AVAGO AV02-1496EN Standard smt and through hole lead bend options for subminiature led lamp Datasheet

Option 11, 12, 21, 22, 31, 32, 1L, 1S, 2L, 2S
Standard SMT and Through Hole Lead Bend Options
for Subminiature LED Lamps
Data Sheet
Description
Features
Subminiature lamps (HLMX-PXXX, HLMX-QXXX, HLMP6XXX, HLMP-70XX) are available with the above standard
options. Subminiature Lamps with Options 11, 12, 21, 22,
31, and 32 are suitable for surface mount applications
and their leads are formed with gull wing, yoke bend and
Z bend respectively. They are available in Tape and Reel
(compatible to ANSI/EIA RS-481) or bulk. Options 1L, 1S,
2L, and 2S are right angle lead bends suitable for through
hole applications.
• Surface mount lead configurations
Ordering Information
To order Subminiature Lamps packaged with these standard options, include the appropriate option code along
with the device catalog part number. Example: to order the
HLMP-6300-F00xx with Option 11 gull wing leads in 12 mm
embossed tape on 178 mm (7 inch) diameter reels, with
1500 lamps per reel; order as follows: HLMP-6300-F0011.
Order quantities must be placed in reel increments only.
Orders for partial reels will not be accepted. For additional
informa­tion, please contact your local Avago Technologies
sales office or franchised distributor for assistance.
HLMX-XXXX-X X X X X
Packaging Option
Color Bin Selection
Max. Iv Bin
Min. Iv Bin
4 x 4 Prod. Part Number
• Right angle lead bend for through hole mounting
• Tape and reel in accordance with ANSI/EIA RS-481
specifications
Selection Guide
Option
Code Package Configuration
Package
Outline
Drawing
11
A, H, K, L
12
Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel,
1500 Parts per Reel[1]
Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts[2]
Surface Mount
Lead
Configurations
14
Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
21
Yoke Leads, 12 mm Tape on 7 in. Dia. Reel
1500 Parts per Reel[1]
22
Yoke Leads, Bulk Packaging, Quantity of 500 Parts[2]
24
Yoke Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
31
Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel
1500 Parts per Reel[1]
32
34
1L
Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
2.54 mm (0.100 inch)
5.08 mm (0.200 inch)
2SCenter Lead Spacing
Notes:
C, J, K, L
Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts[2]
1SCenter Lead Spacing
2L
B, I, K, L
Long Leads; 10.4 mm (0.410 in.)
Right Angle Lead
Bends for
Short Leads; 3.7 mm (0.145 in.)
Through Hole
Long Leads; 9.2 mm (0.364 in.)Mounting
D
Short Leads; 3.7 mm (0.145 in.)
G
E
F
1. SMT lamps are supplied in 12 mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order quantities
must be in reel increments only. Orders for partial reels are not accepted.
2. Vapor barrier bags are used for bulk packaging.
Package Dimensions, Lead Bend Options
(A) Gull Wing Lead, Option 11, 12, and 14
CATHODE
ANODE
3.81 (0.150) MAX.
0.13 (0.005) R TYP.
0.79 (0.031)
0.53 (0.021)
0.13 (0.005)
MAX.
CATHODE
STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(B) “Yoke” Lead, Options 21, 22, and 24
CATHODE
STRIPE
Pkg A) Lamp – Gull Wing Lead
3.45
(0.136)
NOM.
0.13 (0.005) TYP.
0.33 (0.013) R. TYP.
1.07 (0.042) TYP.
0.79 (0.031)
0.53 (0.021)
7.62 (0.300) MAX.
CATHODE
ANODE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(C) Z-Bend Lead, Option 31, 32, and 34
CATHODE
STRIPE
4.06 (0.160)
4.57 (0.180)
0.79 (0.031)
0.53 (0.021)
0.76 (0.030)
0.51 (0.020)
3.05 (0.120)
NOM.
5.59 (0.220)
6.10 (0.240)
CATHODE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
ANODE
(D) Rt. Angle Bend Option 1L
Pkg C) Lamp – Z-Bend
10.16 (0.400)
10.67 (0.420)
2.54 (0.100)
NOM.
CATHODE
STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(E) Rt. Angle Bend Option 1S
3.43 (0.135)
3.94 (0.155)
2.54 (0.100)
NOM.
CATHODE
STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
Pkg E) Lamp – Rt Angle 1S
(F) Rt. Angle Bend Option 2L
9.50 (0.374)
8.92 (0.351)
5.08 (0.200)
NOM.
CATHODE
STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
(G) Rt. Angle Bend Option 2S
Pkg F) Lamp – Rt Angle 2L
3.43 (0.135)
3.94 (0.155)
5.08 (0.200)
NOM.
CATHODE
STRIPE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
Package Dimensions: Surface Mount Tape and Reel Options
(H) 12 mm Tape and Reel, Gull Wing Lead
PUSH PIN
HOLE, GULL
WING LEAD,
DOME ONLY
NOTES:
1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE.
2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm.
3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO.
4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE
CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
(I) 12 mm Tape and Reel, “Yoke” Lead
NOTES:
1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE.
2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm.
3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO.
4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE
CATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
(J) 12 mm Tape and Reel, Z-Bend Lead
Reel Dimensions All Dimensions
Per ANSI/EIA Are in Millimeters
Standard RS-481. (Inches).
