IDT IDTQS3125 Quickswitch products high-speed cmos quadruple bus switch with individual active Datasheet

IDTQS3125
HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ENABLES
INDUSTRIAL TEMPERATURE RANGE
QUICKSWITCH® PRODUCTS
HIGH-SPEED CMOS
QUADRUPLE BUS SWITCH WITH
INDIVIDUAL ACTIVE LOW ENABLES
DESCRIPTION:
FEATURES:
•
•
•
•
•
IDTQS3125
The QS3125 provides a set of four high-speed low resistance CMOS
switches connecting inputs to outputs without propagation delay and without
generating additional ground bounce noise. Individual enables (OE) are
used to turn on the switches. The QS3125 is ideal for signal and control
switching since the device adds no noise, ground bounce, propagation
delay, or significant power consumption to the system. The QS3125 can also
be used for analog switching applications such as video.
QuickSwitch devices provide an order of magnitude faster speed than
conventional logic devices.
The QS3125 is characterized for operation at -40°C to +85°C.
Enhanced N channel FET with no inherent diode to Vcc
Pin compatible with the 74’125 function
Zero propagation delay, zero added ground bounce
Undershoot clamp diodes on all switch and control inputs
Available in QSOP and SOIC packages
APPLICATIONS:
•
•
•
•
Hot-swapping, hot-docking
Voltage translation (5V to 3.3V)
Power conservation
Capacitance reduction and isolation (mass storage, work
stations)
• Logic replacement (data processing)
• Clock gating
• Bus isolation
FUNCTIONAL BLOCK DIAGRAM
1A
2A
3A
4A
1Y
2Y
3Y
4Y
1O E
2O E
3O E
4O E
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
c
2011 Integrated Device Technology, Inc.
FEBRUARY 2011
1
DSC-5598/5
IDTQS3125
HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ENABLES
ABSOLUTE MAXIMUM RATINGS(1)
PIN CONFIGURATION
1
2
16
3
14
1Y
4
13
4Y
2OE
5
12
2A
6
11
3OE
3A
2Y
7
10
3Y
GND
8
9
NC
NC
1OE
1A
INDUSTRIAL TEMPERATURE RANGE
15
VCC
4OE
4A
Symbol
Description
VTERM(2)
Max
Unit
VTERM(3)
Supply Voltage to Ground
–0.5 to +7
V
DC Switch Voltage VS
–0.5 to +7
V
VTERM(3)
DC Input Voltage VIN
–0.5 to +7
V
VAC
AC Input Voltage (pulse width ≤20ns)
–3
V
IOUT
DC Output Current
120
mA
PMAX
Maximum Power Dissipation (TA = 85°C)
0.5
W
TSTG
Storage Temperature
–65 to +150
°C
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC .
CAPACITANCE (TA = +25°C, f = 1MHz, VIN = 0V, VOUT = 0V)
QSOP
TOP VIEW
Pins
Typ.
Max. (1)
Unit
OE (Inputs)
3
5
pF
Quickswitch Channels (Switch OFF)
5
7
pF
NOTE:
1. This parameter is guaranteed but not production tested.
PIN DESCRIPTION
14
1A
1
2
13
4OE
1Y
3
12
4A
2OE
4
11
4Y
2A
5
10
3OE
2Y
6
9
3A
1OE
GND
7
8
VCC
Pin Names
I/O
1A - 4A
I/O
Bus A
Description
1Y - 4Y
I/O
Bus Y
1OE - 4OE
I
Bus Switch Enable
FUNCTION TABLE(1)
3Y
xOE
xA
xY
L
H
H
Connect
L
L
L
Connect
H
X
X
Disconnect
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
X = Don't Care
SOIC
TOP VIEW
2
Function
IDTQS3125
HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ENABLES
INDUSTRIAL TEMPERATURE RANGE
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Industrial: TA = –40°C to +85°C, VCC = 5V ± 5%
Symbol
Parameter
VIH
Input HIGH Voltage
VIL
IIN
Test Conditions
Min.
Typ.(1) Max.
