AD ADM1815-R22ARTZ-RL2 Microprocessor reset circuit Datasheet

Microprocessor Reset Circuits
ADM1810 to ADM1813/ADM1815 to ADM1818
FEATURES
VCC
RST
VCC
TOLERANCE
BIAS
150ms
DELAY
GND
GENERAL DESCRIPTION
ADM1811/ADM1816
5.5kΩ
RST
VCC
TOLERANCE
BIAS
150ms
DELAY
GND
VCC
The ADM181x range of voltage monitoring circuits is used in
any application where an electronic system needs to be reset
when a voltage increases above or below a predetermined value.
Because of the reset delay time incorporated into the ADM181x
series, these devices provide a safe startup for electronic systems.
Before a system initializes, the power supply must stabilize.
Using the ADM181x series ensures that there are typically 150 ms
for the power supply to stabilize before the system resets and
safe system initialization begins.
TC
REFERENCE
VCC
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Automotive systems
ADM1810/ADM1815
TC
REFERENCE
ADM1812/ADM1817
RST
VCC
TOLERANCE
BIAS
150ms
DELAY
GND
TC
REFERENCE
ADM1813/ADM1818
VCC
RESET
MONITOR
The ADM181x series of microprocessor reset circuits are
available in low cost, space-saving SOT-23 and SC70 packages.
VCC
TOLERANCE
BIAS
GND
5.5kΩ
RST
150ms
DELAY
TC
REFERENCE
00064-001
Reliable low cost voltage monitor with reset output
Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power
supply voltages
Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V,
2.31 V, and 2.18 V typical
Active high and low push-pull output choices: ADM1810,
ADM1812, ADM1815, and ADM1817
Open-drain output choices: ADM1811, ADM1813, ADM1816,
and ADM1818
Can be used with a manual push-button to generate a reset:
ADM1813, ADM1818
Initialization of microprocessor systems with added safety
Available in 3-lead SOT-23 and SC70 packages
FUNCTIONAL BLOCK DIAGRAMS
Figure 1.
Rev. E
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©1999–2008 Analog Devices, Inc. All rights reserved.
ADM1810 to ADM1813/ADM1815 to ADM1818
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................6
Applications ....................................................................................... 1
Theory of Operation ...........................................................................7
General Description ......................................................................... 1
Timing Diagrams for All Devices ...............................................7
Functional Block Diagrams ............................................................. 1
ADM1813 and ADM1818..............................................................7
Revision History ............................................................................... 2
ADM1810, ADM1812, ADM1815, and ADM1817 .....................7
Specifications..................................................................................... 3
ADM1811 and ADM1816..............................................................7
Absolute Maximum Ratings............................................................ 4
Outline Dimensions ..........................................................................8
ESD Caution .................................................................................. 4
Ordering Guide .............................................................................9
Pin Configurations and Function Descriptions ........................... 5
REVISION HISTORY
8/08—Rev. D to Rev. E
2/03—Rev. A to Rev. B.
Changes to Table 3 ............................................................................ 5
Updated Outline Dimensions ......................................................... 8
Changes to Ordering Guide ............................................................ 9
Edits to Features.................................................................................1
Deleted Table I ...................................................................................1
Edits to Specifications .......................................................................2
Edits to Absolute Maximum Ratings ..............................................3
Edits to Ordering Guide ...................................................................3
Added Typical Performance Characteristics .................................4
Edits to ADM1813 AND ADM1818 section .................................5
Edits to ADM1810, ADM1812, ADM1815, and
ADM1817 Section .............................................................................5
Edits to ADM1811 and ADM1816 Section ...................................5
Updated Outline Dimensions ..........................................................6
3/02—Rev. 0 to Rev. A.
