Ecliptek EC1SMG-B-S-30.000MTR Crystal Datasheet

Marketing Bulletin
DATE:
May 1st, 2008
TO:
All Sales Personnel
FROM:
Isaac Gonzalez
RE:
Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective May 1st, 2008:
Series Description
EC1SM Resistance Welded Short HC-49/UP SMD Crystal
EC2SM Resistance Welded HC-49/UP SMD Crystal
Recommended Replacement
E1S Series
E2S Series
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after September 1st, 2009, with
delivery to conclude by December 31st, 2009.
If there are any questions pertaining to this bulletin, please feel free to contact me.
Thank you again for your cooperation.
Best Regards,
Isaac Gonzalez
Configuration Manager
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
EC1SM Series
EC1SM
• HC-49/UP short package
• AT or BT cut available
• Resistance weld seal
• Tight tolerance/stability
• Tape and reel available
H 3.20
L 13.30
W 4.85
CRYSTAL
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
3.579545MHz to 50.000MHz
Frequency Tolerance / Stability
±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only),
Over Operating Temperature Range
±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only)
Operating Temperature Range
0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only)
Aging (at 25°C)
±5ppm / year Maximum
Storage Temperature Range
-40°C to 85°C
Shunt Capacitance
7pF Maximum
Insulation Resistance
500 Megaohms Minimum at 100VDC
Drive Level
1 mWatt Maximum
Load Capacitance (CL)
18pF (Standard), Custom CL ≥10pF, or Series Resonant
EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT
Frequency Range
ESR (Ω)
Mode / Cut
Frequency Range
ESR (Ω)
Mode / Cut
3.579545MHz to 4.999MHz
200 Max
Fundamental / AT
15.000MHz to 15.999MHz
60 Max
Fundamental / AT
5.000MHz to 5.999MHz
150 Max
Fundamental / AT
16.000MHz to 23.999MHz
50 Max
Fundamental / AT
6.000MHz to 7.999MHz
120 Max
Fundamental / AT
24.000MHz to 30.000MHz
40 Max
Fundamental / AT
8.000MHz to 8.999MHz
90 Max
Fundamental / AT
24.000MHz to 40.000MHz
40 Max
Fundamental / BT
9.000MHz to 9.999MHz
80 Max
Fundamental / AT
28.6363MHz to 29.999MHz
150 Max
Third Overtone / AT
10.000MHz to 14.999MHz
70 Max
Fundamental / AT
30.000MHz to 50.000MHz
100 Max
Third Overtone / AT
MANUFACTURER
CATEGORY
SERIES
ECLIPTEK CORP.
CRYSTAL
EC1SM
800-ECLIPTEK www.ecliptek.com for latest revision
PACKAGE
HC-49/UP Short
CLASS
REV.DATE
CR21
03/06
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC1SM A - T - 20 - 30.000M TR
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel
FREQUENCY TOLERANCE / STABILITY
Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C
A=±50ppm at 25°C, ±100ppm from -20°C to 70°C
B=±50ppm at 25°C, ±100ppm from -40°C to 85°C
C=±30ppm at 25°C, ±50ppm from 0°C to 70°C
D=±30ppm at 25°C, ±50ppm from -20°C to 70°C
E=±30ppm at 25°C, ±50ppm from -40°C to 85°C
F=±15ppm at 25°C, ±30ppm from 0°C to 70°C
G=±15ppm at 25°C, ±30ppm from -20°C to 70°C
H=±15ppm at 25°C, ±30ppm from -40°C to 85°C
J=±15ppm at 25°C, ±20ppm from 0°C to 70°C
K=±15ppm at 25°C, ±20ppm from -20°C to 70°C
L=±15ppm at 25°C, ±20ppm from -40°C to 85°C
M=±10ppm at 25°C, ±15ppm from 0°C to 70°C
N=±10ppm at 25°C, ±15ppm from -20°C to 70°C
FREQUENCY
LOAD CAPACITANCE
Blank=18pF (Standard), S=Series
XX=XXpF (Custom)
MODE OF OPERATION / CRYSTAL CUT
Blank=Fundamental / AT,
B=Fundamental / BT
T=Third Overtone / AT
OBSOLETE
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Coplanarity: 0.36mm Maximum
Tolerances = ±0.2
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
24±.3
C
11.5±.1 1 0.75±.1
D
E
4 ±.2
2±.1
F
G
H
J
K
12±.2
B0*
1.5 +.1
A0*
.4±.1
REEL
1.
