Maxim MAX6250AESA Low-noise, precision, 2.5v/4.096v/5v voltage reference Datasheet

19-1139; Rev 3; 5/98
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
____________________________Features
♦ Low 1.0ppm/°C Temperature Coefficient
♦ Very Low 1.5µVp-p Noise (0.1Hz to 10Hz)
♦ ±0.02% Initial Accuracy
♦ ±15mA Output Source and Sink Current
♦ Low, 18mW Power Consumption (MAX6225)
♦ Industry-Standard Pinout
♦ Optional Noise Reduction and Voltage Trim
♦ Excellent Transient Response
♦ 8-Pin SO Package Available
♦ Low 20ppm/1000h Long-Term Stability
♦ Stable for All Capacitive Loads
Ordering Information
Applications
High-Resolution Analog-to-Digital
and Digital-to-Analog Converters
High-Accuracy Reference Standard
High-Accuracy Industrial and Process Control
Digital Voltmeters
ATE Equipment
Precision Current Sources
PART
TEMP. RANGE
PINPACKAGE
MAX
TEMPCO
(ppm/°C)
MAX6225ACPA
0°C to +70°C
8 Plastic DIP
2.0
MAX6225BCPA
MAX6225ACSA
MAX6225BCSA
MAX6225AEPA
MAX6225BEPA
MAX6225AESA
MAX6225BESA
MAX6225AMJA
MAX6225BMJA
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-55°C to +125°C
8 Plastic DIP
8 SO
8 SO
8 Plastic DIP
8 Plastic DIP
8 SO
8 SO
8 CERDIP
8 CERDIP
5.0
2.0
5.0
3.0
7.0
3.0
7.0
5.0
8.0
Ordering Information continued at end of data sheet.
Typical Operating Circuit
TOP VIEW
8V TO 36V INPUT
IN
OUT
2.2µF *
NR
MAX6225
MAX6241
MAX6250
Pin Configuration
REFERENCE OUT
I.C. 1
IN 2
NR 3
TRIM
2.2µF *
MAX6225
MAX6241
MAX6250
GND 4
8
I.C.
7
I.C.
6
OUT
5
TRIM
GND
DIP/SO
*OPTIONAL
I.C. = INTERNALLY CONNECTED; DO NOT USE
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 408-737-7600 ext. 3468.
MAX6225/MAX6241/MAX6250
General Description
The MAX6225/MAX6241/MAX6250 are low-noise, precision voltage references with extremely low 1ppm/°C
temperature coefficients and excellent ±0.02% initial
accuracy. These devices feature buried-zener technology for lowest noise performance. Load-regulation specifications are guaranteed for source and sink currents
up to 15mA. Excellent line and load regulation and low
output impedance at high frequency make them ideal
for high-resolution data-conversion systems up to
16 bits.
The MAX6225 is set for 2.500V output, the MAX6241 is
set for 4.096V output, and the MAX6250 is set for
5.000V output. All three provide for the option of external trimming and noise reduction.