Addition of Table ..............................................................................1
Edits to Ordering Guide ...................................................................3
Addition of New Text to ADM1813 and ADM1818 Section ......4
10/05—Rev. C to Rev. D
Updated Format .................................................................. Universal
Added Figure 3 .................................................................................. 5
Changes to Table 3 ............................................................................ 5
Updated Outline Dimensions ......................................................... 8
Editsto Ordering Guide ................................................................... 9
9/03—Rev. B to Rev. C.
Added SC70 ......................................................................... Universal
Edits to Specifications ...................................................................... 2
Edits to Ordering Guide .................................................................. 4
Updated Outline Dimensions ......................................................... 7
4/99—Rev.0: Initial Version
Rev. E | Page 2 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
SPECIFICATIONS
VCC = full operating range, TA = −40°C to +105°C, unless otherwise noted.
Table 1.
Parameter
SUPPLY
Voltage
Min
Typ
Max
Unit
Comments
9
4
5.5
5.5
16
10
V
V
μA
μA
TA = 0°C to 105°C
TA = −40°C to +105°C
VCC = 5.5 V, VCC > VTH, no load
VCC = 3.6 V, VCC > VTH, no load
VCC ≥ VTH (max), reset not asserted (ADM1810/ADM1815)
VCC ≤ VTH (min), reset asserted (ADM1812/ADM1817)
VCC ≥ 2.7 V, reset asserted, VOUT = 0.4 V
(ADM1810/ADM1811/ADM1813/ADM1815/ADM1816/
ADM1818)
VCC ≥ 2.7 V, reset not asserted, VOUT = 0.4 V
(ADM1812/ADM1817)
ADM1810/ADM1812/ADM1815/ADM1817 @ 0 μA to
500 μA
1
1.2
Current
OUTPUT CURRENT
RST Output Source Current
RST Output Source Current
RST Output Sink Current
8
μA
μA
mA
RST Output Sink Current
8
mA
OUTPUT VOLTAGE
VCC TRIP POINT
ADM1810-5, ADM1811-5, ADM1812-5,
ADM1813-5
ADM1810-10, ADM1811-10,
ADM1812-10, ADM1813-10
ADM1815-5, ADM1816-5, ADM1817-5,
ADM1818-5
ADM1815-10, ADM1816-10,
ADM1817-10, ADM1818-10
ADM1815-20, ADM1816-20,
ADM1817-20, ADM1818-20
ADM1815-R23, ADM1816-R23,
ADM1817-R23, ADM1818-R23
ADM1815-R22, ADM1816-R22,
ADM1817-R22, ADM1818-R22
INTERNAL PULL-UP RESISTOR
ADM1811/ADM1816
ADM1813/ADM1818
OUTPUT CAPACITANCE
RESET ACTIVE TIME
VCC DETECT TO RESET
Falling
Rising
PUSH-BUTTON DETECT TO RST
PUSH-BUTTON RESET
350
350
VCC − 0.5
VCC − 0.1
4.50
4.62
4.75
V
4.25
4.35
4.49
V
2.98
3.06
3.15
V
2.80
2.88
2.97
V
2.47
2.55
2.64
V
2.25
2.31
2.37
V
2.12
2.18
2.25
V
3.5
3.1
5.5
5.5
100
150
7.5
7.5
10
250
kΩ
kΩ
pF
ms
10
150
250
μs
ms
μs
tR = 5 μs
(ADM1813/ADM1818)
150
250
ms
(ADM1813/ADM1818)
100
1
100
V
Rev. E | Page 3 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter
VCC
Input Current
Operating Temperature Range
Storage Temperature Range
θJA Thermal Impedance, SOT-23
θJA Thermal Impedance, SC70
Lead Temperature (Soldering, 10 sec)
Vapor Phase (60 sec)
Infrared (15 sec)
Rating
−0.3 V to +6.0 V
20 mA
−40°C to +105°C
−65°C to +150°C
270°C/W
146°C/W
300°C
215°C
220°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. E | Page 4 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
VCC 1
RST/RST 1
3 GND
TOP VIEW
(Not to Scale)
VCC 2
RST/RST 2
Figure 2. 3-Lead SOT-23 Pin Configuration
00064-014
ADM181x
3 GND
TOP VIEW
(Not to Scale)
00064-002
ADM181x
Figure 3. 3-Lead SC70 Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
SOT-23 SC70
1
2
Mnemonic
RST
RST
2
3
1
3
VCC
GND
Function
Active High Reset Output. RST remains high while VCC is below the reset
threshold and remains high for 150 ms typical after VCC rises above the reset
threshold. Applies to the ADM1812 and ADM1817 only.
