TSC FR1601G 16.0 amps. glass passivated fast recovery rectifier Datasheet

FR1601G - FR1607G
Pb
16.0 AMPs. Glass Passivated Fast Recovery Rectifiers
TO-220AB
RoHS
COMPLIANCE
Features
Glass passivated chip junction.
High efficiency, Low VF
High Current capability
High reliability
High Surge current capability
Low power loss
For use in low voltage , high frequency inventor,
free wheeling and polarity portection application
Green compound with suffix "G" on packing code
& prefix "G" on datecode.
Mechanical Data
Cases: TO-220AB Molded plastic
Epoxy: UL 94V-O rate flame retardant
Terminal : Pure tin plated, lead free, solderable
per MIL-STD-202, Method 208 guaranteed
Polarity: As marked
Dimensions in inches and (millimeters)
High temperature soldering guaranteed:
260oC/10 seconds .16"(4.06mm) from case.
Weight: 2.24 gram
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number
Symbol
FR
1601G
FR
1602G
FR
1603G
FR
1604G
FR
1605G
FR
1606G
FR
1607G
Units
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Maximum Average Forward Rectified @Tc = 105℃
Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method )
I(AV)
16.0
A
IFSM
150
A
Maximum Instantaneous Forward Voltage @ 8.0A
VF
1.3
V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage @ TA=125℃
IR
5.0
100
uA
Typical Junction Capacitance (Note 1)
Cj
60
pF
Typical Reverse Recovery Time (Note 2)
TRR
Typical Thermal Resistance (Note 3)
RθJC
3.0
TJ
-65 to +150
O
C
-65 to +150
O
C
Operating Temperature Range
Storage Temperature Range
TSTG
150
250
500
nS
O
C/W
Note 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C.
2. Reverse rRecovery Time Condition : IF=0.5A, IR=1.0A, IRR=0.25A
3. Mount on P.C. Board with 2"x3"x0.25" Al plate
Page :1 of 2
Version : C09
Page :2 of 2
Version : C09
Similar pages