MAX6225/MAX6241/MAX6250
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
ABSOLUTE MAXIMUM RATINGS
(Voltages Referenced to GND)
IN..............................................................................-0.3V to +40V
OUT, TRIM ...............................................................-0.3V to +12V
NR ..............................................................................-0.3V to +6V
OUT Short Circuit to GND Duration (VIN ≤ 12V)..........Continuous
OUT Short Circuit to GND Duration (VIN ≤ 40V) ....................5sec
OUT Short Circuit to IN Duration (VIN ≤ 12V) ..............Continuous
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C)................727mW
SO (derate 5.88mW/°C above +70°C) ............................471mW
CERDIP (derate 8.00mW/°C above +70°C) ....................640mW
Operating Temperature Ranges
MAX62_ _ _C_ A .....................................................0°C to +70°C
MAX62_ _ _E_ A ..................................................-40°C to +85°C
MAX62_ _ _MJA ................................................-55°C to +125°C
Storage Temperature Range ..............................-65°C to +150°C
Lead Temperature (soldering, 10sec)...............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—MAX6225
(VIN = 10V, IOUT = 0mA, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
Input Voltage Range
Output Voltage
Output Voltage Temperature
Coefficient (Note 1)
SYMBOL
CONDITIONS
TA
MIN
C, E, M
8
MAX6225A
+25°C
2.499
2.500
2.501
MAX6225B
+25°C
2.497
2.500
2.503
VIN
VOUT
TCVOUT
UNITS
36
V
C
1.0
2.0
MAX6225AE_A
E
1.5
3.0
MAX6225AMJA
M
2.0
5.0
MAX6225BC_A
C
2.5
5.0
MAX6225BE_A
E
2.5
7.0
MAX6225BMJA
M
2.5
8.0
+25°C
10
18
∆VOUT /
∆VIN
C
30
E
35
M
+25°C
10V ≤ VIN ≤ 36V
2
MAX
MAX6225AC_A
8V ≤ VIN ≤ 10V
Line Regulation (Note 2)
TYP
45
2
C
5
7
E
8
M
10
_______________________________________________________________________________________
V
ppm/°C
ppm/V
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
(VIN = 10V, IOUT = 0mA, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
Sourcing: 0mA ≤ IOUT ≤ 15mA
Load Regulation (Note 2)
Supply Current
∆VOUT/
∆IOUT
IIN
Trim-Adjustment Range
Turn-On Settling Time
Output Noise Voltage (Note 3)
∆VOUT
tON
en
Temperature Hysteresis
Long-Term Stability
Sinking: -15mA ≤ IOUT ≤ 0mA
Sinking: -15mA ≤ IOUT ≤ 0mA
∆VOUT / t
TA
TYP
MAX
C
MIN
1
6
E
1
7
M
3
15
C
1
6
E
1
7
M
10
30
+25°C
1.8
C, E, M
2.7
3.0
±15
±25
UNITS
ppm/mA
mA
Figure 1
C, E, M
To ±0.01% of final value
+25°C
5
mV
µs
0.1Hz ≤ f ≤ 10Hz
+25°C
1.5
µVp-p
10Hz ≤ f ≤ 1kHz
+25°C
1.3
(Note 4)
+25°C
20
ppm
+25°C
20
ppm/
1000h
2.8
µVRMS
_______________________________________________________________________________________
3
MAX6225/MAX6241/MAX6250
ELECTRICAL CHARACTERISTICS—MAX6225 (continued)
MAX6225/MAX6241/MAX6250
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
ELECTRICAL CHARACTERISTICS—MAX6241
(VIN = 10V, IOUT = 0mA, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
Input Voltage Range
Output Voltage
Output Voltage Temperature
