ETC2 CFPO-DO-450S12A5N Range of super single oven ocxoâ Datasheet

CFPO-DO Series
Description
■ The CFPO-DO series are a range of Super Single Oven
OCXO’s designed as a compact and smart frequency
source/time keeping reference for all synchronization
systems including global ositioning system (GPS)
based equipment
CFPO-DO series key performances are:■
Holdover better than 7µs over 24 hours
■
Frequency stability over operating temperature range
( see table text )
■
Frequency stability versus change of all operating
conditions (pressure, supply, load, etc.)
Package Options (metal leaded package, hermetically
sealed)
■
CFPO-DO-1 50.8 x 50.8 x 25.0mm (50)
■
CFPO-DO-2 51.0 x 41.0 x 25.0mm (51)
■
CFPO-DO-3 51.0 x 41.0 x 19.05mm (51B)
■
CFPO-DO-4 40.0 x 30.0 x 20.0mm (40)
Environmental Specification (non-operating)
Storage temperature range -55 to 85°C
■
Shocks - half-sine 50g 11ms / 3 per direction
IEC 68-2-27 Test Ea / Severity 50A
■ Vibration - 10g / 10-500Hz IEC 68-2-06 Test
Fc / Severity 500/10
■
Marking (printed label on top of can)
■
C-MAC or Customer’s Logo
■
C-MAC or Customer’s Part Number
■
Nominal Frequency (Fo) in MHz
■
Serial Number (1 letter & 5 numbers )
■
Date Code (4 digits for year and week)
Phase Noise @10.0MHz typical (sinewave)
■
10Hz -125dBc/Hz
■
100Hz -145dBc/Hz
■
1kHz -155dBc/Hz
■
10kHz -158dBc/Hz
Outline in mm - Package 50 (without Oven Alarm)
20.3 20.3
Supply Options
■
Standard: 12V ±5% (12)
3
1 2
40.6SQ
ISSUE 1; 19 OCTOBER 2004
Bottom View
Standard Frequencies
■
10.0, 12.8, 13.0MHz
4
5
Frequency Ranges
■
8.192 to 15.0MHz
■
Initial tolerance @ 25°C Fo ±1x10-7
Pin
1.
2.
3.
4.
5.
Function
Input frequency control
Output ref. voltage
Output signal
Mechanical GND
and (–) supply
Input supply (+)
25.0 max
50.8SQ max
Power Consumption
■ Warm-up: <750mA
■
@25°C: <250mA (calm air)
Warm Up Time @ 25°C (typical)
±1 x 10-8 after 10 mins
All tolerances ±0.2mm
■
5.0
∅1.0±0.05
Retrace after 24 Hours off @25°C (typical)
■
±3 x 10-9 after 60 minutes
Output Compatibility
■
Sinewave +7dBm ±2dBm into 50Ω load (S)
■
Squarewave optional (C)
3
4
5
2
6
1
40.0 max
30.0max
25.4
22.9
0.95
∅0.8±0.05
Pin Function
1. Input frequency control
2. Output reference
voltage
3. Input supply (+)
4. Output signal
5. Mechanical GND
and (-) supply
All tolerances ±0.2mm
4.0±0.5
Reference Voltage
■
Standard Reference voltage output +8V
■
Optional +5.0V or +6.2V (except Package 40)
17.8
Oven Alarm “logic level” signal (optional) (A)
■
Logic “0” during warm-up time and if oven is not
operating
■
Logic “1” when temperature regulation is operating
Bottom
View
19.5 max
OCXOs
Outline in mm - Package 40 (with Oven Alarm)
Frequency Adjustment
■
> ±3 x 10-7 from 0V to reference voltage, monotonic
& standard positive slope (negative slope optional).
Sufficient to cover 10 years ageing
Harmonic Distortion
■
Harmonics & sub-harmonics < -30dBc
■
Non-Harmonics < -75dBc
Europe Tel: +44 (0)1460 270200
Americas Tel: +1 919 941 9333
Asia
Tel: +86 755 8826 5991
Fax: +44 (0)1460 72578
Fax: +1 919 941 9371
Fax: +86 755 8826 5990
Website: www.cmac.com
Electrical Specification
Operating
Temperature
Range
Stability
within
Temperature
Range
pk to pk
Long Term Stability
(after 1 week operation)
Frequency
Stability Vs Supply
Voltage Change Standard Package Type
(±5%) and Load
(max height)
Over 10 Years
Change
(50Ω±10%)
Model
Number
Per Day
Per Month
Per Year
<1x10-10
<±5x10-11
<±1.5x10-9
<±1.2x10-8
<±6x10-8
<±5x10-11
(50) 25mm
CFPO-DO-1
<2x10-10
<±7x10-11
<±2x10-9
<±1.5x10-8
<±7.5x10-8
<±1x10-10
(51) 25mm
CFPO-DO-2
<5x10-10
<±1x10-10
<3x10-9
<±2x10-8
<±1x10-7
<±1x10-10
(51B) 19.05mm
CFPO-DO-3
<1x10-9
<±2x10-10
<5x10-9
<±5x10-8
<±3x10-7
<±5x10-10
(40) 20mm (*)
CFPO-DO-4
-20 to 70°C
Ordering Example
CFPO-DO-1
50
S
12
A
8.0 10.0MHz
Model Number
Package Outline 50, 51, 51B, 40 (see above table)
Output Signal (S) (Sine is standard) (C)(HCMOS optional)
Supply Voltage (12) (12V is standard)
Oven Alarm Option (A)
Reference Voltage (8.0V standard, optional = 5V or 6.2V with packages 50 & 51
No Reference for all models = N)
Frequency (MHz)
For non standard options such as different temperature ranges, negative slope EFC, cold start-up please contact our sales
office. (*) Package height 16mm max will be available from mid 2005
Outlin in mm - Package 51B (without Oven Alarm)
6
5
25.0 max
4
5.0
∅1.0±0.05
All tolerances ±0.2mm
1
4
32.0
Pin Function
1. Mechanical
GND and supply
2 . Frequency control input
3 . Ref. voltage output
4 . Supply Input
5 . Signal output
6. Oven Alarm
2
5
19.05 max
Bottom View
3
Bottom View
∅1.0±0.05
5.0
1
32.0
2
41.0 max
3
41.0 max
51.0 max
42.0
51.0 max
42.0
Pin Function
1. Mechanical
GND and supply
2 . Frequency control input
3 . Ref. voltage output
4 . Supply input
5 . Signal output
All tolerances ±0.2mm
10.15
Europe Tel: +44 (0)1460 270200
Americas Tel: +1 919 941 9333
Asia
Tel: +86 755 8826 5991
Fax: +44 (0)1460 72578
Fax: +1 919 941 9371
Fax: +86 755 8826 5990
Website: www.cmac.com
OCXOs
Outline in mm - Package 51 (with Oven Alarm)
Similar pages