1s/div
VOUT
2V/div
EN
2V/div
EN
2V/div
Flag
5V/div
VOUT
2V/div
IOUT
2A/div
IOUT
0.2A/div
1ms/div
4ms/div
Threshold Trip Current with
Ramped Load
on Enabled Device
EN
5V/div
VOUT
2V/div
Flag
2V/div
IOUT
0.5A/div
IOUT
0.5A/div
4ms/div
MP6205 Rev. 0. 92
9/23/2009
Short Circuit Current,
Device Enabled into Short
Ramped Load
on Enabled Device
IOUT
0.2A/div
2ms/div
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
2ms/div
6
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
FUNCTION BLOCK DIAGRAM
+
UVLO
Vref
-IN
Current
Sense
-- -- --
OUT
--
--
--
--
Charge
Pump
-Logic
---
--
--
EN
AMP
+
FLAG
Deglitch
Thermal
Sense
--
--
GND
Figure 2—Functional Block Diagram
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
7
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
DETAILED DESCRIPTION
Over Current
When the load exceeds trip current (minimum
threshold current triggering constant-current
mode) or a short is present, MP6205 switches
into to a constant-current mode (current limit
value). MP6205 will be shutdown only if the
overcurrent condition stays long enough to
trigger thermal protection.
Thermal Protection
The purpose of thermal protection is to prevent
damage in the IC by allowing exceptive current to
flow and heating the junction. The die
temperature is internally monitored until the
thermal limit is reached. Once this temperature is
reached, the switch will turn off and allow the
chip to cool. The switch has a built-in hysteresis.
Trigger overcurrent protection for different
overload conditions occurring in applications:
Under-voltage Lockout (UVLO)
This circuit is used to monitor the input voltage to
ensure that the MP6205 is operating correctly.
This UVLO circuit also ensures that there is no
operation until the input voltage reaches the
minimum spec.
1) The output has been shorted or overloaded
before the device is enabled or input applied.
MP6205 detects the short or overload and
immediately switches into a constant-current
mode.
2) A short or an overload occurs after the device
is enabled. After the current-limit circuit has
been tripped (reached the trip current
threshold), the device switches into constantcurrent mode. However, high current may
flow for a short period of time before the
current-limit circuit can react.
Enable
The logic pin disables the chip to reduce the
supply current. The device will operate once the
enable signal reaches the appropriate level. The
input is compatible with both COMS and TTL.
3) Output current has been gradually increased
beyond the recommended operating current.
The load current rises until the trip current
threshold is reached or until the thermal limit
of the device is exceeded. The MP6205 is
capable of delivering current up to the trip
current threshold without damaging the
device. Once the trip threshold has been
reached, the device switches into its
constant-current mode.
Flag Response
The FLAG pin is an open drain configuration.
This FAULT will report a fail mode after an 8ms
deglitch timeout. This is used to ensure that no
false fault signals are reported. This internal
deglitch circuit eliminates the need for extend
components. The FLAG pin is not deglitched
during an over temp. or a voltage lockout.
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
8
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
APPLICATION INFORMATION
Power-Supply Considerations
Over 10μF capacitor between IN and GND is
recommended. This precaution reduces powersupply transients that may cause ringing on the
input and improves the immunity of the device to
short-circuit transients.
In order to achieve smaller output load transient,
placing a high-value electrolytic capacitor on the
output pin(s) is recommended when the output
load is heavy.
+5V
1 GND
MP6205
2, 3 IN
4
OFF ON
EN
OUT
6, 7, 8
To VBUS
USB Ports
FLAG 5
SINGLE-CHANNEL
Figure 3—Application Circuit
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
9
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
PACKAGE INFORMATION
MSOP8E (EXPOSED PAD)
0.087(2.20)
0.099(2.50)
0.114(2.90)
0.122(3.10)
5
8
0.114(2.90)
0.122(3.10)
PIN 1 ID
(NOTE 5)
0.187(4.75)
0.199(5.05)
0.062(1.58)
0.074(1.88)
Exposed Pad
0.010(0.25)
0.014(0.35)
4
1
0.0256(0.65)BSC
BOTTOM VIEW
TOP VIEW
GAUGE PLANE
0.010(0.25)
0.030(0.75)
0.037(0.95)
0.043(1.10)MAX
SEATING PLANE
0.002(0.05)
0.006(0.15)
FRONT VIEW
NOTE:
0.181(4.60)
0.040(1.00)
0.016(0.40)
0.004(0.10)
0.008(0.20)
SIDE VIEW
0.100(2.54)
0.075(1.90)
0o-6o
0.016(0.40)
0.026(0.65)
1) CONTROL DIMENSION IS IN INCHES. DIMENSION IN BRACKET IS
IN MILLIMETERS.
2) PACKAGE LENGTH DOES NOT INCLUDE MOLD FLASH,
PROTRUSION OR GATE BURR.
3) PACKAGE WIDTH DOES NOT INCLUDE INTERLEAD FLASH OR
PROTRUSION.
4) LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING)
SHALL BE 0.004" INCHES MAX.
5) PIN 1 IDENTIFICATION HAS HALF OR FULL CIRCLE OPTION.
6) DRAWING MEETS JEDEC MO-187, VARIATION AA-T.
7) DRAWING IS NOT TO SCALE.
0.0256(0.65)BSC
RECOMMENDED LAND PATTERN
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
10
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
QFN8 (2mm x 3mm)
2.90
3.10
PIN 1 ID
MARKING
0.30
0.50
0.18
0.30
1.90
2.10
PIN 1 ID
INDEX AREA
1.65
1.85
8
PIN 1 ID
SEE DETAIL A
1
1.50
1.70
0.50
BSC
4
5
TOP VIEW
BOTTOM VIEW
PIN 1 ID OPTION A
0.30x45” TYP.
0.80
1.00
PIN 1 ID OPTION B
R0.20 TYP.
0.20 REF
0.00
0.05
SIDE VIEW
DETAIL A
2.90
0.70
NOTE:
1.70
1) ALL DIMENSIONS ARE IN MILLIMETERS.
2) EXPOSED PADDLE SIZE DOES NOT INCLUDE MOLD FLASH.
3) LEAD COPLANARITY SHALL BE 0.10 MILLIMETER MAX.
4) DRAWING CONFORMS TO JEDEC MO-229, VARIATION VCED-2.
5) DRAWING IS NOT TO SCALE.
0.25
1.60
0.50
RECOMMENDED LAND PATTERN
MP6205 Rev. 0. 92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
11
MP6205 –CURRENT-LIMITED POWER DISTRIBUTION SWITCHE
SOIC8E (EXPOSED PAD)
NOTICE: The information in this document is subject to change without notice. Users should warrant and guarantee that third
party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not
assume any legal responsibility for any said applications.
MP6205 Rev. 0.92
9/23/2009
www.MonolithicPower.com
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2009 MPS. All Rights Reserved.
12
Similar pages