Active Low Reset Output. RST remains low while VCC is below the reset threshold
and remains low for 150 ms typical after VCC rises above the reset threshold.
Applies to the ADM1810, ADM1811, ADM1813, ADM1815, ADM1816, and
ADM1818 only.
Supply Voltage. The supply voltage being monitored.
Ground. 0 V ground reference for all signals.
Rev. E | Page 5 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
TYPICAL PERFORMANCE CHARACTERISTICS
10
1.011
1.009
NORMALIZED RESET THRESHOLD
ICC @VCC = 5.5V
8
ICC @VCC = 3V
4
2
–20
0
20
30
50
70
85
TEMPERATURE (°C)
100
DEVIATION (RISE)
1.003
DEVIATION (FALL)
1.001
0.999
0.997
00064-003
0
–40
1.005
0.995
–40
120
Figure 4. Supply Current vs. Temperature
00064-006
ICC (μA)
6
1.007
–20
0
20
30
50
70
85
TEMPERATURE (°C)
100
120
Figure 7. Normalized Reset Threshold vs. Temperature
900
60
50
MAXIMUM TRANSIENT (μs)
700
600
500
VOD = 20mV
400
300
VOD = 125mV
200
30
20
VOD = 200mV
0
–40
–20
0
20
30
50
70
85
TEMPERATURE (°C)
100
0
10
120
Figure 5. Power-Down Reset Delay vs. Temperature
370
360
350
340
330
320
00064-005
310
290
–40
–20
0
20
30
50
70
85
TEMPERATURE (°C)
100
30
40
60
80 100 200 400
VTH – VCC (mV)
600
800 1000
Figure 8. Maximum Transient Duration Without Causing a Reset Pulse vs.
Reset Comparator Overdrive
380
300
00064-007
100
POWER-UP RESET TIMEOUT (ms)
40
10
00064-004
POWER-DOWN RESET DELAY (μs)
800
120
Figure 6. Power-Up Reset Timeout vs. Temperature
Rev. E | Page 6 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
THEORY OF OPERATION
PUSH-BUTTON TIME
TIMING DIAGRAMS FOR ALL DEVICES
RESET TIMEOUT
The following two timing diagrams are valid for ADM1810,
ADM1811, ADM1812, ADM1813, ADM1815, ADM1816,
ADM1817, and ADM1818.
VOLTAGE
INPUT LOW
VCC
Figure 12. Push-Button Reset Timing Diagram
VCC TRIP POINT (MAX)
VCC TRIP POINT
The ADM1818 range has 2.88 V and 2.55 V (typical) trip point
options that allow the user to monitor 3.3 V and 3 V supplies.
For 5 V monitoring requirements, the ADM1813 range has 4.62 V
and 4.35 V (typical) trip point options.
VCC TRIP POINT (MIN)
VCC TO RESET
DELAY
ADM1810, ADM1812, ADM1815, AND ADM1817
00064-008
RST
00064-011
VOLTAGE
INPUT HIGH
VOL
The ADM1812 is a 5 V supply monitor with an active high pushpull output and trip point options of 4.62 V and 4.35 V typical.