Coefficient (Note 1)
SYMBOL
CONDITIONS
TA
MIN
C, E, M
8
MAX6241A
+25°C
4.095
4.096
4.097
MAX6241B
+25°C
4.092
4.096
4.100
VIN
VOUT
TCVOUT
1.0
2.0
E
1.5
3.0
MAX6241AMJA
M
2.0
5.0
MAX6241BC_A
C
2.5
5.0
MAX6241BE_A
E
2.5
7.0
M
2.5
8.0
+25°C
10
18
∆VOUT /
∆VIN
∆VOUT /
∆IOUT
Sinking: -15mA ≤ IOUT ≤ 0mA
Turn-On Settling Time
Output Noise Voltage (Note 3)
IIN
∆VOUT
tON
en
Temperature Hysteresis
Long-Term Stability
4
∆VOUT / t
C
30
E
35
M
45
+25°C
Sourcing: 0mA ≤ IOUT ≤ 15mA
Trim-Adjustment Range
V
C
10V ≤ VIN ≤ 36V
Supply Current
UNITS
36
MAX6241AE_A
8V ≤ VIN ≤ 10V
Load Regulation (Note 2)
MAX
MAX6241AC_A
MAX6241BMJA
Line Regulation (Note 2)
TYP
2
C
5
V
ppm/°C
ppm/V
7
E
8
M
10
C
1
6
E
1
7
M
3
9
C
1
6
E
1
7
M
7
18
+25°C
1.9
2.9
C, E, M
3.2
±40
mA
Figure 1
C, E, M
To ±0.01% of final value
+25°C
8
µs
0.1Hz ≤ f ≤ 10Hz
+25°C
2.4
µVp-p
10Hz ≤ f ≤ 1kHz
+25°C
2.0
(Note 4)
+25°C
20
ppm
20
ppm/
1000h
+25°C
±24
ppm/mA
ppm/mA
_______________________________________________________________________________________
mV
4.0
µVRMS
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
(VIN = 10V, IOUT = 0mA, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
Input Voltage Range
Output Voltage
SYMBOL
VIN
VOUT
Output Voltage Temperature
Coefficient (Note 1)
CONDITIONS
TCVOUT
5.001
MAX6250B
+25°C
4.995
5.000
5.005
MAX6250AC_A
C
1.0
2.0
MAX6250AE_A
E
1.5
3.0
MAX6250AMJA
M
2.0
5.0
MAX6250BC_A
C
2.5
5.0
MAX6250BE_A
E
2.5
7.0
MAX6250BMJA
M
2.5
8.0
+25°C
10
18
Output Noise Voltage (Note 3)
en
Temperature Hysteresis
Long-Term Stability
Note 1:
Note 2:
Note 3:
Note 4:
∆VOUT / t
C
30
E
35
M
45
+25°C
IIN
ton
V
5.000
∆VOUT /
∆IOUT
∆VOUT
36
8
∆VOUT /
∆VIN
Turn-On Settling Time
UNITS
4.999
Sinking: -15mA ≤ IOUT ≤ 0mA
Trim-Adjustment Range
MAX
+25°C
Sourcing: 0mA ≤ IOUT ≤ 15mA
Supply Current
TYP
C, E, M
10V ≤ VIN ≤ 36V
Load Regulation (Note 2)
MIN
MAX6250A
8V ≤ VIN ≤ 10V
Line Regulation (Note 2)
TA
2
C
5
V
ppm/°C
ppm/V
7
E
8
M
10
C
1
6
E
1
7
M
2
9
C
1
6
E
1
7
M
6
15
+25°C
2.0
3.0
C, E, M
3.3
±30
ppm/mA
mA
Figure 1
C, E, M
±50
mV
To ±0.01% of final value
+25°C
10
µs
0.1Hz ≤ f ≤ 10Hz
+25°C
3.0
10Hz ≤ f ≤ 1kHz
+25°C
2.5
(Note 4)
+25°C
20
ppm
+25°C
20
ppm/
1000h
µVp-p
5.0
µVRMS
Temperature coefficient is measured by the box method; i.e., the maximum ∆VOUT is divided by ∆T x VOUT.
Line regulation (∆VOUT / (VOUT x ∆VIN)) and load regulation (∆VOUT / (VOUT x ∆IOUT)) are measured with pulses and do
not include output voltage changes due to die-temperature changes.
Noise specifications are 100% tested for the 10Hz to 1kHz bandwidth. Contact factory for 100% noise testing in the 0.1Hz
to 10Hz bandwidth.
Temperature hysteresis is specified at TA = +25°C by measuring VOUT before and after changing temperature by +25°C
using the PDIP package.
_______________________________________________________________________________________
5
MAX6225/MAX6241/MAX6250
ELECTRICAL CHARACTERISTICS—MAX6250
__________________________________________Typical Operating Characteristics
(VIN = 10V, IOUT = 0mA, TA = +25°C, unless otherwise noted.)
