Hittite HMC304MS8E Gaas mmic high ip3 single-balanced smt mixer, 1.7 - 3 ghz Datasheet

HMC304MS8 / 304MS8E
v01.0705
GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz
Typical Applications
Features
The HMC304MS8 / HMC304MS8E is ideal for:
High Dynamic Range: +30 dBm IIP3
• PCS & 3G
No External Components or Bias Required
• 2.4 GHz ISM
LO/RF Isolation: 30 dB
• MMDS
Ultra Small MSOP8 Package: 14.8 mm2
Functional Diagram
General Description
MIXERS - SGL-BAL - SMT
9
The HMC304MS8 & HMC304MS8E are passive
high IP3 mixers in 8 lead plastic surface mount Mini
Small Outline Packages (MSOP). This miniature
single balanced MMIC mixer is constructed of GaAs
Schottky diodes and novel planar transformer
baluns on the chip while not requiring any external
components. The RF port is balanced via the MMIC
balun while the LO port is connected directly to the
diodes. LO isolations are typically 20 to 30 dB.
Excellent input IP3 performance of +27 to +32 dBm
make the HMC304MS8(E) ideal for high dynamic
range applications.
Electrical Specifi cations*, TA = +25° C
LO = +17 dBm
IF = 100 MHz
Parameter
Min.
Typ.
LO = +17 dBm
IF = 100 MHz
Max.
Min.
Typ.
Units
Max.
Frequency Range, RF & LO
1.7 - 3.0
2.2 - 2.7
GHz
Frequency Range, IF
DC - 0.8
DC - 0.8
GHz
Conversion Loss
9
11
9
10.5
dB
Noise Figure (SSB)
9
11
9
10.5
dB
LO to RF Isolation
20
30
23
32
dB
LO to IF Isolation
12
20
17
25
dB
IP3 (Input)
25
30
27
32
dBm
1 dB Gain Compression (Input)
15
19
18
19.5
dBm
*Specifi cations are for downconverter performance. Similar results are achieved when using mixer as an
upconverter with a resulting input IP3 of 5dB less.
9 - 160
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC304MS8 / 304MS8E
v01.0705
GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz
Conversion Gain vs.
Temperature @ LO = +17 dBm
Isolation @ LO = +17 dBm
0
-10
-5
-10
-40 C
+25 C
+85 C
-15
-20
RF/IF
LO/RF
LO/IF
-40
-20
-50
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.25
3.5
1
1.25
1.5
1.75
FREQUENCY (GHz)
2.25
2.5
2.75
3
3.25
3.5
3
3.25
3.5
Return Loss @ LO = +17 dBm
0
-5
-5
RETURN LOSS (dB)
0
-10
+19 dBm
+17 dBm
+15 dBm
+13 dBm
-15
2
FREQUENCY (GHz)
Conversion Gain vs. LO Drive
-10
-15
RF
-20
LO
-20
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
3.25
3.5
1
1.25
1.5
1.75
FREQUENCY (GHz)
2
2.25
2.5
2.75
FREQUENCY (GHz)
If Bandwidth @ LO = +17 dBm
IF CONVERSION GAIN & RETURN LOSS (dB)
CONVERSION GAIN (dB)
9
-30
MIXERS - SGL-BAL - SMT
ISOLATION (dB)
CONVERSION GAIN (dB)
0
0
Conversion Gain
-5
-10
-15
IF Return Loss
-20
0
0.25
0.5
0.75
1
1.25
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 161
HMC304MS8 / 304MS8E
v01.0705
GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz
Input IP3 vs.
Temperature @ LO = +17dBm
40
40
38
38
36
36
34
34
IP3 (dBm)
9
IP3 (dBm)
Input IP3 vs. LO Drive
32
30
28
30
28
26
26
24
20
1.5
1.75
2
2.25
2.5
2.75
+25 C
-40 C
+85 C
24
+19 dBm
+17 dBm
+15 dBm
22
22
3
3.25
20
1.5
3.5
1.75
2
FREQUENCY (GHz)
2.25
2.5
2.75
3
3.25
3.5
FREQUENCY (GHz)
P1dB vs. Temperature @ LO = +17 dBm
25
24
23
+85 C
-40 C
+25 C
22
P1dB (dBm)
MIXERS - SGL-BAL - SMT
32
21
20
19
18
17
16
15
1.5
1.75
2
2.25
2.5
2.75
3
3.25
3.5
FREQUENCY (GHz)
MxN Spurious Outputs
Harmonics of LO
nLO
0
1
2
3
4
0
xx
-20
-11
2
7
1
10
0
32
29
31
2
50
61
62
52
59
3
89
90
93
85
81
4
>107
>107
>107
RF = 2 GHz @ -10 dBm
LO = 1.9 GHz @ +17 dBm
All values in dBc relative to the IF power level.
9 - 162
nLO Spur at RF Port
mRF
>107
>107
LO Frequency
(GHz)
1
2
3
1.5
34
18
32
49
1.9
34
18
32
48
2.3
32
22
36
58
2.7
25
26
39
73
3.1
23
29
35
64
3.6
17
31
36
57
4
LO = +17 dBm
Values in dBc below input LO level measured at the RF port.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC304MS8 / 304MS8E
v01.0705
GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz
Absolute Maximum Ratings
RF / IF Input
+27 dBm
LO Drive
+27 dBm
DC Current into IF Port
±9 mA
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
9
MIXERS - SGL-BAL - SMT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC304MS8
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC304MS8E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H304
XXXX
[2]
H304
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 163
HMC304MS8 / 304MS8E
v01.0705
GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz
Recommended PCB Layout
MIXERS - SGL-BAL - SMT
9
List of Materials for Evaluation PCB 102781 [1]
Item
Description
J1, J2, J3
PCB Mount SMA RF Connector
U1
HMC304MS8 / HMC304MS8E Mixer
PCB [2]
102643 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
9 - 164
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads should be connected directly to the
ground plane similar to that shown below. A sufficient number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board as shown is available from Hittite upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC304MS8 / 304MS8E
v01.0705
GaAs MMIC HIGH IP3 SINGLEBALANCED SMT MIXER, 1.7 - 3 GHz
Notes:
MIXERS - SGL-BAL - SMT
9
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
9 - 165
Similar pages