The ADM1810 is similar to the ADM1812, except that the
ADM1810 has an active low push-pull output stage. The ADM1817
is suitable for monitoring 3.3 V, 3 V, and 2.5 V supplies, with an
active high push-pull output and trip point options of 3.06 V,
2.88 V, 2.55 V, 2.31 V, and 2.18 V typical. The ADM1815 is similar
to the ADM1817, except that the ADM1815 has an active low
push-pull output stage.
Figure 9. Power-Down Timing Diagram
VCC TRIP POINT (MAX)
VCC TRIP POINT
VCC TRIP POINT (MIN)
VCC
RESET ACTIVE TIMEOUT
00064-009
The ADM1810/ADM1812/ADM1815/ADM1817 can connect
directly to most microprocessor reset inputs without the need for
external components.
RST
VCC
Figure 10. Power-Up Timing Diagram
ADM1810/
ADM1812/
ADM1815/
ADM1817
ADM1813 AND ADM1818
The ADM1813 and ADM1818 are low cost voltage monitoring
devices featuring an open-drain output and optional push-button
reset function.
MICROPROCESSOR
VCC
RST/RST
RESET
00064-012
GND
VCC
ADM1813/
ADM1818
VCC
RST
MICROPROCESSOR
Figure 13. ADM1810/ADM1812/ADM1815/ADM1817 Typical Application
RESET
ADM1811 AND ADM1816
The ADM1811 is a 5 V supply monitor with an active low opendrain output and trip point options of 4.62 V and 4.35 V typical.
The ADM1816 also has an active low open-drain output but is
suitable for monitoring lower voltage supplies of 3.3 V, 3 V,
and 2.5 V.
00064-010
GND
Figure 11. ADM1813/ADM1818 Typical Application
An optional push-button reset switch can be connected between
RST and ground. Pressing this switch pulls the reset output low. If
the push-button reset button pulls the RST output low for a period
greater than 1 μs when the reset button releases the RST line to
float high, then the RST line stays low for another 150 ms typical.
VCC
ADM1811/
ADM1816
MICROPROCESSOR
VCC
RST
RESET
00064-013
GND
Figure 14. ADM1811/ADM1816 Typical Application
Rev. E | Page 7 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
OUTLINE DIMENSIONS
3.04
2.80
1.40
1.20
3
2.64
2.10
1
2
0.60
0.45
1.03
0.89
2.05
1.78
1.12
0.89
0.100
0.013
0.180
0.085
0.51
0.37
0.55
REF
092707-A
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS TO-236-AB
Figure 15. 3-Lead Small Outline Transistor Package [SOT-23]
(RT-3)
Dimensions shown in millimeters
2.20
2.00
1.80
1.35
1.25
1.15
3
1
2
2.40
2.10
1.80
PIN 1
0.65 BSC
0.10 MAX
0.40
0.25
0.10 COPLANARITY
SEATING
PLANE
0.40
0.10
0.26
0.10
0.30
0.20
0.10