MAX6241
NORMALIZED OUTPUT VOLTAGE
vs. TEMPERATURE
200
0.5
100
0
0
-0.5
-100
-1.0
-200
0.5
125
0
0
-0.5
-1.5
-55 -35 -15
5
25
65
45
5
25
45
-250
85 105 125
65
120
0.2
80
0.1
40
0
-0.1
-40
-0.2
-80
-0.3
-120
25
45
65
-160
85 105 125
MAX6250
CHANGE IN OUTPUT VOLTAGE
vs. OUTPUT CURRENT
MAX6241
CHANGE IN OUTPUT VOLTAGE
vs. OUTPUT CURRENT
MAX6225
CHANGE IN OUTPUT VOLTAGE
vs. OUTPUT CURRENT
TA = +85°C
150
100
TA = +85°C
-100
∆VOUT (µV)
50
100
TA = -40°C
TA = +25°C
0
TA = -40°C
TA = +25°C
0
10
20
30
40
-250
-40 -30 -20
-10
IOUT (mA)
0
10
20
30
-40 -30 -20
40
CHANGE IN OUTPUT VOLTAGE
vs. INPUT VOLTAGE
2.8
SUPPLY CURRENT (mA)
30
20
10
0
MAX6250
2.4
MAX6241
MAX6225
2.2
2.0
1.8
1.6
3.5
2.5
MAX6250
2.0
MAX6225
1.0
1.0
10
15
20
VIN (V)
25
30
35
40
40
MAX6241
1.2
-20
30
1.5
1.4
-10
20
3.0
2.6
40
10
SUPPLY CURRENT vs. TEMPERATURE
SUPPLY CURRENT vs. SUPPLY VOLTAGE
MAX6225-08
50
0
IOUT (mA)
3.0
MAX6225-04
60
5
-10
IOUT (mA)
SUPPLY CURRENT (mA)
-10
TA = +85°C
-200
-300
-40 -30 -20
TA = +25°C
-50
-150
-200
-400
TA = -40°C
MAX6225-09
-300
0
-100
-100
-200
MAX6225-05
200
MAX6225-06
MAX6225-07
300
200
0
5
TEMPERATURE (°C)
∆VOUT (µV)
∆VOUT (µV)
160
0.3
-0.4
-55 -35 -15
100
6
200
0.4
TEMPERATURE (°C)
200
0
240
0.5
TEMPERATURE (°C)
300
280
0.6
0
-125
-1
-55 -35 -15
-300
85 105 125
∆VOUT (mV)
1.0
250
1.0
MAX6225 03
0.7
375
∆VOUT (ppm)
300
∆VOUT (mV)
∆VOUT (mV)
1.5
MAX6225 -02
1.5
400
∆VOUT (ppm)
MAX6225 -01
2.0
MAX6225
NORMALIZED OUTPUT VOLTAGE
vs. TEMPERATURE
0
5
10
15
20
25
SUPPLY VOLTAGE (V)
30
35
40
-55 -35 -15
5
25 45
65
TEMPERATURE (°C)
_______________________________________________________________________________________
85 105 125
∆VOUT (ppm)
MAX6250
NORMALIZED OUTPUT VOLTAGE
vs. TEMPERATURE
∆VOUT (ppm)
MAX6225/MAX6241/MAX6250
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
MAX6241
OUTPUT NOISE-VOLTAGE
DENSITY vs. FREQUENCY
30
25
20
CNR = 1µF
15
10
70
50
40
30
10
0
0
100
1k
CNR = 1µF
20
5
10
CNR = 0µF
60
1k
CNR = 1µF
20
10
100
MAX6225-18
VOUT, 1µV/div
VOUT, 1µV/div
VOUT, 0.5µV/div
COUT = CNR = 0µF
1sec/div
RIPPLE REJECTION
vs. FREQUENCY (CNR = 0µF)
RIPPLE REJECTION
vs. FREQUENCY (CNR = 1µF)
OUTPUT IMPEDANCE vs. FREQUENCY
MAX6225
ISINK = 5mA
100
MAX6241
90
MAX6250
80
70
ISOURCE = 5mA
100k
85
MAX6250
80
75
70
65
60
60
1M
MAX6225
MAX6241
90
RIPPLE REJECTION (dB)
RIPPLE REJECTION (dB)
1
95
MAX6225-14
MAX6225-13
120
110
10
10k
MAX6250
0.1Hz to 10Hz NOISE
1sec/div
100
1k
MAX6225-16
1sec/div
OUTPUT IMPEDANCE (Ω)
30
10k
COUT = CNR = 0µF
1k
10k
FREQUENCY (Hz)
40
FREQUENCY (Hz)
MAX6225-17
100
50
MAX6241
0.1Hz to 10Hz NOISE
