Rosenberger IEC60169-4 7/16 straight plug Datasheet

TECHNICAL DATA SHEET
7/16
STRAIGHT PLUG
60S131-806N1
All dimensions are in mm; tolerances according to ISO 2768 m-H
Interface
According to
IEC 60169-4, VG 95250, EN 122190, DIN 47223
Documents
Assembly instruction
53 O13
Material and plating
RF_35/12.04/3.0
Connector parts
Center contact
Outer contact
Body
Dielectric
Gasket
Crimping ferrule
Material
Spring bronze
Brass
Brass
PTFE
Silicone
Copper
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Plating
Silver, 3-6 µm
Flash white bronze over silver(e.g. Optargen®)
Flash white bronze over silver(e.g. Optargen®)
Flash white bronze over silver(e.g. Optargen®)
Tel.: +49 8684 18-0
Page
email: [email protected]
1/2
TECHNICAL DATA SHEET
7/16
STRAIGHT PLUG
60S131-806N1
Electrical data
50 
DC to 7.5 GHz
 30 dB, DC to 2.5 GHz
 28 dB, 2.5 to 5 GHz
 0.05 dB
 104 M
 0.4 m
 1.5 m
500 V rms, 50 Hz
1800 W @ 1 GHz
800 W @ 4 GHz
 128 dB up to 1 GHz
Impedance
Frequency
Return loss
Insertion loss
Insulation resistance
Center contact resistance
Outer contact resistance
Working voltage (at sea level)
Power handling (at 20 °C, sea level, VSWR 1.0)
RF-leakage
- Limitations are possible due to the used cable type -
Mechanical data
Mating cycles
Coupling nut retention
Center contact captivation: axial
radial
Coupling torque (recommended)
Proof torque
min. 500
 1000 N
 200 N
 2 Ncm
25 to 30 Nm
max. 35 Nm
Environmental data
Temperature range
Rapid change of temperature
Corrosion salt mist
Vibration
Damp heat
Climatic tests
RoHS
-45°C to +85°C
DIN EN 122190,
DIN EN 122190,
DIN EN 122190,
DIN EN 122190,
DIN EN 122190,
compliant
clause
clause
clause
clause
clause
4.6.7
4.6.10
4.6.3
4.6.6
4.6.5 (45/85/56)
Tooling
Crimping tool
Crimp insert
11W150-000
11W150-208
Suitable cables
RG 141 /U, RG 58 C/U
Weight
Weight
106.9 g/pce
RF_35/12.04/3.0
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Date
Approved
Date
Rev.
Engineering change number
Name
Date
Inge Mühlauer
29/06/04
J_Gramsamer
07.04.15
j00
15-0397
J_Krautenb.
07.04.15
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel.: +49 8684 18-0
Page
email: [email protected]
2/2
Similar pages