Microsemi LX5535LQ Ingap hbt 2.4 - 2.5 ghz power amplifier Datasheet

LX5535
®
TM
InGaP HBT 2.4 – 2.5 GHz Power Amplifier
PRODUCTION
KEY FEATURES
DESCRIPTION
The output power for EVM(Error
Vector Magnitude) of 3.5% is 25dBm
(64QAM/54Mbps), where the PA
consumes 260mA total DC current.
The LX5535 is available in a 16-pin
3mm x 3mm micro-lead package
(MLPQ-16L). The compact footprint,
low profile, and thermal capability of
the MLP package makes the LX5535 an
ideal solution for high-gain power
amplifier requirements for IEEE
802.11b/g and WiMAX applications.
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Advanced InGaP HBT
2.4-2.5GHz Operation
Single-Polarity 3-5V Supply
Quiescent Current 120mA
Power Gain 32 dB
Power for EVM~3.5 %
54Mbps/64QAM : 25dBm
Total Current 260mA for
Pout=25dBm, 802.11g
802.11b mask-compliant
power : 28dBm
Total Current 370mA for
Pout=+28dBm, 802.11b
2
Small Footprint: 3x3mm
Low Profile: 0.9mm
WWW . Microsemi .C OM
The LX5535 is a power amplifier
optimized for WLAN applications in
the 2.4-2.5 GHz frequency range. The
PA is implemented as a three-stage
monolithic microwave integrated
circuit (MMIC) with active bias and
output pre-matching.
The device is manufactured with an
InGaP/GaAs Heterojunction Bipolar
Transistor
(HBT)
IC
process
(MOCVD). With single low voltage
supply of 5V, it provides 32 dB power
gain between 2.4-2.5GHz, at a low
quiescent current of 120mA.
D ATA S HEET
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
APPLICATIONS
ƒ IEEE 802.11b/g
ƒ IEEE 802.16 WiMAX
PRODUCT HIGHLIGHT
MSC
MSC
5535
5530
703A
608Y
LX5535
PACKAGE ORDER INFO
LQ
Plastic MLPQ
3×3 16 pin
RoHS Compliant / Pb-free
LX5535LQ
Note: Available in Tape & Reel.
Append the letter “TR” to the part number.
(i.e. LX5535LQ-TR)
Copyright © 2007
Rev. 1.0b, 2007-09-14
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1
TM
®
Thank you for your interest in Microsemi® Analog Mixed Signal products.
The full data sheet for this device contains proprietary information.
To obtain a copy, please contact your local Microsemi sales representative. The
name of your local representative can be obtained at the following link
http://www.microsemi.com/contact/contactfind.asp
or
Contact us directly by sending an email to:
[email protected]
Be sure to specify the data sheet you are requesting and include your company
name and contact information and or vcard.
We look forward to hearing from you.
Copyright
Microsemi
Analog Mixed Signal Group
11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
WWW . Microsemi .C OM
INFORMATION
Similar pages