S07B-M, S07D-M, S07G-M, S07J-M, S07M-M Vishay Semiconductors Small Signal Switching Diode, High Voltage Features • • • • • • • • • For surface mounted applications Low profile package Ideal for automated placement Glass passivated High temperature soldering: 260 °C/10 s at terminals Wave and reflow solderable AEC-Q101 qualified Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 61249-2-21 definition 17249 Mechanical Data Case: DO-219AB (SMF) Polarity: band denotes cathode end Weight: approx. 15 mg Packaging codes/options: 18/10K per 13" reel (8 mm tape) 08/3K per 7" reel (8 mm tape) Parts Table Part S07B-M Ordering code Marking Remarks S07B-M-18 or S07B-M-08 UB Tape and reel S07D-M S07D-M-18 or S07D-M-08 UD Tape and reel S07G-M S07G-M-18 or S07G-M-08 UG Tape and reel S07J-M S07J-M-18 or S07J-M-08 UJ Tape and reel S07M-M S07M-M-18 or S07M-M-08 UM Tape and reel Document Number 85191 Rev. 1.1, 20-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 S07B-M, S07D-M, S07G-M, S07J-M, S07M-M Vishay Semiconductors Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Part Symbol Value Unit S07B-M VRRM 100 V S07D-M VRRM 200 V S07G-M VRRM 400 V S07J-M VRRM 600 V S07M-M VRRM 1000 V S07B-M VRMS 70 V S07D-M VRMS 140 V S07G-M VRMS 280 V S07J-M VRMS 420 V S07M-M VRMS 700 V S07B-M VDC 100 V S07D-M VDC 200 V S07G-M VDC 400 V S07J-M VDC 600 V VDC 1000 V 1) IF(AV) 1.5 A TA = 65 °C 1) IF(AV) 0.7 A TL = 25 °C IFSM 25 A S07M-M Ttp = 75 °C Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave Note: 1) Averaged over any 20 ms period Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit RthJA 180 K/W TJ, TSTG - 55 to + 150 °C Thermal resistance junction to ambient air 1) Operating junction and storage temperature range Note: 1) Mounted on epoxy substrate with 3 mm x 3 mm CU pads (≥ 40 mm thick) Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Max. Unit 1 A 1) VF 1.1 V TA = 25 °C IR 10 μA TA = 125 °C IR 50 μA IF = 0.5 A, IR = 1 A, Irr = 0.25 A trr 1.8 μs Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Reverse recovery time Typical capacitance at 4 V, MHz Cj Min. Typ. 4 pF Note: 1) Pulse test: 300 µ pulse width, 1 % duty cycle www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85191 Rev. 1.1, 20-Aug-10 [email protected], [email protected], [email protected] S07B-M, S07D-M, S07G-M, S07J-M, S07M-M Vishay Semiconductors Typical Characteristics Tamb = 25 °C, unless otherwise specified 1.2 Instantaneous Reverse Current (µA) 100 Average Forward Current (A) Resistive or inductive load 1.0 0.8 0.6 0.4 0.2 3.0 mm x 3.0 mm 40 µm thick copper pad areas 0 0 17375 20 40 60 80 100 120 140 TJ = 150 °C 10 TJ = 100 °C 1 TJ = 75 °C TJ = 25 °C 100 200 300 400 500 600 700 800 900 Instantaneous Reverse Voltage (V) 17377 Figure 3. Typical Instantaneous Reverse Characteristics 1000 Instantaneous Forward Current (mA) TJ = 50 °C 0.1 0.01 0 160 Ambient Temperature (°C) Figure 1. Forward Current Derating Curve 10 9 8 TJ = 150 °C 7 C (pF) TJ = 25 °C TJ = 100 °C 6 5 4 3 2 1 100 600 17376 TJ = 125 °C 700 800 900 1000 Figure 2. Typical Instantaneous Forward Characteristics Document Number 85191 Rev. 1.1, 20-Aug-10 0 1100 Instantaneous Forward Voltage (mV) 17378 0 5 10 15 20 25 30 35 40 V R (V) Figure 4. Capacitance vs. Reverse Voltage For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 S07B-M, S07D-M, S07G-M, S07J-M, S07M-M Vishay Semiconductors Package Dimensions in millimeters (inches): DO-219AB (SMF) 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 1.7 (0.067) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 www.vishay.com 4 For technical questions within your region, please contact one of the following: Document Number 85191 Rev. 1.1, 20-Aug-10 [email protected], [email protected], [email protected] S07B-M, S07D-M, S07G-M, S07J-M, S07M-M Vishay Semiconductors Blistertape Dimensions for SMF in millimeters PS Document-No.: S8-V-3717.02-001 (3) 18513 Document Number 85191 Rev. 1.1, 20-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000