New Product SS2P2L & SS2P3L Vishay General Semiconductor Low VF High Current Density Surface Mount Schottky Barrier Rectifiers FEATURES • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency • Low thermal resistance • Meets MSL level 1, per J-STD-020C, LF max peak of 260 °C • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DO-220AA (SMP) TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheelling, dc-to-dc converters, and polarity protection applications. MAJOR RATINGS AND CHARACTERISTICS IF(AV) 2A VRRM 20 V, 30 V IFSM 50 A EAS 11.25 mJ VF 0.45 V Tj max. 150 °C MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetive peak reverse voltage VRRM SS2P2L SS2P3L 22L 23L 20 30 UNIT V Maximum average forward rectified current (see Fig. 1) IF(AV) 2.0 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load IFSM 50 A Non-repetitive avalanche energy at IAS = 1.5 A, L = 10 mH, Tj = 25 °C EAS 11.25 mJ Voltage rate of change (rated VR) dv/dt 10000 V/us TJ, TSTG - 55 to + 150 °C Operating junction and storage temperature range ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP MAX. UNIT Maximum instantaneous forward at IF = 2 A, Tj = 25 °C at IF = 2 A, Tj = 125 °C voltage (1) VF 0.45 0.38 0.50 0.45 V Maximum reverse current at rated VR (1) Tj = 25 °C Tj = 125 °C IR 9.0 200 20 µA mA Typical junction capacitance at 4.0 V, 1 MHz CJ 130 pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle Document Number: 88916 Revision: 16-May-07 www.vishay.com 1 New Product SS2P2L & SS2P3L Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL SS2P2L SS2P3L 115 15 20 RθJA RθJL RθJC Typical thermal resistance (1) UNIT °C/W Note: (1) Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 x 5.0 mm copper pad areas. RθJL is measured at the terminal of cathode band. RθJC is measured at the top centre of the body ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SS2P3L-E3/84A 0.024 84A 3000 7" Diameter Plastic Tape & Reel SS2P3L-E3/85A 0.024 85A 10000 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Forward Current (A) Average Forward Rectified Current (A) 2.4 2.0 1.6 1.2 0.8 TL measured at the cathode band terminal 0.4 90 100 110 120 130 140 150 Tj = 125 °C 0.3 0.5 0.7 0.9 1.1 1.3 Lead Temperature (°C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 3. Typical Instantaneous Forward Characteristics 50 100000 Instantaneous Reverse Leakage Current (µA) Peak Forward Surge Current (A) Tj = 25 °C 1 0.1 0.1 0 80 Tj = 150 °C 10 Tj = 150 °C 10000 40 30 20 10 Tj = 125 °C 1000 100 Tj = 25 °C 10 1 0.1 0 1 10 100 10 20 30 40 50 60 70 80 90 100 Number of Cycles at 50 Hz Percent of Rated Peak Reverse Voltage (%) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Figure 4. Typical Reverse Leakage Characteristics www.vishay.com 2 Document Number: 88916 Revision: 16-May-07 New Product SS2P2L & SS2P3L Vishay General Semiconductor 1000 Transient Thermal Impedance (°C/W) Junction Capacitance (pF) 1000 100 100 1 0.01 1 0.1 1 10 10 100 0.1 1 10 100 Reverse Voltage (V) t - Pulse Duration (s) Figure 5. Typical Junction Capacitance Figure 6. Typical Transient Thermal impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF Cathode band 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.025 (0.635) 0.030 (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) Document Number: 88916 Revision: 16-May-07 0.036 (0.91) 0.024 (0.61) 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.100 (2.54) 0.050 (1.27) 0.018 (0.45) 0.006 (0.15) www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1