M100A - M100M GENERAL PURPOSE PLASTIC RECTIFIER DIODES VOLTAGE RANGE: 50 - 1000V CURRENT: 1.0 A Features ! ! ! ! ! ! Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Construction utilizes void-free molded plastic technique Low reverse leakage High surge current capability High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension B A A C D Mechanical Data ! ! ! ! ! ! Case: DO-41,Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Approx. Weight: 0.35 grams Mounting Position: Any Marking: Type Number DO-41 Dim Min Max A 25.40 ¾ B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Maximum repetitive peak reverse voltage VRRM Maximum RMS voltage M100A M100B 50 100 M100D M100G M100J 200 400 600 M100K M100M 800 Unit 1000 V VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375" (9.5mm) lead length at T A=100°C I(AV) 1.0 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) at TA=75°C IFSM 50.0 A VF 1.0 IR(AV) 100.0 µA IR 1.0 50.0 µA Maximum instantaneous forward voltage at 1.0A Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TA=55°C Maximum DC reverse current at rated DC blocking voltage T=25°C A TA=100°C 1.1 V Typical reverse recovery time (NOTE 1) trr 2.0 µs Typical junction capacitance (NOTE)2 CJ 15.0 pF Typical thermal resistance (NOTE 3) RΘJA RΘJL 50.0 25.0 °C/W TJ, TSTG -50 to +150 °C Operating junction and storage temperature range NOTES: (1) Measured with IF=0.5A, IR=0.1A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted 1 of 2 www.sunmate.tw RATINGS AND CHARACTERISTIC CURVES M100A THRU M100M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE 50 60 HZ RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.2 1.0 0.2 x 0.2” (5.0 x 5.0mm) COPPER PADS 0.8 0.375” (9.5mm) LEAD LENGTH 0.6 0.4 8.3ms SINGLE HALF SINE WAVE (JEDEC Method) TA = 75°C 40 30 20 10 0.2 0 0 25 50 75 100 125 NUMBER OF CYCLES AT 60 HZ 175 150 100 10 1 AMBIENT TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1,000 INSTANTANEOUS REVERSE CURRENT, µA INSTANTANEOUS FORWARD CURRENT, AMPERES 100 10 1 0.1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.01 0.6 0.8 1.0 1.2 1.4 1.6 100 10 1 0.1 TJ=25°C 0.01 1.8 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 20 40 60 80 100 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 10 TRANSIENT THERMAL IMPEDANCE, °C/W 100 100 JUNCTION CAPACITANCE, pF 0 PERCENTAGE OF PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS 1 0.1 TJ=150°C 100 10 1 0.1 0.01 0.1 1 10 100 t, PULSE DURATION, sec. REVERSE VOLTAGE, VOLTS 2 of 2 www.sunmate.tw