L
K0*
M
N
O
P
Q
5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
R
S
T
U
V
2.5 MIN
10 MIN
30.4 MAX
360 MAX
24.4+2-0
*Compliant to EIA-481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
PARAMETER
SPECIFICATION
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
Line 1: E XX.XXX M
M or Blank (No Marking)
Frequency in MHz
(5 Digits Maximum + Decimal)
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
ECLIPTEK CORP.
CRYSTAL
EC1SM
HC-49/UP Short
CR21
800-ECLIPTEK www.ecliptek.com for latest revision
REV.DATE
03/06
Specifications subject to change without notice.
EC2SM Series
EC2SM
• HC-49/UP package
• AT or BT cut available
• Resistance weld seal
• Tight tolerance/stability
• Tape and reel available
H 4.50
L 13.30
W 4.85
CRYSTAL
NOTES
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
3.579545MHz to 50.000MHz
Frequency Tolerance / Stability
±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only),
Over Operating Temperature Range
±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only)
Operating Temperature Range
0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only)
Aging (at 25°C)
±5ppm / year Maximum
Storage Temperature Range
-40°C to 85°C
Shunt Capacitance
7pF Maximum
Insulation Resistance
500 Megaohms Minimum at 100VDC
Drive Level
1 mWatt Maximum
Load Capacitance (CL)
18pF (Standard), Custom CL ≥10pF, or Series Resonant
EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT
Frequency Range
ESR (Ω)
Mode / Cut
Frequency Range
ESR (Ω)
Mode / Cut
3.579545MHz to 4.999MHz
200 Max
Fundamental / AT
15.000MHz to 15.999MHz
60 Max
Fundamental / AT
5.000MHz to 5.999MHz
150 Max
Fundamental / AT
16.000MHz to 23.999MHz
50 Max
Fundamental / AT
6.000MHz to 7.999MHz
120 Max
Fundamental / AT
24.000MHz to 30.000MHz
40 Max
Fundamental / AT
8.000MHz to 8.999MHz
90 Max
Fundamental / AT
24.000MHz to 40.000MHz
40 Max
Fundamental / BT
9.000MHz to 9.999MHz
80 Max
Fundamental / AT
28.6363MHz to 29.999MHz
150 Max
Third Overtone / AT
10.000MHz to 14.999MHz
70 Max
Fundamental / AT
30.000MHz to 50.000MHz
100 Max
Third Overtone / AT
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
REV.DATE
ECLIPTEK CORP.
CRYSTAL
EC2SM
HC-49/UP
CR03
03/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC2SM A - T - 20 - 30.000M TR
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel
FREQUENCY TOLERANCE / STABILITY
Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C
A=±50ppm at 25°C, ±100ppm from -20°C to 70°C
B=±50ppm at 25°C, ±100ppm from -40°C to 85°C
C=±30ppm at 25°C, ±50ppm from 0°C to 70°C
D=±30ppm at 25°C, ±50ppm from -20°C to 70°C
E=±30ppm at 25°C, ±50ppm from -40°C to 85°C
F=±15ppm at 25°C, ±30ppm from 0°C to 70°C
G=±15ppm at 25°C, ±30ppm from -20°C to 70°C
H=±15ppm at 25°C, ±30ppm from -40°C to 85°C
J=±15ppm at 25°C, ±20ppm from 0°C to 70°C
K=±15ppm at 25°C, ±20ppm from -20°C to 70°C
L=±15ppm at 25°C, ±20ppm from -40°C to 85°C
M=±10ppm at 25°C, ±15ppm from 0°C to 70°C
N=±10ppm at 25°C, ±15ppm from -20°C to 70°C
FREQUENCY
LOAD CAPACITANCE
Blank=18pF (Standard), S=Series
XX=XXpF (Custom)
MODE OF OPERATION / CRYSTAL CUT
Blank=Fundamental / AT,
B=Fundamental / BT
T=Third Overtone / AT
OBSOLETE
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Tolerances = ±0.2
Coplanarity: 0.36mm Maximum
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
C
D
E
24±.3
11.5±.1
10.75±.1
4 ±.2
2±.1
REEL
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
F
G
H
J
K
L
R
S
T
U
V
12±.2
B0*
1.5 +.1
A0*
.4±.1
K0*
2.5 MIN
10 MIN
30.4 MAX
360 MAX
24.4+2-0
*Compliant to EIA-481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
PARAMETER
SPECIFICATION
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-883, Method 210
MIL-STD-883, Method 215
Line 1: E XX.XXX M
M or Blank (No Marking)
Frequency in MHz
(5 Digits Maximum + Decimal)
MANUFACTURER
CATEGORY
SERIES
PACKAGE
CLASS
REV.DATE
ECLIPTEK CORP.
CRYSTAL
EC2SM
HC-49/UP
CR03
03/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Similar pages