ALL DIMENSIONS COMPLIANT WITH EIAJ SC70
Figure 16. 3-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-3)
Dimensions shown in millimeters
Rev. E | Page 8 of 16
111505-0
1.10
0.80
1.00
0.80
ADM1810 to ADM1813/ADM1815 to ADM1818
ORDERING GUIDE
Model 1
ADM1810-5AKS-REEL
ADM1810-5AKS-RL7
ADM1810-5AKSZ-REEL 2
ADM1810-5AKSZ-RL72
ADM1810-5ART-REEL
ADM1810-5ART-REEL7
ADM1810-5ARTZ-REEL2
ADM1810-5ARTZ-RL72
ADM1810-10AKS-REEL
ADM1810-10AKS-RL7
ADM1810-10AKSZ-RL2
ADM1810-10AKSZ-RL72
ADM1810-10ART-REEL
ADM1810-10ART-RL7
ADM1810-10ARTZ-RL2
ADM1810-10ARTZ-RL72
ADM1811-5AKS-REEL
ADM1811-5AKS-RL7
ADM1811-5AKSZ-REEL2
ADM1811-5AKSZ-RL72
ADM1811-5ART-REEL
ADM1811-5ART-REEL7
ADM1811-5ARTZ-REEL2
ADM1811-5ARTZ-RL72
ADM1811-10AKS-REEL
ADM1811-10AKS-RL7
ADM1811-10AKSZ-RL2
ADM1811-10AKSZ-RL72
ADM1811-10ART-REEL
ADM1811-10ART-RL7
ADM1811-10ARTZ-RL2
ADM1811-10ARTZ-RL72
ADM1812-5AKS-REEL
ADM1812-5AKS-RL7
ADM1812-5AKSZ-REEL2
ADM1812-5AKSZ-RL72
ADM1812-5ART-REEL
ADM1812-5ART-REEL7
ADM1812-5ARTZ-REEL2
ADM1812-5ARTZ-RL72
ADM1812-10AKS-REEL
ADM1812-10AKS-RL7
ADM1812-10AKSZ-RL2
ADM1812-10AKSZ-RL72
ADM1812-10ART-REEL
ADM1812-10ART-RL7
ADM1812-10ARTZ-RL2
ADM1812-10ARTZ-RL72
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
Rev. E | Page 9 of 16
Package Option
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
Branding
MZV
MZV
M4Y
M4Y
MZV
MZV
M4Y
M4Y
MZT
MZT
M4Z
M4Z
MZT
MZT
M4Z
M4Z
M1V
M1V
M6Z
M6Z
M1V
M1V
M6Z
M6Z
M1T
M1T
M70
M70
M1T
M1T
M70
M70
MTV
MTV
M72
M72
MTV
MTV
M72
M72
MTT
MTT
M71
M71
MTT
MTT
M71
M71
ADM1810 to ADM1813/ADM1815 to ADM1818
Model 1
ADM1813-5AKS-REEL
ADM1813-5AKS-RL7
ADM1813-5AKSZ-REEL2
ADM1813-5AKSZ-RL72
ADM1813-5ART-RL
ADM1813-5ART-RL7
ADM1813-5ARTZ-RL2
ADM1813-5ARTZ-RL72
ADM1813-10AKS-REEL
ADM1813-10AKS-RL7
ADM1813-10AKSZ-RL2
ADM1813-10AKSZ-RL72
ADM1813-10ART-REEL
ADM1813-10ART-RL7
ADM1813-10ARTZ-RL2
ADM1813-10ARTZ-RL72
ADM1815-5AKS-REEL
ADM1815-5AKS-RL7
ADM1815-5AKSZ-REEL2
ADM1815-5AKSZ-RL72
ADM1815-5ART-REEL
ADM1815-5ART-REEL7
ADM1815-5ARTZ-REEL2
ADM1815-5ARTZ-RL72
ADM1815-10AKS-REEL
ADM1815-10AKS-RL7
ADM1815-10AKSZ-RL2
ADM1815-10AKSZ-RL72
ADM1815-10ART-REEL
ADM1815-10ART-RL7
ADM1815-10ARTZ-RL2
ADM1815-10ARTZ-RL72
ADM1815-20AKS-REEL
ADM1815-20AKS-RL7
ADM1815-20AKSZ-RL2
ADM1815-20AKSZ-RL72
ADM1815-20ART-RL
ADM1815-20ART-RL7
ADM1815-20ARTZ-RL2
ADM1815-20ARTZ-RL72
ADM1815-R22AKS-RL
ADM1815-R22AKS-RL7
ADM1815-R22AKSZ-RL2
ADM1815-R22AKSZ-R72