COUT = CNR = 0µF
10
60
FREQUENCY (Hz)
MAX6225
0.1Hz to 10Hz NOISE
0.01
CNR = 0µF
70
0
100
FREQUENCY (Hz)
0.1
80
10
10
10k
90
MAX6225-15
CNR = 0µF
35
100
OUTPUT NOISE DENSITY (nV/√ Hz)
40
80
OUTPUT NOISE DENSITY (nV/√ Hz)
45
MAX6225-11
90
MAX6225-10
OUTPUT NOISE DENSITY (nV/√ Hz)
50
MAX6250
OUTPUT NOISE-VOLTAGE
DENSITY vs. FREQUENCY
MAX6225-12
MAX6225
OUTPUT NOISE-VOLTAGE
DENSITY vs. FREQUENCY
10
100
1k
FREQUENCY (Hz)
10k
10
100
1k
10k
FREQUENCY (Hz)
_______________________________________________________________________________________
7
MAX6225/MAX6241/MAX6250
____________________________Typical Operating Characteristics (continued)
(VIN = 10V, IOUT = 0mA, TA = +25°C, unless otherwise noted.)
MAX6225/MAX6241/MAX6250
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
____________________________Typical Operating Characteristics (continued)
(VIN = 10V, IOUT = 0mA, TA = +25°C, unless otherwise noted.)
LOAD-TRANSIENT RESPONSE (SOURCING)
LOAD-TRANSIENT RESPONSE (SINKING)
MAX6225-19
MAX6225-20
0mA
A
10mA
A
-10mA
0mA
B
B
2µs/div
2µs/div
A: IOUT, 10mA/div (SINKING)
B: VOUT, 500µV/div
A: IOUT, 10mA/div (SOURCING)
B: VOUT, 500µV/div
MAX6225
TURN-ON AND TURN-OFF TRANSIENT RESPONSE
LOAD-TRANSIENT RESPONSE
MAX6225-21
MAX6225-26
-10mA
A
+10V
A
+10mA
0V
B
B
VIN = 10V
COUT = CNR = 0µF
CIN = COUT = CNR = 0µF
1µs/div
1µs/div
A: IOUT (±10mA SOURCE AND SINK), 20mA/div, AC COUPLED
B: VOUT, 20mV/div, AC COUPLED
A:
B:
VIN, 10V/div
VOUT, 1V/div
MAX6250
TURN-ON AND TURN-OFF TRANSIENT RESPONSE
MAX6241
TURN-ON AND TURN-OFF TRANSIENT RESPONSE
MAX6225-27
MAX6225-25
+10V
A
+10V
A
0V
0V
B
B
CIN = COUT = CNR = 0µF
CIN = COUT = CNR = 0µF
1µs/div
1µs/div
A: VIN, 10V/div
B: VOUT, 1V/div
8
A: VIN, 10V/div
B: VOUT, 1V/div
_______________________________________________________________________________________
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
PIN
NAME
1, 7, 8
I.C.
Internally Connected. Do not use.
2
IN
Positive Power-Supply Input
NR
Noise Reduction. Optional capacitor
connection for wideband noise
reduction. Leave open if not used
(Figure 2).
3
FUNCTION
4
GND
Ground
5
TRIM
External Trim Input. Allows ±1%
output adjustment (Figure 1).
Leave open if not used.
6
OUT
Voltage Reference Output
Noise Reduction
To augment wideband noise reduction, add a 1µF
capacitor to the NR pin (Figure 2). Larger values do not
improve noise appreciably ( see Typical Operating
Characteristics).
Noise in the power-supply input can affect output
noise, but can be reduced by adding an optional
bypass capacitor to the IN pin and GND.