Unit
Guaranteed Logic HIGH for Control Inputs
2
—
—
V
Input LOW Voltage
Guaranteed Logic LOW for Control Inputs
—
—
0.8
V
Input Leakage Current (Control Inputs)
0V ≤ VIN ≤ VCC
—
—
±1
μA
I OZ
Off-State Current (Hi-Z)
0V ≤ VOUT ≤ VCC, Switches OFF
—
—
±1
μA
RON
Switch ON Resistance(2)
VCC = Min., VIN = 0V, ION = 30mA
—
5
7
Ω
VCC = Min., VIN = 2.4V, ION = 15mA
—
10
15
VP
Pass Voltage(3)
VIN = VCC = 5V, IOUT = -5μA
3.7
4
4.2
NOTES:
1. Typical values are at VCC = 5V and TA = 25°C.
2. RON is guaranteed but not production tested.
3. Pass voltage is guaranteed but not production tested.
TYPICAL ON RESISTANCE vs VIN AT VCC = 5V
16
R ON
14
(ohms)
12
10
8
6
4
2
0
0.0
0.5
1.0
1.5
2.0
V IN
(Volts)
3
2.5
3.0
3.5
V
IDTQS3125
HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ENABLES
INDUSTRIAL TEMPERATURE RANGE
POWER SUPPLY CHARACTERISTICS
Symbol
Parameter
Test Conditions(1)
Max.
Unit
ICCQ
Quiescent Power Supply Current
VCC = Max., VIN = GND or VCC, f = 0
3
μA
ΔICC
Power Supply Current per Input HIGH(2)
VCC = Max., VIN = 3.4V, f = 0
2.5
mA
ICCD
Dynamic Power Supply Current per MHz (3)
VCC = Max., A and Y Pins Open, Control Inputs Toggling @ 50% Duty Cycle
0.25
mA/MHz
NOTES:
1. For conditions shown as Min. or Max., use the appropriate values specified under DC Electrical Characteristics.
2. Per TTL-driven input (VIN = 3.4V, control inputs only). A and Y pins do not contribute to ΔIcc.
3. This current applies to the control inputs only and represents the current required to switch internal capacitance at the specified frequency. The A and Y inputs generate no significant
AC or DC currents as they transition. This parameter is guaranteed but not production tested.
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
TA = -40°C to +85°C, VCC = 5V ± 5%
CLOAD = 50pF, RLOAD = 500Ω unless otherwise noted.
Symbol
Min. (1)
Parameter
Typ.
Max.
Unit
⎯
⎯
0.25(3)
ns
tPLH
tPHL
Data Propagation Delay(2)
tPZL
tPZH
Switch Turn-On Delay
OE to xA/xY
1.5
⎯
6.5
ns
tPLZ
Switch Turn-Off Delay(2)
1.5
⎯
5.5
ns
tPHZ
OE to xA/xY
A to Y
NOTES:
1. Minimums are guaranteed but not production tested.
2. This parameter is guaranteed but not production tested.
3. The bus switch contributes no propagation delay other than the RC delay of the ON resistance of the switch and the load capacitance. The time constant for the switch alone
is of the order of 0.25ns at CL = 50pF. Since this time constant is much smaller than the rise and fall times of typical driving signals, it adds very little propagation delay to the
system. Propagation delay of the bus switch, when used in a system, is determined by the driving circuit on the driving side of the switch and its interaction with the load on
the driven side.
4
IDTQS3125
HIGH-SPEED CMOS QUADRUPLE BUS SWITCH WITH INDIVIDUAL ENABLES
INDUSTRIAL TEMPERATURE RANGE
ORDERING INFORMATION
QS
XXXXX
XX
Device Type Package
X
Process
X
Blank
8
Tube or Tray
Tape and Reel
Blank
Industrial (-40°C to +85°C)
QG
S1G
Quarter Size Outline Package - Green
Small Outline IC - Green
3125
High Speed CMOS Quadruple Bus Switch with
Individual Active Low Enables
Datasheet Document History
02/08/2011
Pg. 5
Updated the ordering information by removing the "IDT" notation, non RoHS part and by adding
Tape and Reel information.
CORPORATE HEADQUARTERS
6024 Silver Creek Valley Road
San Jose, CA 95138
for SALES:
800-345-7015 or 408-284-8200
fax: 408-284-2775
www.idt.com
5
for Tech Support:
[email protected]
Similar pages