ADM1815-R22ART-RL
ADM1815-R22ART-RL7
ADM1815-R22ARTZ-RL2
ADM1815-R22ARTZ-R72
ADM1815-R23AKS-RL
ADM1815-R23AKS-RL7
ADM1815-R23AKSZ-RL2
ADM1815-R23AKSZ-R72
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.62 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
4.35 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
Rev. E | Page 10 of 16
Package Option
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
Branding
M3V
M3V
M6X
M6X
M3V
M3V
M6X
M6X
M3T
M3T
M6Y
M6Y
M3T
M3T
M6Y
M6Y
M5K
M5K
M73
M73
M5K
M5K
M73
M73
M5E
M5E
M4F
M4F
M5E
M5E
M4F
M4F
M5A
M5A
M76
M76
M5A
M5A
M76
M76
M5B
M5B
M74
M74
M5B
M5B
M74
M74
M5C
M5C
M75
M75
ADM1810 to ADM1813/ADM1815 to ADM1818
Model 1
ADM1815-R23ART-RL
ADM1815-R23ART-RL7
ADM1815-R23ARTZ-RL2
ADM1815-R23ARTZ-R72
ADM1816-5AKS-REEL
ADM1816-5AKS-REEL7
ADM1816-5AKSZ-REEL2
ADM1816-5AKSZ-RL72
ADM1816-5ART-REEL
ADM1816-5ART-REEL7
ADM1816-5ARTZ-REEL2
ADM1816-5ARTZ-RL72
ADM1816-10AKS-REEL
ADM1816-10AKS-RL7
ADM1816-10AKSZ-RL2
ADM1816-10AKSZ-RL72
ADM1816-10ART-REEL
ADM1816-10ART-RL7
ADM1816-10ARTZ-RL2
ADM1816-10ARTZ-RL72
ADM1816-20AKS-REEL
ADM1816-20AKS-RL7
ADM1816-20AKSZ-RL2
ADM1816-20AKSZ-RL72
ADM1816-20ART-REEL
ADM1816-20ART-RL7
ADM1816-20ARTZ-RL2
ADM1816-20ARTZ-RL72
ADM1816-R22AKS-RL
ADM1816-R22AKS-RL7
ADM1816-R22AKSZ-RL2
ADM1816-R22AKSZ-R72
ADM1816-R22ART-RL
ADM1816-R22ART-RL7
ADM1816-R22ARTZ-RL2
ADM1816-R22ARTZ-R72
ADM1816-R23AKS-RL
ADM1816-R23AKS-RL7
ADM1816-R23AKSZ-RL2
ADM1816-R23AKSZ-R72
ADM1816-R23ART-RL
ADM1816-R23ART-RL7
ADM1816-R23ARTZ-RL2
ADM1816-R23ARTZ-R72
ADM1817-5AKS-REEL
ADM1817-5AKS-REEL7
ADM1817-5AKSZ-REEL2
ADM1817-5AKSZ-RL72
ADM1817-5ART-REEL
ADM1817-5ART-REEL7
ADM1817-5ARTZ-REEL2
ADM1817-5ARTZ-RL72
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
2.31 V
2.31 V
2.31 V
2.31 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
Rev. E | Page 11 of 16
Package Option
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
Branding
M5C
M5C
M75
M75
M6K
M6K
M77
M77
M6K
M6K
M77
M77
M6E
M6E
M54
M54
M6E
M6E
M54
M54
M6A
M6A
M6H
M6H
M6A
M6A
M6H
M6H
M6B
M6B
M78
M78
M6B
M6B
M78
M78
M6C
M6C
M79
M79
M6C
M6C
M79
M79
M7K
M7K
M7F
M7F
M7K
M7K
M7F
M7F
ADM1810 to ADM1813/ADM1815 to ADM1818
Model 1
ADM1817-10AKS-REEL
ADM1817-10AKS-RL7
ADM1817-10AKSZ-RL2
ADM1817-10AKSZ-RL72
ADM1817-10ART-REEL
ADM1817-10ART-RL7
ADM1817-10ARTZ-RL2
ADM1817-10ARTZ-RL72
ADM1817-20AKS-REEL
ADM1817-20AKS-RL7
ADM1817-20AKSZ-RL2
ADM1817-20AKSZ-RL72