Bypassing
The MAX6225/MAX6241/MAX6250 are stable with
capacitive load values from 0µF to 100µF, for all values
of load current. Adding an output bypass capacitor can
help reduce noise and output glitching caused by load
transients.
Applications Information
Negative Regulator
Detailed Description
Temperature Stability
The MAX6225/MAX6241/MAX6250 are highly stable,
low-noise voltage references that use a low-power temperature-compensation scheme to achieve laboratorystandard temperature stability. This produces a nearly
flat temperature curve, yet does not require the power
associated with heated references.
The output voltage can be trimmed a minimum of 0.6%
by connecting a 10kΩ potentiometer between OUT and
GND, and connecting its tap to the TRIM pin, as shown
in Figure 1. The external trimming does not affect temperature stability.
Figure 3 shows how both a +5V and -5V precision reference can be obtained from a single unregulated +5V
supply. A MAX681 generates approximately ±9V to
operate the MAX6250 reference and MAX432 inverting
amplifier. The +5V is inverted by the MAX432 chopperstabilized amplifier. Resistor R1 is optional, and may be
used to trim the ±5V references. R2 and R4 should be
matched, both in absolute resistance and temperature
coefficient. R3 is optional, and is adjusted to set the -5V
reference.
8V TO 36V INPUT
8V TO 36V INPUT
IN
IN
REFERENCE OUT
OUT
NR
MAX6225
MAX6241
MAX6250
*
TRIM
GND
REFERENCE OUT
OUT
10k
NR
1µF
MAX6225
MAX6241
MAX6250
TRIM
GND
*OPTIONAL
Figure 1. Output Voltage Adjustment
Figure 2. Noise-Reduction Capacitor
_______________________________________________________________________________________
9
MAX6225/MAX6241/MAX6250
_____________________Pin Description
MAX6225/MAX6241/MAX6250
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
+5V INPUT
3.3µF
C1+
VCC
V+
+REFERENCE OUT
IN
C1-
OUT
R2
100k
MAX865
3.3µF
C1
2.2µF
C2+
C2-
GND
MAX6250
V-
NR
TRIM
GND
R1
10k
C3
2.2µF
C2
1µF
2.2µF
R3
1k
C4
1µF
MAX432
R4
100k
-REFERENCE OUT
Figure 3. +5V and -5V References from a Single +5V Supply
Ordering Information (continued)
PART
TEMP. RANGE
PINPACKAGE
MAX
TEMPCO
(ppm/°C)
MAX6241ACPA
0°C to +70°C
8 Plastic DIP
2.0
MAX6241BCPA
MAX6241ACSA
MAX6241BCSA
MAX6241AEPA
MAX6241BEPA
MAX6241AESA
MAX6241BESA
MAX6241AMJA
MAX6241BMJA
MAX6250ACPA
MAX6250BCPA
MAX6250ACSA
MAX6250BCSA
MAX6250AEPA
MAX6250BEPA
MAX6250AESA
MAX6250BESA
MAX6250AMJA
MAX6250BMJA
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-55°C to +125°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-55°C to +125°C
8 Plastic DIP
8 SO
8 SO
8 Plastic DIP
8 Plastic DIP
8 SO
8 SO
8 CERDIP
8 CERDIP
8 Plastic DIP
8 Plastic DIP
8 SO
8 SO
8 Plastic DIP
8 Plastic DIP
8 SO
8 SO
8 CERDIP
8 CERDIP
5.0
2.0
5.0
3.0
7.0
3.0
7.0
5.0
8.0
2.0
5.0
2.0
5.0
3.0
7.0
3.0
7.0
5.0
8.0
10
___________________Chip Information
TRANSISTOR COUNT: 435
______________________________________________________________________________________
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
SOICN.EPS
PDIPN.EPS
______________________________________________________________________________________
11
MAX6225/MAX6241/MAX6250
________________________________________________________Package Information
___________________________________________Package Information (continued)
CDIPS.EPS
MAX6225/MAX6241/MAX6250
Low-Noise, Precision, +2.5V/+4.096V/+5V
Voltage References
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1998 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
Similar pages