ARINC 600 Backshells 527-277 Feed Through Backshell Assembly & Adapters for Size 2 ARINC 600 Series Connectors 527 277 NF P5 Product Series Connector Designator (See Note 2) P = All manufacturers' Plug and Receptacle Shells except the following: P1 = Cannon BKAD****322 Series Plug P2 = Cannon BKAC & BKAE Series Environmental Plug P3 = Cannon/Boeing BACC66 Plug P5 = Radiall/Boeing BACC66 Plug Basic Number Finish (Table I) 1.790 (45.5) 1.082 1.067 (27.5) (27.1) 2.090 (53.1) 1 1/16-18 UNEF-2B 3 Places 5.355 5.345 (136.0) (135.8) 4.730 (120.1) 3.770 3.760 (95.8) (95.5) 2.004 1.994 (50.9) (50.6) See 687-488 Series Adapters on Opposite 5.610 (142.5) Page 2.945 (74.8) 1.258 1.248 (32.0) (31.7) .125 (3.2) Dia 10 Places .681 (17.3) .168 / .158 (4.3) / (4.0) 1.415 / 1.405 (35.9) / (35.7) Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] F-14 ARINC 600 Backshells 527-277 Feed Through Backshell Assembly & Adapters for Size 2 ARINC 600 Series Connectors TABLE II: FINISH OPTIONS Symbol B C* G* J LF M N NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. ARINC 600 Series Connector Backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. Prior to ordering, consult factory with connector partnumbers not shown in the Part Number Development to ensure a proper fit. Finish Symbol Finish Cadmium Plate/Olive Drab NC Zinc Cobalt/Dark Olive Drab Black Anodize NF Cadmium Plate/Olive Drab over Anodic Hard Coat Electroless Nickel Gold Iridite over Cadmium Plate T Cadmium Plate/Bright over over Electroless Nickel Electroless Nickel Cadmium Plate/Bright over U** Cadmium Plate/Black Electroless Nickel ZN Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding Electroless Nickel applications. Cadmium Plate/Olive Drab over **Applicable to corrosion resisting steel backshells and Electroless Nickel accessories. Consult factory for other available finishes. 687-488 EMI/RFI Adapter and Cap for 527-277 Feed Through Backshell (See Opposite Page & Above) 687-488 NF 03 D Product Series Termination Style D = 2-Ring Termination for Individual or Overall Braid Basic Number Finish (See Table I Above) Dash No. (Table II) .188 (4.8) Typ .800 (20.3) A C Across Points Typ .300 (7.6) Cable Entry B 1 1/16-18 UNEF-2A Typ D Hex Stock Typ TABLE II: CAP & ADAPTER DIMENSIONS & CABLE ENTRY Dash A No. Style Max 00 I –– 03 II .760 (19.3) 04 II .760 (19.3) 06 II .760 (19.3) 08 II .760 (19.3) II .760 (19.3) 10 12 II .760 (19.3) II 1.073 (27.3) 16 B Max –– .844 (21.4) .906 (23.0) 1.093 (27.8) 1.187 (30.1) 1.281 (32.5) 1.500 (38.1) 1.719 (43.7) C Ref 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.250 (31.8) 1.375 (34.9) 1.620 (41.1) D 1.125 1.125 1.125 1.125 1.125 1.125 1.250 1.500 (28.6) (28.6) (28.6) (28.6) (28.6) (28.6) (31.8) (38.1) Cable Min –– .157 (4.0) .187 (4.7) .281 (7.1) .344 (8.7) .375 (9.5) .438 (11.1) .562 (14.3) Range Max –– .250 (6.4) .312 (7.9) .437 (11.1) .562 (14.3) .625 (15.9) .750 (19.1) .938 (23.8) Metric dimensions (mm) are indicated in parentheses. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] F-15