GE GP30G Glass passivated junction plastic rectifier Datasheet

GP30A THRU GP30M
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
FEATURES
D
*
DO-201AD
T
E
♦ Plastic package has
Underwriters Laboratory
Flammability Classification 94V-0
♦ High temperature metallurgically
bonded construction
♦ Glass passivated cavity-free junction
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ 3.0 Ampere operation at TA=55°C with no thermal
runaway
♦ Typical IR less than 0.1µA
♦ High temperature soldering guaranteed:
350°C/10 seconds 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
N
E
P
A
T
Forward Current - 3.0 Amperes
1.0 (25.4)
MIN.
0.210 (5.3)
0.190 (4.8)
DIA.
0.375 (9.5)
0.285 (7.2)
0.052 (1.32)
0.048 (1.22)
DIA.
1.0 (25.4)
MIN.
MECHANICAL DATA
Dimensions in inches and (millimeters)
*Glass-plastic encapsulation technique is covered by
Case: JEDEC DO-201AD molded plastic over glass body
Terminals: Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 ounce, 1.12 grams
Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306
®
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
GP
30A
GP
30B
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
Maximum RMS voltage
VRMS
35
70
140
280
Maximum DC blocking voltage
VDC
50
100
200
400
600
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55°C
I(AV)
3.0
Amps
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (JEDEC Method)
IFSM
125.0
Amps
Maximum instantaneous forward voltage at 3.0A
Maximum reverse current
at rated DC blocking voltage
TA=25°C
TA=150°C
Maximum full load reverse current, full cycle average
0.375" (9.5mm) lead length at TA=55°C
VF
IR
GP
30D
GP
30G
1.2
GP
30J
GP
30K
GP
30M
600
800
1000
Volts
420
560
700
Volts
800
1000
Volts
1.1
5.0
100.0
UNITS
Volts
µA
IR(AV)
100.0
µA
Maximum reverse recovery time (NOTE 1)
trr
3.0
µs
Typical junction capacitance (NOTE 2)
CJ
40.0
pF
RΘJA
RΘJL
20.0
10.0
°C/W
TJ, TSTG
-65 to +175
°C
Typical thermal resistance (NOTE 3)
Operating junction and storage temperature range
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
RATINGS AND CHARACTERISTIC CURVES GP30A THRU GP30M
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
4.0
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD RECTIFIED CURRENT,
AMPERES
FIG. 1 - FORWARD CURRENT DERATING CURVE
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
3.0
2.0
1.0
0.375" (9.5mm) LEAD LENGTH
0
0
25
50
75
100
125
150
200
100
10
175
TJ=TJ max.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
1
10
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
FIG. 4 - TYPICAL REVERSE
CHARACTERISTICS
INSTANTANEOUS REVERSE LEAKAGE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD CURRENT,
AMPERES
100
100
NUMBER OF CYCLES AT 60 HZ
AMBIENT TEMPERATURE, °C
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
10
1
10
TJ=125°C
1
TJ=75°C
0.1
TJ=25°C
0.01
0
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
0.1
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
100
JUNCTION CAPACITANCE, pF
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
10
1
10
REVERSE VOLTAGE, VOLTS
100
100
Similar pages