SBR10U200CT SBR10U200CTFP SBR10U200CTB 10A SBR® SUPER BARRIER RECTIFIER Please click here to visit our online spice models database. NEW PRODUCT Features • • • • • Mechanical Data • • Ultra Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability Lead Free Finish, RoHS Compliant (Note 2) 2 Case: TO-220AB, ITO-220AB, D Pak Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: TO-220AB – 2.1 grams (approximate) ITO-220AB – 1.9 grams (approximate) 2 D Pak – 1.6 grams (approximate) • • • • • TO-220AB Maximum Ratings D2Pak ITO-220AB Package Pin Out Configuration @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 140ºC Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2uS-1Khz) Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 200 V 141 10 V A IFSM 150 A IRRM 3 A Symbol Value Unit RθJC 2 4 -65 to +175 ºC/W Thermal Characteristics Characteristic Maximum Thermal Resistance (per leg) 2 Package = TO-220AB & D Pak Package = ITO-220AB Operating and Storage Temperature Range Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) TJ, TSTG @TA = 25°C unless otherwise specified Symbol V(BR)R Min 200 Typ - Max - Unit V Forward Voltage Drop VF - 0.60 - 0.82 0.65 0.88 V Leakage Current (Note 1) IR - - 0.2 25 mA - 24 30 Reverse Recovery Time trr Notes: ºC - 20 25 Test Condition IR = 0.2mA IF = 5A, TJ = 25ºC IF = 5A, TJ = 125ºC IF = 10A, TJ = 25ºC VR = 200V, TJ = 25ºC VR = 200V, TJ = 125ºC IF = 0.5A, IR = 1A, IRR = 0.25A ns IF = 1A, VR = 30V, di/dt = 100A/μs, TJ = 25ºC 1. Short duration pulse test used to minimize self-heating effect. 2. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. SBR is a registered trademark of Diodes Incorporated. SBR10U200 Document number: DS30990 Rev. 5 - 2 1 of 4 www.diodes.com April 2008 © Diodes Incorporated SBR10U200CT SBR10U200CTFP SBR10U200CTB IF, INSTANTANEOUS FORWARD CURRENT (A) IF(AVE), AVERAGE FORWARD CURRENT (A) 4 3 2 1 0 100 10 Tj=175°C 1 Tj=125°C Tj=75°C Tj=25°C 0.1 0 25 50 75 100 125 150 175 0.1 0.2 0.3 T C, CASE TEMPERATURE (°C) 0.4 0.5 0.6 0.7 0.8 0.9 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 1: Current Derating Curve, Per Element IR, INSTANTANEOUS REVERSE CURRENT (mA) NEW PRODUCT 5 Figure 2: Typical Forward Characteristics, Per Element 10 1 Tj=175°C 0.1 Tj=125°C 0.01 Tj=75°C 0.001 Tj=25°C 0.0001 0 50 100 150 200 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3: Typical Reverse Characteristics, Per Element Ordering Information (Note 3) Part Number SBR10U200CT SBR10U200CTFP SBR10U200CTB Notes: Case TO-220AB ITO-220AB 2 D Pak Packaging 50 pieces/tube 50 pieces/tube 50 pieces/tube 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information SBR SBR10U200CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) 10U200CT YYWW AB YYWW AB SBR 10U200CTB YYWW AB SBR10U200CTB = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) SBR is a registered trademark of Diodes Incorporated. SBR10U200 Document number: DS30990 Rev. 5 - 2 SBR 10U200CTFP SBR10U200CTFP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) 2 of 4 www.diodes.com April 2008 © Diodes Incorporated SBR10U200CT SBR10U200CTFP SBR10U200CTB Package Outline Dimensions A E SEATING PLANE Q H1 D D1 1 2 3 L1 b2 L NEW PRODUCT A1 P b e c A2 e1 A E F ØP Q + D Not Through Holes 1 2 3 b2 L1 A1 L2 J1 b1 L b c e Notes: TO-220AB Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 c 0.356 0.61 D 14.22 16.51 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 L 12.70 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm ITO-220AB ALTERNATE (Note 4) DIM. MIN. MAX. A 4.30 4.70 A1 1.3 b 0.50 0.75 b1 1.10 1.35 b2 1.50 1.75 c 0.50 0.75 D 14.80 15.20 E 9.96 10.36 e 2.54 typ F 2.80 3.20 J1 2.50 2.90 L 12.80 13.60 L1 1.70 1.90 L2 1.90 2.10 ØP 3.50 typ Q 2.70 typ All Dimensions in mm ØP E A A1 Q 10° D 5° 5° D1 L1 1 2 3 5° 5° 3 x b1 A2 L 3xb 2xe c ITO-220AB (Note 4) Dim Min Typ Max A 4.50 4.70 4.90 A1 3.04 3.24 3.44 A2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 D 15.67 15.87 16.07 D1 8.99 9.19 9.39 e 2.54 E 9.91 10.11 10.31 L 9.45 9.75 10.05 L1 15.80 16.00 16.20 P 2.98 3.18 3.38 Q 3.10 3.30 3.50 All Dimensions in mm 2 L1 E D 1 K H 2 L2 e b b1 c A a L D PAK Dim Min Max A 4.07 4.82 b 0.51 0.99 b1 1.15 1.77 c 0.356 0.58 c1 1.143 1.65 D 8.39 9.65 E 9.66 10.66 e 2.54 Typ. H 14.61 15.87 L 1.78 2.79 L1 1.67 ⎯ L2 1.77 ⎯ a 0° 8° All Dimensions in mm c1 4. For product manufactured with Date Code 0733 (week 33, 2007) and newer, please refer to ITO-220AB dimensions. For product manufactured prior to Date Code 0733, please refer to ITO-220AB ALTERNATE dimensions. Suggested Pad Layout 2 Z D Pak Dimensions Value (in mm) Z 16.9 X1 1.1 X2 10.8 Y1 3.5 Y2 11.4 C 9.5 E1 2.5 C E1 X2 X1 Y1 Y2 SBR is a registered trademark of Diodes Incorporated. SBR10U200 Document number: DS30990 Rev. 5 - 2 3 of 4 www.diodes.com April 2008 © Diodes Incorporated NEW PRODUCT SBR10U200CT SBR10U200CTFP SBR10U200CTB IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR is a registered trademark of Diodes Incorporated. SBR10U200 Document number: DS30990 Rev. 5 - 2 4 of 4 www.diodes.com April 2008 © Diodes Incorporated