Ecliptek EC2620ETTTS-40.000MTR Oscillator Datasheet

EC26 Series
EC26
• RoHS Compliant (Pb-Free)
• Ceramic SMD package
• 3.3V supply voltage
• LVHCMOS/TTL output
• Stability to 20ppm
• Standby Function
• Available in tube or tape and reel
H 1.6
L 7.0
W 5.0
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
1.544MHz to 125.000MHz and 125.009MHz, 125.00937MHz, 125.010MHz, 127MHz, 128MHz, 130MHz, 132MHz,
133MHz, 133.333MHz, 137.472MHz, 142.850MHz, 150MHz, 155.520MHz and 156.250MHz
Operating Temperature Range Frequency Tolerance/Stability options of ±100ppm, ±50ppm, ±25ppm, ±20ppm available -10°C to 70°C
-40°C to 85°C
Frequency Tolerance/Stability options of ±100ppm, ±50ppm, ±25ppm available
Frequency Tolerance/Stability option of ±20ppm available from 1.544MHz to 106.250MHz -40°C to 85°C
-55°C to 125°C
Storage Temperature Range
3.3VDC ±10%
Supply Voltage (VDD)
10mA Maximum
Input Current
1.544MHz to 32.000MHz
18mA Maximum
32.000001MHz to 50.000MHz
20mA Maximum
50.000001MHz to 70.000MHz
40mA Maximum
70.000001MHz to 125.000MHz
60mA Maximum
125.009MHz to 156.250MHz
±100ppm Maximum
Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C,
±50ppm Maximum
Frequency Stability over the Operating Temperature Range,
±25ppm Maximum
Supply Voltage Change, Output Load Change, First Year Aging
±20ppm Maximum
at 25°C, Shock, and Vibration
90% of VDD Minimum
Output Voltage Logic High (VOH) w/HCMOS or TTL Load , IOH= -8mA
10% of VDD Maximum
Output Voltage Logic Low (VOL) w/HCMOS or TTL Load, IOL= +8mA
5 nSeconds Maximum
Rise / Fall Time
10% to 90% of Waveform w/15pF HCMOS Load or 0.4VDC to 2.4VDC w/10LSTTL Load < 35.000MHz
7 nSeconds Maximum
10% to 90% of Waveform w/30pF HCMOS Load or 0.4VDC to 2.4VDC w/10TTL Load < 35.000MHz
10% to 90% of Waveform w/HCMOS Load or 0.4VDC to 2.4VDC w/TTL Load 35.001MHz to 125.000MHz 5 nSeconds Maximum
3 nSeconds Maximum
10% to 90% of Waveform w/HCMOS Load > 125.009MHz
50 ±10(%) (Standard)
Duty Cycle
at 50% of Waveform w/HCMOS Load or 1.4VDC w/TTL Load < 70.000MHz
50 ±10(%) (Standard)
at 50% of Waveform w/HCMOS Load > 70.000MHz
50 ±5(%) (Optional)
at 50% of waveform w/HCMOS Load or w/TTL Load < 125.000MHz
50 ±5(%) (Optional)
at 50% of waveform w/HCMOS Load, at 25°C, at 3.3Vdc > 125.000MHz
10TTL or 30pF HCMOS Load Max.
Load Drive Capability
<35.000MHz
10TTL or 15pF HCMOS Load Max.
35.000001MHz to 70.000MHz
15pF HCMOS Load Maximum
>70.000001MHz
Enables Output
Tri-State Input Voltage
No Connection
Enables Output
VIH :≥70% of VDD
Disables Output: High Impedance
VIL :≤30% of VDD
10µA Maximum
Standby Current
Disabled Output: High Impedance
10 mSeconds Maximum
Start Up Time
1pSeconds Maximum
RMS Phase Jitter
12kHz to 20MHz offset frequency
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC26
CERAMIC
3.3V
OS30
01/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
PART NUMBERING GUIDE
EC26 00 ET T TS - 40.000M TR
FREQUENCY TOLERANCE / STABILITY
00=±100ppm Maximum (Standard)
45=±50ppm Maximum, 25=±25ppm Maximum
20=±20ppm Maximum
PACKAGING OPTIONS
Blank=Bulk, TR=Tape and Reel (Standard)
OPERATING TEMPERATURE RANGE
Blank=-10°C to 70°C (Standard)
ET=-40°C to 85°C
OUTPUT CONTROL FUNCTION
TS=Tri-State
FREQUENCY
DUTY CYCLE
Blank=50 ±10(%) (Standard), T=50 ±5(%)
MECHANICAL DIMENSIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Tri-State
Pin 2: Case Ground
TAPE AND REEL DIMENSIONS
Pin 3: Output
Pin 4: Supply Voltage
Tolerances = ±0.1
ALL DIMENSIONS IN MILLIMETERS
TAPE
A
B
C
D
E
16+.3-.1
7.5±.1
6.75±.1
4 ±.1
2±.1
F
M
N
O
P
Q
1.5 MIN
50 MIN
20.2 MIN
13±.2
40 MIN
QTY/REEL
1,000
REEL
F
G
H
J
K
L
R
S
T
U
V
8±.1
B0*
1.5 +.1-0
A0*
.3 ±.05
K0*
2.5 MIN
10 MIN
22.4 MAX
360 MAX
16.4+2-0
*Compliant to EIA 481A
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Line 1: ECLIPTEK
Characteristic
Specification
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC26
CERAMIC
3.3V
OS30
01/06
800-ECLIPTEK www.ecliptek.com for latest revision
Specifications subject to change without notice.
Ecliptek MEMS Oscillators
- Lower Cost, Quicker Delivery Alternative!
The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant
cost advantages by utilizing a revolutionary new MEMS resonator technology. This important
innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for samples
and 5 to 10 days for quantities up to 10,000 pieces on tape and reel.
Package Dimensions
(all dimensions in millimeters)
Supply
Voltage
(VDC)
5x7
3.2 x 5
2.5 x 3.2
2 x 2.5
1.8
EMK11
EMK21
EMK31
EMK41
2.5
EMK12
EMK22
EMK32
EMK42
3.3
EMK13
EMK23
EMK33
EMK43
Would you like to request EMO™ samples or a quotation now?
Click Here
Want to learn more about the Ecliptek EMO™ family of MEMS oscillators?
Click Here
Product Features:
•
•
•
•
•
•
•
•
•
Improved frequency stability through the use of a MEMS resonator
1.8VDC, 2.5VDC, or 3.3VDC supply voltages
Frequency range of 1MHz to 125MHz, HCMOS output
Frequency stability to ±50ppm, -40°C to +85°C operation
Tri-state or power down functions
RoHS compliant
High temperature +260°C reflow capability
EIA compliant tape and reel packaging
Four SMD package sizes
If you have any questions or would like additional information regarding the
Ecliptek EMO™ family of oscillators, please contact our Sales Department.
Similar pages