DDTA (R2-ONLY SERIES) KA PNP PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR Please click here to visit our online spice models database. Features • • • • • A Epitaxial Planar Die Construction Complementary NPN Types Available (DDTC) Built-In Biasing Resistor, R2 only Lead Free/RoHS Compliant (Note 2) "Green" Device Note 3 & 4 B C Mechanical Data • • • • • • • • • SC-59 G Case: SC-59 Case Material: Molded Plastic, "Green" Molding Compound, Note 4. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Copper leadframe). Terminal Connections: See Diagram Marking Information: See Table Below & Page 3 Ordering Information: See Page 3 Weight: 0.008 grams (approximate) H Min Max A 0.35 0.50 B 1.50 1.70 C 2.70 3.00 D 0.95 G 1.90 H 2.90 3.10 J 0.013 0.10 K 1.00 1.30 L 0.35 0.55 OUT M 0.10 0.20 3 α 0° 8° K M J Dim L D C All Dimensions in mm B R2 P/N DDTA114GKA DDTA124GKA DDTA144GKA DDTA115GKA R2 (NOM) 10KΩ 22KΩ 47KΩ 100KΩ Maximum Ratings Type Code P26 P27 P28 P29 E 1 2 GND(+) IN Schematic and Pin Configuration @TA = 25°C unless otherwise specified Characteristic Symbol Value Unit Collector-Base Voltage VCBO -50 V Collector-Emitter Voltage VCEO -50 V Emitter-Base Voltage VEBO -5 V IC (Max) -100 mA Collector Current Power Dissipation Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage Temperature Range Notes: 1. 2. 3. 4. Pd 200 mW RθJA 625 °C/W TJ, TSTG -55 to +150 °C Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants. DS30344 Rev. 8 - 2 1 of 3 www.diodes.com DDTA (R2-ONLY SERIES) KA © Diodes Incorporated Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current DDTA114GKA DDTA124GKA DDTA144GKA DDTA115GKA Emitter Cutoff Current Collector-Emitter Saturation Voltage DC Current Transfer Ratio Symbol BVCBO BVCEO Min -50 -50 Typ ⎯ ⎯ Max ⎯ ⎯ BVEBO 5 ⎯ ⎯ ICBO ⎯ -300 -140 -65 -30 ⎯ 30 56 68 82 -30 ⎯ ⎯ ⎯ -0.5 -580 -260 -130 -58 -0.3 ⎯ ⎯ ⎯ 250 +30 ⎯ IEBO VCE(sat) DDTA114GKA DDTA124GKA DDTA144GKA DDTA115GKA Bleeder Resistor (R2) Tolerance Gain-Bandwidth Product* hFE ΔR2 fT ⎯ Unit Test Condition V IC = -50μA V IC = -1mA IE = -720μA, DDTA114GKA IE = -330μA, DDTA124GKA V IE = -160μA, DDTA144GKA IE = -72μA, DDTA115GKA μA VCB = -50V μA VEB = -4V V IC = -10mA, IB = -0.5mA ⎯ IC = -5mA, VCE = -5V % ⎯ MHz VCE = -10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only Typical Curves – DDTA114KA 1 VCE(SAT), COLLECTOR EMITTER VOLTAGE (V) PD, POWER DISSIPATION (mW) 250 200 150 100 50 0 -50 0 50 100 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Derating Curve IC/IB = 10 75°C 0.1 -25°C 25°C 0.01 0.001 150 0 10 20 30 40 IC, COLLECTOR CURRENT (mA) Fig. 2 VCE(SAT) vs. IC 50 12 1,000 COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN f = 1MHz 100 10 8 6 4 2 10 1 DS30344 Rev. 8 - 2 10 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain 100 2 of 3 www.diodes.com 0 0 10 5 20 25 30 15 VR, REVERSE BIAS VOLTAGE (V) Fig. 4 Output Capacitance DDTA (R2-ONLY SERIES) KA © Diodes Incorporated 1,000 10 75°C VO = 0.2V 100 Vin, INPUT VOLTAGE (V) IC , COLLECTOR CURRENT (mA) VO = 5V 10 1 0.1 1 0.01 0.001 0 9 6 7 4 8 5 3 Vin, INPUT VOLTAGE (V) Fig. 5 Collector Current vs. Input Voltage 1 2 0.1 10 0 200 500 600 300 400 IC, COLLECTOR CURRENT (mA) Fig. 6 Input Voltage vs. Collector Current 100 700 Ordering Information (Note 4 & 5) Device DDTA114GKA-7-F DDTA124GKA-7-F DDTA144GKA-7-F DDTA115GKA-7-F Notes: Packaging SC-59 SC-59 SC-59 SC-59 Shipping 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information PXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September YM PXX Date Code Key Year 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Code N P R S T U V W X Y Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30344 Rev. 8 - 2 3 of 3 www.diodes.com DDTA (R2-ONLY SERIES) KA © Diodes Incorporated