7 inch Reel 13 Inch Reel
A
C
N
T
178.0 ± 2.0 (7.0 ± 0.08) Dia.
13.0 (0.512) Dia. Typ.
50.0 (1.97) Min.
18.4 (0.72) mMax.
330 (12.9) Dia. Max.
13.0 (0.512) Dia. Typ.
100.0 (3.93) Min.
18.4 (0.72) Max.
Embossed Carrier
All Dimensions
Tape Dimensions
Are in Millimeters
Per ANSI/EIA
(Inches).
Standard RS-481.
Yoke and
Gull Wing Dome Gull Wing Flat Top Yoke Dome Z-Bend Dome Z-Bend Flat Top
D 1.55 (0.061 ± 0.002) Dia.
1.55 (0.061 ± 0.002) Dia.
1.55 (0.061 ± 0.002) Dia.
(0.059 + 0.004) Dia.
D1 1.0 (0.039) Dia. Min.
N/A (No Push Pin Hole)
N/A (No Push Pin Hole)
D2 20.2 (0.795) Dia. Min.
20.2 (0.795) Dia. Min.
20.2 (0.795) Dia. Min.
E 1.75 ± 0.1 (0.069)
1.75 ± 0.1 (0.069)
1.75 ± 0.1 (0.069)
F
5.50 ± 0.05 (0.217 ± 0.002)
K0 3.05 ± 0.1 (0.120) Typ.
2.54 ± 0.1 (0.100) Typ.
3.05 ± 0.1 (0.120) Typ.
P 4.0 (0.157) Typ.
4.0 (0.157) Typ.
4.0 (0.157) Typ.
P0 4.0 (0.157) Typ.
4.0 (0.157) Typ.
4.0 (0.157) Typ.
P2 2.0 (0.079 ± 0.002)
2.0 (0.079 ± 0.002)
2.0 (0.079 ± 0.002)
t 0.3 (0.012) Typ.
0.3 (0.012) Typ.
0.3 (0.012) Typ.
W 12.0 ± 0.3 (0.472 ± 0.012)
12.0 ± 0.3 (0.472 ± 0.012)
12.0 ± 0.3 (0.472 ± 0.012)
1.50 + 0.10
(0.059 + 0.004) Dia.
1.50 + 0.25
(0.059 + 0.010)
20.2 (0.795) Dia. Min.
1.75 ± 0.1 (0.069)
2.97 ± 0.1 (0.117) Typ.
4.0 (0.157) Typ.
4.0 (0.157) Typ.
2.0 (0.079 ± 0.002)
0.305 ± 0.013
(0.0120 ± 0.0005)
12.0 ± 0.3 (0.472 ± 0.012)
1.50 + 0.10
N/A (No Push Pin Hole)
20.2 (0.795) Dia. Min.
1.75 ± 0.1 (0.069)
3.05 ± 0.1 (0.120) Typ.
4.0 (0.157) Typ.
4.0 (0.157) Typ.
2.0 (0.079 ± 0.002)
0.305 ± 0.013
(0.0120 ± 0.0005)
12.0 ± 0.3 (0.472 ± 0.012)
(K) 12 mm Tape and Reel
PART:
LOT NO:
Storage Condition: 5 to 30˚C @ 60% RH max.
CUST PART:
QTY:
D/C:
TAPE DATE:
Baking is required under the following conditions:
a) Humidity Indicator Card is >10% when read at 23 ± 5°C.
b) The pack has been opened for more than 1 week.
Baking recommended condition: 60 ± 5˚C for 20 hours.
10
CAT:
BIN:
QA INSP.
C/O:
(L) Recommended Reflow Soldering Profile and Soldering Pad Pattern for SMT Options
10 - 30 SEC.
255 - 260 °C
3 °C/SEC. MAX.
+5
230 –0 °C MAX.
3°C/SEC. MAX.
TEMPERATURE
TEMPERATURE
10 SEC. MAX.
183°C
125-170°C
3-4°C/SEC.
2-3°C/SEC.
6 °C/SEC. MAX.
150 °C
3 °C/SEC. MAX.
50°C
60-150
SEC.
120 SEC. MAX.
217 °C
200 °C
100 SEC. MAX.
60 - 120 SEC.
25°C
TIME
TIME
(Acc. to J-STD-020C)
Recommended SnPb reflow soldering profile.
Wait until device has cooled to room temperature before handling.
0.89
(0.035)
Recommended Pb-free reflow soldering profile.
0.45
(0.018)
0.89 (0.035)
1.78
(0.070)
0.45 (0.018)
3.58 (0.140)
Recommended soldering pad pattern for gull wing leads 11, 12, and 14.
#27 DRILL
3.73 (0.147) DIA.
CLEARANCE HOLE
THROUGH PC BOARD
#27 DRILL
3.73 (0.147) DIA.
CLEARANCE HOLE
THROUGH PC BOARD
1.27
(0.50)
0.45
(0.018)
1.27
(0.50)
0.89
(0.035)
0.64 (0.025)
3.30 (0.130)
6.60 (0.260)
0.89
(0.035)
0.45
(0.018)
3.30 (0.130)
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
Recommended soldering pad pattern for yoke leads 21, 22, and 24.
For product information and a complete list of distributors, please go to our website:
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
6.60 (0.260)
Recommended soldering pad pattern for Z-bend leads 31, 32, and 34.
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. Obsoletes 5989-1206EN
AV02-0069EN - September 2, 2008
Similar pages