Microsemi GC1609 Control devices 45 volt abrupt junction tuning varactor Datasheet

GC1600A – GC1613
®
TM
CONTROL DEVICES
45 Volt Abrupt Junction Tuning Varactors
RoHS Compliant
KEY FEATURES
DESCRIPTION
 Highest Q for 45 Volt Varactors
 Lowest Rs
www.MICROSEMI.com
The GC1600 series varactors are silicon abrupt junction devices. They offer the
highest Q and lowest series resistance available in a 45 Volt silicon varactor.
 Large selection of capacitance
values to chose from
This series of diodes meets RoHS requirements per EU Directive
2002/95/EC. The standard terminal finish is gold unless otherwise specified.
Consult the factory if you have special requirements.
 Low phase noise
 RoHS Compliant1
APPLICATIONS
1
The GC1600 series varactors are used for narrow to moderate bandwidth tuning.
They are available in values appropriate for VHF through KU band frequencies.
These devices are best used in low phase noise voltage controlled oscillators, low
loss voltage variable filters and phase shifters.
Most or our devices are supplied with
Gold plated terminations. Other
terminal finishes are available on
request. Consult factory for details.
Standard capacitance tolerance is ±10% other capacitance values and custom
mechanical configurations are also available. All specifications shown are based on
style 30 package and include 0.18 pF case capacitance. Consult package outline
section of this catalog for other case styles available. Complete electrical and
mechanical data is also provided.
APPLICATIONS/BENEFITS
 VHF to Ku Band Tuning
 VVF (Voltage Variable Filters)
 Phase Shifters
ABSOLUTE MAXIMUM RATINGS AT 25º C
(UNLESS OTHERWISE SPECIFIED)
Rating
Symbol
Value
Unit
Minimum Breakdown Voltage @10 uA
Maximum Leakage Current
@35 Volts
Operating Temperature
VB
V
uA
TOP
45
0.02 @ 25 ºC
2.0 @125 ºC
-55 to +125
TSTG
-65 to +150
ºC
TCC
300
ppm/ ºC
ºC
GC1600A – GC1613
Storage Temperature
Thermal Coefficient of Capacitance
@4 Volts
IR
IMPORTANT: For the mostcurrentdata,consultMICROSEMI’s website: www.microsemi.com
Specifications are subject to change, consult the factory for further information.
These devices are ESD sensitive and must be handled use using ESD precautions.
Copyright  2006
Rev: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 1
GC1600A – GC1613
®
TM
CONTROL DEVICES
45 Volt Abrupt Junction Tuning Varactors
RoHS Compliant
www.MICROSEMI.com
ELECTRICAL CHARACTERISTICS @ 25º C
Quality Factor3
Capacitance Ratio2
CT -4
(Min)
(Min)
+ / - 10%
Model Number
(Note 2)
GC1600A – 00
@ -4V
(pF)
@-4V, 50 MHz
CT0 / CT-45
0.6
3000
4.0
GC1600 – 30
0.8
2900
4.2
GC1601 – 30
1.0
2800
4.4
GC1602 – 30
1.2
2800
4.5
GC1603 – 30
1.5
2300
4.8
GC1604 – 30
1.8
2000
4.9
GC1605 – 30
2.2
2000
5.0
GC1606 – 30
2.7
1900
5.2
GC1607 – 30
3.3
1900
5.3
GC1608 – 30
3.9
1900
5.4
GC1609 – 30
4.7
1500
5.4
GC1610 – 30
5.6
1700
5.5
GC1611 – 30
6.8
1700
5.5
GC1612 – 30
8.2
1500
5.6
GC1613 – 30
10.0
1500
5.6
Notes
1)
2)
3)
When ordering, specify the desired case style suffix to the model. (eg. GC1601 – 30)
Capacitance values include a package capacitance of 0.18 pF. Capacitance is measures at F = 1 MHz.
Q is calculated from:
1 / 2fRs 4Cj 4
a.
Q=
b.
c.
Rs is measured using @ 1 GHz using transmission loss techniques.
Capacitances is measured at 1 MHz
ELECTRICALS
Copyright  2006
Rev: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 2
GC1600A – GC1613
®
TM
CONTROL DEVICES
45 Volt Abrupt Junction Tuning Varactors
RoHS Compliant
TYPICAL CJ VS REVERSE BIAS
NOTES
-
STYLE 00
CHIP DIMENSIONS VARY BY PRODUCT
OTHER PACKAGE STYLES AVAILABLE
ON REQUEST
CONSULT FACTORY FOR DETAILS
www.MICROSEMI.com
-
STYLE 30
MECH/ELEC
Copyright  2006
Rev: 2009-01-19
Microsemi
Microwave Products
75 Technology Drive, Lowell, MA. 01851, 978-442-5600, Fax: 978-937-3748
Page 3
Similar pages