OPTOWAY PDA-1300A-HSA

Optoway
PDA-1300
****************************************************************************************************************************************************************
PDA-1300
InGaAs PIN Photodiode Module for CATV Receiver
****************************************************************************************************************************************************************
DESCRIPTION
PDA-1300 InGaAs PIN Photodiode series are high quality analog photodetectors designed for AM CATV
receiver applications. These coaxial modules are optically aligned to optimize performance and balance the
parameters of responsivity, distortion and back reflection. PDA-1300 series are suitable in forward and return
path applications including AM-VSB CATV, QAM 64/256, PON, FTTC and FTTH receivers.
FEATURES
Electro-Optical
l Low Inter-modulation Distortion
l High Responsivity
l Low Back Reflection
Packaging
l Single mode 900 µm fiber with or without a connector
l Single mode 250 µm fiber with or without a connector
ABSOLUTE MAXIMUM RATINGS
Stress in excess of the absolute maximum rating can cause permanent damage to the device. These are
absolute stress rating only. Functional operation of the device is not implied at these or any other conditions
in excess of these given in the operational sections of the datasheet. Exposure to absolute ratings for
extended periods can adversely affect device reliability.
Parameter
Forward Current
Reverse Current
Reverse Voltage
Power Dissipation
Soldering Temperature
Operating Temperature Range
Storage Temperature Range
Symbol
PDISS
Tsolder
Top
Tstg
Min
Max
Unit
-40
-40
10
10
25
100
260/10
85
85
mA
mA
V
mW
o
C/sec
o
C
o
C
CHARACTERISTICS
ELECTRICAL AND OPTICAL CHARACTERISTICS (TC = 25ºC, VR = 12V)
Symbol
R
Parameter
Test Conditions
Min.
Responsivity
λ= 1300nm
0.8
λ= 1550nm
0.85
Typ.
Max.
Unit
A/W
Note (1*)
-70
dBc
BR
2 Order Intermodulation
Modulation
Back Reflection
λ= 1300 nm, 1550 nm
-40
dB
Idark
Dark Current
VR=5V
1
nA
C
Capacitance
f=1MHz, Case Ground, VR=5V
0.8
pF
BW
Bandwidth
3 dB down, RL=50Ω
IM2
nd
0.6
2.0
1.0
Fiber Length
GHz
1.5
m
1*. IM2 measured at VR=12V, λ=1550nm, Pavg=0dBm, MI=0.7, RLOAD=50, f1 = 244 MHz, f2=250MHz
****************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
E-mail: [email protected]
Fax: 886-3-5979737
http: // www.optoway.com.tw 8/1/2006 V2.0
Optoway
PDA-1300
****************************************************************************************************************************************************************
PRECAUTIONS for USE
ESD protection is imperative. Use of grounding straps, anti-static mats, and other ESD protective
equipment is recommended when handling or testing an InGaAs PIN or any other junction photodiodes.
Fiber pigtails should be handled with less than 10N pull and with a bending radius greater than 30 mm.
MECHANICAL DIMENSION (mm) and PIN ASSIGNMENT
Note: 1. Specifications subject to change without notice.
2. Other PIN assignment is available upon request.
ORDER INFORMATION
Part No.: P D A − 1
Code
0
1
3
0
Fiber Buffer
900 µm
250 µm
□
□ − □ □ □
Code Flange
V
Vertical
H Horizontal
X
No Flange
Code
X
SA
FA
Connector Type
No Connector
SC/APC
FC/APC
Code PIN Assignment
Blank
Standard
A to Z
others
****************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
E-mail: [email protected]
Fax: 886-3-5979737
http: // www.optoway.com.tw 8/1/2006 V2.0