ADM1817-20ART-REEL
ADM1817-20ART-RL7
ADM1817-20ARTZ-RL2
ADM1817-20ARTZ-RL72
ADM1817-R22AKS-RL
ADM1817-R22AKS-RL7
ADM1817-R22AKSZ-RL2
ADM1817-R22AKSZ-R72
ADM1817-R22ART-RL
ADM1817-R22ART-RL7
ADM1817-R22ARTZ-RL2
ADM1817-R22ARTZ-R72
ADM1817-R23AKS-RL
ADM1817-R23AKS-RL7
ADM1817-R23AKSZ-RL2
ADM1817-R23AKSZ-R72
ADM1817-R23ART-RL
ADM1817-R23ART-RL7
ADM1817-R23ARTZ-RL2
ADM1817-R23ARTZ-R72
ADM1818-5AKS-REEL
ADM1818-5AKS-REEL7
ADM1818-5AKSZ-REEL2
ADM1818-5AKSZ-RL72
ADM1818-5ART-REEL
ADM1818-5ART-REEL7
ADM1818-5ARTZ-REEL2
ADM1818-5ARTZ-RL72
ADM1818-10AKS-REEL
ADM1818-10AKS-RL7
ADM1818-10AKSZ-RL2
ADM1818-10AKSZ-RL72
ADM1818-10ART-REEL
ADM1818-10ART-RL7
ADM1818-10ARTZ-RL72
ADM1818-20AKS-REEL
ADM1818-20AKS-RL7
ADM1818-20AKSZ-RL2
ADM1818-20AKSZ-RL72
ADM1818-20ART-REEL
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
3.06 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.88 V
2.55 V
2.55 V
2.55 V
2.55 V
2.55 V
Rev. E | Page 12 of 16
Package Option
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
Branding
M7E
M7E
M7G
M7G
M7E
M7E
M7G
M7G
M7A
M7A
M7H
M7H
M7A
M7A
M7H
M7H
M7B
M7B
M7J
M7J
M7B
M7B
M7J
M7J
M7C
M7C
M7L
M7L
M7C
M7C
M7L
M7L
M8K
M8K
M4T
M4T
M8K
M8K
M4T
M4T
M8E
M8E
M7P
M7P
M8E
M8E
M7P
M8A
M8A
M59
M59
M8A
ADM1810 to ADM1813/ADM1815 to ADM1818
Model 1
ADM1818-20ART-RL7
ADM1818-20ARTZ-RL2
ADM1818-20ARTZ-RL72
ADM1818-R22AKS-RL
ADM1818-R22AKS-RL7
ADM1818-R22AKSZ-RL2
ADM1818-R22AKSZ-R72
ADM1818-R22ART-RL
ADM1818-R22ART-RL7
ADM1818-R23AKS-RL
ADM1818-R23AKS-RL7
ADM1818-R23AKSZ-RL2
ADM1818-R23AKSZ-R72
ADM1818-R23ART-RL
ADM1818-R23ART-RL7
1
2
Temperature Range
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
−40°C to +105°C
Trip Point
2.55 V
2.55 V
2.55 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.18 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
2.31 V
Available only in reels.
Z = RoHS Compliant Part.
Rev. E | Page 13 of 16
Package Option
RT-3 (SOT-23)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
KS-3 (SC70)
RT-3 (SOT-23)
RT-3 (SOT-23)
Branding
M8A
M59
M59
M8B
M8B
M7M
M7M
M8B
M8B
M8C
M8C
M7N
M7N
M8C
M8C
ADM1810 to ADM1813/ADM1815 to ADM1818
NOTES
Rev. E | Page 14 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
NOTES
Rev. E | Page 15 of 16
ADM1810 to ADM1813/ADM1815 to ADM1818
NOTES
©1999–2008 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00064-0-8/08(E)
Rev. E | Page 16 of 16
Similar pages